Page 5 of 7

Re: PowerVu Keys 58.0W 3720/V/30000

Posted: Thu Jan 30, 2020 4:00 am
by romo arturo
leunam2017 wrote:
Sun Mar 11, 2018 8:06 pm
Gracias amigos. Ya me hicieron llegar las llaves. Excelente soporte.

Thanks friends. They already sent me the keys. Excellent support
Buenas noches, soy nuevo en esto, serian tan amables de enviarme las keys para el satelite 58.0 W, les quedare muy agradecido

Muchas gracias

Re: PowerVu Keys 58.0W 3720/V/30000

Posted: Thu Jan 30, 2020 3:44 pm
by cpr43
romo arturo wrote:
Thu Jan 30, 2020 4:00 am
leunam2017 wrote:
Sun Mar 11, 2018 8:06 pm
Gracias amigos. Ya me hicieron llegar las llaves. Excelente soporte.

Thanks friends. They already sent me the keys. Excellent support
Buenas noches, soy nuevo en esto, serian tan amables de enviarme las keys para el satelite 58.0 W, les quedare muy agradecido

Muchas gracias
Hola y Bienvenido

Favor de leer las reglas del foro aqui:

viewtopic.php?f=47&t=16325

Re: PowerVu Keys 58.0W 3720/V/30000

Posted: Mon Feb 03, 2020 5:27 pm
by Polkas
Buenos días alguien que me pueda pasar las llaves del 58w porfa y gracias

Re: PowerVu Keys 58.0W 3720/V/30000

Posted: Sat Feb 08, 2020 1:56 am
by ironwill.zero
Hola, tengo dudas sobre EEM y softcam.key, como se asocian estos conceptos? Si alguien pudiese facilitarme alguno de estos, estaria muy agradecido. Saludos

Discovery SOLO Audios.

Posted: Fri Aug 14, 2020 1:31 am
by ariadnathalia
Hola a todos (as), desde hace unas semanas, los canales de discovery en los satelites Intelsat 21 (58w) y el Intelsat 11 (43.1w), tienen el VIDEO CERRADO, solamente el audio abierto, y creeo que esa es la causa por la que mi freesat v7 no esta haciendo el autorrol, Sabe alguien de alguna solucion al respecto?, o es que mi llaves ya no estan funcionando. Si pueden ayudarme a encontrar una solucion, se los agradezco de antemano.

Re: PowerVu Keys 58.0W 3720/V/30000

Posted: Fri Aug 14, 2020 1:35 am
by ariadnathalia
Las llaves EEM, son las encargadas de hacer el autorrol del receptor, y son el complemeto de las llaves ECM, que normalmente estan en pares, El softcam .key es el archivo de texto que se agrega al receptor, y que incluye los datos de las llaves powervu, biss, tandberg etc. Espero sirva la respuesta

Re: PowerVu Keys 58.0W 3720/V/30000

Posted: Fri Aug 14, 2020 3:10 am
by kroll
Las llaves Emm son las "maestras" ,ellas se encargan de crear la ecm key actual nesesaria para abrir la encripcion ,al menos asi lo entiendo yo.
ambas emm y ecm les llega el momento de ser obsoletas ( obviamente mientras tus emm sean validas estan seguiran generando las ecm nesesarias) saludos :D

Re: PowerVu Keys 58.0W 3720/V/30000

Posted: Mon Aug 31, 2020 4:25 pm
by Zuli Moreno
Existe algún cambio en la llave del transponder 3720? mi V7 si tenia servicio en ese transponder y la perdi el dia de hoy, si hay una llave nueva me la podrian proporcionar, o como puedo arreglar el V7 HD, tiene el ultimo software
gracias

Re: PowerVu Keys 58.0W 3720/V/30000

Posted: Mon Aug 31, 2020 10:10 pm
by fjlv1972
buen dia, me ´podrian apoyar con el EMM 3720 V 30000 del 58w PW, de antemano gracias

Re: PowerVu Keys 58.0W 3720/V/30000

Posted: Wed Sep 02, 2020 3:36 pm
by Zuli Moreno
Buen dia, saben si estan haciendo cambios en este transponder 3720 , la lleve duro dos dias, tengo actualizado mi V7 con el ultimo software, me podrian ayudar con las llaves por favor
muy agradecido con su apoyo
gracias
PD si tienen llaves nuevas del 55 W tambien se los agradezco

Re: PowerVu Keys 58.0W 3720/V/30000

Posted: Wed Sep 02, 2020 5:49 pm
by iq180
Zuli Moreno wrote:
Wed Sep 02, 2020 3:36 pm
Buen dia, saben si estan haciendo cambios en este transponder 3720 , la lleve duro dos dias, tengo actualizado mi V7 con el ultimo software, me podrian ayudar con las llaves por favor
muy agradecido con su apoyo
gracias
PD si tienen llaves nuevas del 55 W tambien se los agradezco
PM sent.

Re: PowerVu Keys 58.0W 3720/V/30000

Posted: Thu Sep 03, 2020 2:19 pm
by Jhonfiamme
Hola, ayuda con la key de 58w

Re: PowerVu Keys 58.0W 3720/V/30000

Posted: Fri Sep 04, 2020 6:02 pm
by Albert Cosmos
Please i just set up my new gtmedia v9 super. I will be grateful if anyone can give me a softcam key to load and try the device. The device is virtually empty. no keys in it. Please help. Thanks

Re: PowerVu Keys 58.0W 3720/V/30000

Posted: Sun Sep 06, 2020 1:42 pm
by cpr43
Albert Cosmos wrote:
Fri Sep 04, 2020 6:02 pm
Please i just set up my new gtmedia v9 super. I will be grateful if anyone can give me a softcam key to load and try the device. The device is virtually empty. no keys in it. Please help. Thanks
Wrong section. re-post on the V9 super discussion section

Re: PowerVu Keys 58.0W 3720/V/30000

Posted: Sun Sep 06, 2020 4:26 pm
by locotrom26
Alguien tiene las llaves power vu para este tp

Re: PowerVu Keys 58.0W 3720/V/30000

Posted: Sun Sep 06, 2020 4:36 pm
by kaputito
Saludos...Igual que varios compañeros ocupo llaves PowerVu del 58.0W 3720/V/30000. Tengo mi V8 Super y mi antena con excelente señal en ese transponder pero no abro canales. Me las podrían compartir por favor. Desde San José Costa Rica

Re: PowerVu Keys 58.0W 3720/V/30000

Posted: Sun Sep 06, 2020 10:35 pm
by Isaiaspinedalemus
Help with tp 3720 v 30000 satellite 58

Re: PowerVu Keys 58.0W 3720/V/30000

Posted: Tue Sep 08, 2020 3:37 pm
by Zuli Moreno
Could you help me with the keys of the 3720 V transponder of the sat 58 W
Thanks for support

Re: PowerVu Keys 58.0W 3720/V/30000

Posted: Tue Sep 08, 2020 7:09 pm
by cpr43
As a safety measure and for the security of keys GTMedia has developed a program in which all keys are being added inside the firmware embedded and encrypted. Any time a key becomes expired a new keys will be added in the next released. If you are using some of the latest models you should update to the latest FW and channels with autoroll problems will come back with or without the softcam file. Old models will still require the entering of ECMs keys since they will not autoroll. Also, be aware that ECMs on some of them are changing frequently so think about of updating your equipments. After sometime iq180 will also stop sending ECMs.

Re: PowerVu Keys 58.0W 3720/V/30000

Posted: Wed Sep 09, 2020 1:41 am
by JacoTrein
I have a golden v8, no more updates for it, I need an updated softcam because some vanais no longer work please.

Re: PowerVu Keys 58.0W 3720/V/30000

Posted: Wed Sep 09, 2020 2:35 pm
by iq180
JacoTrein wrote:
Wed Sep 09, 2020 1:41 am
I have a golden v8, no more updates for it, I need an updated softcam because some vanais no longer work please.
A new softcam file will not fix your problem, the fact of the matter is, most of the EMM keys you have are still Valid, the problem is oscam is not working on some satellite providers after they made changes a few weeks ago, you can still add ECM keys to open the CHs but that don't last but about 2 days, auto roll is not going to work without an oscam update, the only way to update oscam is with new software.

BTW, on October 1, I will stop sending ECM by PM, I am only doing this to give people time to get there new receivers, you can still use your old receivers if you get the new V8-X you can extract the ECM keys from it and add them to your old receivers to open the CHs, all of this is out of my hands so no need for any bashing of me or anyone else at this site, I have done all I can, I have give you the facts as I see them, what you do with this info is up to you.

Re: PowerVu Keys 58.0W 3720/V/30000

Posted: Wed Sep 09, 2020 10:20 pm
by ead
iq180 wrote:
Wed Sep 09, 2020 2:35 pm

BTW, on October 1, I will stop sending ECM by PM, I am only doing this to give people time to get there new receivers, you can still use your old receivers if you get the new V8-X you can extract the ECM keys from it and add them to your old receivers to open the CHs, all of this is out of my hands so no need for any bashing of me or anyone else at this site, I have done all I can, I have give you the facts as I see them, what you do with this info is up to you.
Is the V8X the only receiver that will get the new EMM firmware?

Re: PowerVu Keys 58.0W 3720/V/30000

Posted: Fri Sep 11, 2020 3:00 pm
by mattwm86
Hola amigos. Tambien necesito las llaves, si alguien me podria enviar se los agradeceria muchisimo.

Re: PowerVu Keys 58.0W 3720/V/30000

Posted: Fri Sep 11, 2020 3:24 pm
by iq180
mattwm86 wrote:
Fri Sep 11, 2020 3:00 pm
Hola amigos. Tambien necesito las llaves, si alguien me podria enviar se los agradeceria muchisimo.
PM sent.

Re: PowerVu Keys 58.0W 3720/V/30000

Posted: Fri Sep 11, 2020 3:28 pm
by iq180
ead wrote:
Wed Sep 09, 2020 10:20 pm
iq180 wrote:
Wed Sep 09, 2020 2:35 pm

BTW, on October 1, I will stop sending ECM by PM, I am only doing this to give people time to get there new receivers, you can still use your old receivers if you get the new V8-X you can extract the ECM keys from it and add them to your old receivers to open the CHs, all of this is out of my hands so no need for any bashing of me or anyone else at this site, I have done all I can, I have give you the facts as I see them, what you do with this info is up to you.
Is the V8X the only receiver that will get the new EMM firmware?
No, it is the newest one and will get new updates before any of the older ones do.