Page 1 of 1

125W Sony Movie Channel

Posted: Sat Oct 02, 2021 12:16 am
by machteck
Anyone know what is going on with the Sony Movie channel 125W tp 3900 V 29079 message across screen continuous for operators to call number to get the proper feed.

Re: 125W Sony Movie Channel

Posted: Tue Oct 05, 2021 12:05 am
by Channel Master
It is leaving 125 west and going to ses 3 sat-103. 3945 v 25000. Will no longer be on 125west at some point in time.

Re: 125W Sony Movie Channel

Posted: Tue Oct 05, 2021 12:22 am
by machteck
Channel Master wrote:
Tue Oct 05, 2021 12:05 am
It is leaving 125 west and going to ses 3 sat-103. 3945 v 25000. Will no longer be on 125west at some point in time.
Thank you, Lyngsat is reporting it has moved to 103 w but i can not get it to scan in. Thanks again.

Re: 125W Sony Movie Channel

Posted: Tue Oct 05, 2021 12:44 am
by Channel Master
It is there on 103 west sat. The signal is weaker than all the others. I use this tp to fine tune 103 west. Getting it with 8 ft. unimesh. Using old reliable skew setting at dish with polarotor. You really have to be spot or scan will miss it. Try inputting the freq. manually, then try to peak system. That is how I found it a while back.

Re: 125W Sony Movie Channel

Posted: Wed Oct 06, 2021 12:21 am
by machteck
Channel Master wrote:
Tue Oct 05, 2021 12:44 am
It is there on 103 west sat. The signal is weaker than all the others. I use this tp to fine tune 103 west. Getting it with 8 ft. unimesh. Using old reliable skew setting at dish with polarotor. You really have to be spot or scan will miss it. Try inputting the freq. manually, then try to peak system. That is how I found it a while back.
You are right i found it. Thanks again.