125W Sony Movie Channel

Please discuss the softcam feature ,share the softcam key...

Moderators: admin, GTMedia Team

Post Reply
machteck
Posts: 233
Joined: Thu Dec 28, 2017 4:25 pm
Location: EctorTexas

125W Sony Movie Channel

Post by machteck »

Anyone know what is going on with the Sony Movie channel 125W tp 3900 V 29079 message across screen continuous for operators to call number to get the proper feed.
Larry

Channel Master
Posts: 97
Joined: Wed Apr 19, 2017 12:53 pm

Re: 125W Sony Movie Channel

Post by Channel Master »

It is leaving 125 west and going to ses 3 sat-103. 3945 v 25000. Will no longer be on 125west at some point in time.

machteck
Posts: 233
Joined: Thu Dec 28, 2017 4:25 pm
Location: EctorTexas

Re: 125W Sony Movie Channel

Post by machteck »

Channel Master wrote:
Tue Oct 05, 2021 12:05 am
It is leaving 125 west and going to ses 3 sat-103. 3945 v 25000. Will no longer be on 125west at some point in time.
Thank you, Lyngsat is reporting it has moved to 103 w but i can not get it to scan in. Thanks again.
Larry

Channel Master
Posts: 97
Joined: Wed Apr 19, 2017 12:53 pm

Re: 125W Sony Movie Channel

Post by Channel Master »

It is there on 103 west sat. The signal is weaker than all the others. I use this tp to fine tune 103 west. Getting it with 8 ft. unimesh. Using old reliable skew setting at dish with polarotor. You really have to be spot or scan will miss it. Try inputting the freq. manually, then try to peak system. That is how I found it a while back.

machteck
Posts: 233
Joined: Thu Dec 28, 2017 4:25 pm
Location: EctorTexas

Re: 125W Sony Movie Channel

Post by machteck »

Channel Master wrote:
Tue Oct 05, 2021 12:44 am
It is there on 103 west sat. The signal is weaker than all the others. I use this tp to fine tune 103 west. Getting it with 8 ft. unimesh. Using old reliable skew setting at dish with polarotor. You really have to be spot or scan will miss it. Try inputting the freq. manually, then try to peak system. That is how I found it a while back.
You are right i found it. Thanks again.
Larry

Post Reply

Return to “Softcam :Biss/PowerVu/Tandberg”