PowerVu Keys 58.0W 3720/V/30000

Please discuss the softcam feature ,share the softcam key...

Moderators: admin, GTMedia Team

User avatar
iq180
网站管理员
Posts: 1234
Joined: Thu Aug 11, 2016 2:55 pm

Re: PowerVu Keys 58.0W 3720/V/30000

Post by iq180 »

ead wrote:
Wed Sep 09, 2020 10:20 pm
iq180 wrote:
Wed Sep 09, 2020 2:35 pm

BTW, on October 1, I will stop sending ECM by PM, I am only doing this to give people time to get there new receivers, you can still use your old receivers if you get the new V8-X you can extract the ECM keys from it and add them to your old receivers to open the CHs, all of this is out of my hands so no need for any bashing of me or anyone else at this site, I have done all I can, I have give you the facts as I see them, what you do with this info is up to you.
Is the V8X the only receiver that will get the new EMM firmware?
No, it is the newest one and will get new updates before any of the older ones do.

BertoG
Posts: 1
Joined: Fri Sep 04, 2020 7:24 pm

Amigos reciene registre en el sitio y no conozco muy bien cómo funciona si alguien fuera tan amble y me ayudara con el 3

Post by BertoG »

romo arturo wrote:
Thu Jan 30, 2020 4:00 am
leunam2017 wrote:
Sun Mar 11, 2018 8:06 pm
Gracias amigos. Ya me hicieron llegar las llaves. Excelente soporte.

Thanks friends. They already sent me the keys. Excellent support
Buenas noches, soy nuevo en esto, serian tan amables de enviarme las keys para el satelite 58.0 W, les quedare muy agradecido

Muchas gracias

egnislopez
Posts: 2
Joined: Wed Sep 16, 2020 10:09 pm

Re: PowerVu Keys 58.0W 3720/V/30000

Post by egnislopez »

Buenas soy nuevo Tardes Tengo El Mismo Problema Algunos Canales Del Intelsat 21 No Habren algun archivo para actualizar mi v8pro ya coloque la ultima actualizacion pero sigue igual

User avatar
iq180
网站管理员
Posts: 1234
Joined: Thu Aug 11, 2016 2:55 pm

Re: PowerVu Keys 58.0W 3720/V/30000

Post by iq180 »

egnislopez wrote:
Wed Sep 16, 2020 10:12 pm
Buenas soy nuevo Tardes Tengo El Mismo Problema Algunos Canales Del Intelsat 21 No Habren algun archivo para actualizar mi v8pro ya coloque la ultima actualizacion pero sigue igual
I sent you a PM, make good use of the time you have to get a new receiver, I will stop sending out new ECM keys at the end of September.

egnislopez
Posts: 2
Joined: Wed Sep 16, 2020 10:09 pm

Re: PowerVu Keys 58.0W 3720/V/30000

Post by egnislopez »

gracias ya reviso

buck63
Posts: 48
Joined: Tue Aug 27, 2019 3:52 pm

Re: PowerVu Keys 58.0W 3720/V/30000

Post by buck63 »

Can someone send new keys for this mux. Thanks in advance.

User avatar
iq180
网站管理员
Posts: 1234
Joined: Thu Aug 11, 2016 2:55 pm

Re: PowerVu Keys 58.0W 3720/V/30000

Post by iq180 »

buck63 wrote:
Mon Sep 21, 2020 10:34 am
Can someone send new keys for this mux. Thanks in advance.
You need to send me a PM when you need the ECM keys for this sat-TP.

Pako
Posts: 1
Joined: Thu Aug 01, 2019 5:03 am

Re: PowerVu Keys 58.0W 3720/V/30000

Post by Pako »

Buenos días amigo....y q receptores nos recomienda para poder seguir opteniendo la señal d los canales encriptados?? Saludos.

JEFREE
Posts: 1
Joined: Sat Sep 26, 2020 5:29 am

Re: PowerVu Keys 58.0W 3720/V/30000

Post by JEFREE »

Alguien que me pueda pasar las llaves PowerVu del 58.0W 3720/V/30000
se los agradecería infinitamente hay por favor

User avatar
iq180
网站管理员
Posts: 1234
Joined: Thu Aug 11, 2016 2:55 pm

Re: PowerVu Keys 58.0W 3720/V/30000

Post by iq180 »

Pako wrote:
Fri Sep 25, 2020 8:09 am
Buenos días amigo....y q receptores nos recomienda para poder seguir opteniendo la señal d los canales encriptados?? Saludos.
At this time I think the new V8-X is the best option.

otieno51@yahoo.com
Posts: 3
Joined: Sat Sep 05, 2020 1:08 pm

Re: PowerVu Keys 58.0W 3720/V/30000

Post by otieno51@yahoo.com »

I'm looking for power vu keys for V8 uhd.

Any help will be appreciated.

marcus
Posts: 16
Joined: Sat Aug 13, 2016 7:26 pm

Re: PowerVu Keys 58.0W 3720/V/30000

Post by marcus »

iq180 wrote:
Sat Sep 26, 2020 6:44 am
At this time I think the new V8-X is the best option.
I have been testing my v8x at this tp for at least one week i can see a micro glitch sometimes the image frezzes is that somethimg normal? this is not happening at some another tp i only have this satellite pointed to. Today just received my v7s2x it has the same problem too

User avatar
iq180
网站管理员
Posts: 1234
Joined: Thu Aug 11, 2016 2:55 pm

Re: PowerVu Keys 58.0W 3720/V/30000

Post by iq180 »

marcus wrote:
Wed Sep 30, 2020 5:02 am
iq180 wrote:
Sat Sep 26, 2020 6:44 am
At this time I think the new V8-X is the best option.
I have been testing my v8x at this tp for at least one week i can see a micro glitch sometimes the image frezzes is that somethimg normal? this is not happening at some another tp i only have this satellite pointed to. Today just received my v7s2x it has the same problem too
Try this, put a small fan under the receiver and see if the problem goes away, some CHs put more load on the receiver cpu and heat is a problem.

FKiernan
Posts: 1
Joined: Tue Aug 11, 2020 3:09 pm

Re: PowerVu Keys 58.0W 3720/V/30000

Post by FKiernan »

HI, may I get the keys for this satellite??

TIA
Regards

mikeCarr
Posts: 2
Joined: Fri Oct 09, 2020 11:52 pm

Re: PowerVu Keys 58.0W 3720/V/30000

Post by mikeCarr »

The keys are updated with the latest firmware of the equipment.

1234mccollin
Posts: 1
Joined: Thu Jul 02, 2020 5:59 pm

Re: PowerVu Keys 58.0W 3720/V/30000

Post by 1234mccollin »

Good night my friends my v9 don't give me 3720 H 30000 wouldn't greatly appreciate some keys help thanks

User avatar
iq180
网站管理员
Posts: 1234
Joined: Thu Aug 11, 2016 2:55 pm

Re: PowerVu Keys 58.0W 3720/V/30000

Post by iq180 »

1234mccollin wrote:
Sun Nov 01, 2020 11:21 pm
Good night my friends my v9 don't give me 3720 H 30000 wouldn't greatly appreciate some keys help thanks
All keys are now in the software, update the software.

fgouveia
Posts: 51
Joined: Mon Jan 16, 2017 7:49 pm

Re: PowerVu Keys 58.0W 3720/V/30000

Post by fgouveia »

Hi. Can someone send me the powervu keys for the 58.0W 3720 v 30000.
My Gtmedia V8 UHD is not working on those channels. Thank you.

Hola. Será que alguién puede enviarme las keys powervu para el 58.0W 3720 v 30000.
Esos canales no están funcionando en ni Gtmedia V8 UDH. Gracias

User avatar
cpr43
网站管理员
Posts: 5053
Joined: Thu Aug 11, 2016 1:41 pm

Re: PowerVu Keys 58.0W 3720/V/30000

Post by cpr43 »

fgouveia wrote:
Wed Nov 11, 2020 7:13 pm
Hi. Can someone send me the powervu keys for the 58.0W 3720 v 30000.
My Gtmedia V8 UHD is not working on those channels. Thank you.

Hola. Será que alguién puede enviarme las keys powervu para el 58.0W 3720 v 30000.
Esos canales no están funcionando en ni Gtmedia V8 UDH. Gracias
Si tu unidad esta actualizada con el ultimo bin 11/10/2020 deberia hacer autoroll, No instale el archivo Softcam.
Follow Forum Rules here: https://www.freesat.cn/forum/viewtopic.php?f=47&t=16325
GTMedia V8X/UHD4K/Pro2-Nova- Dreambox DM800HDse-Scanning the arc from 43w to 133w

fgouveia
Posts: 51
Joined: Mon Jan 16, 2017 7:49 pm

Re: PowerVu Keys 58.0W 3720/V/30000

Post by fgouveia »

Olá, agradecido por la respuesta. Reseteé el equipo, reinstalé el último firmware y dejé conectado unos 20 minutos. Nada cambió.

User avatar
iq180
网站管理员
Posts: 1234
Joined: Thu Aug 11, 2016 2:55 pm

Re: PowerVu Keys 58.0W 3720/V/30000

Post by iq180 »

fgouveia wrote:
Wed Nov 11, 2020 8:00 pm
Olá, agradecido por la respuesta. Reseteé el equipo, reinstalé el último firmware y dejé conectado unos 20 minutos. Nada cambió.
It can take up to 1 Hr for auto roll on this TP.

User avatar
alex.c
网站管理员
Posts: 1197
Joined: Fri Jun 05, 2020 8:01 am

Re: PowerVu Keys 58.0W 3720/V/30000

Post by alex.c »

iq180 wrote:
Wed Nov 11, 2020 10:00 pm
fgouveia wrote:
Wed Nov 11, 2020 8:00 pm
Olá, agradecido por la respuesta. Reseteé el equipo, reinstalé el último firmware y dejé conectado unos 20 minutos. Nada cambió.
It can take up to 1 Hr for auto roll on this TP.
Maybe we need more emm keys to reduce the roll time?

User avatar
iq180
网站管理员
Posts: 1234
Joined: Thu Aug 11, 2016 2:55 pm

Re: PowerVu Keys 58.0W 3720/V/30000

Post by iq180 »

alex.c wrote:
Thu Nov 12, 2020 1:50 am
iq180 wrote:
Wed Nov 11, 2020 10:00 pm
fgouveia wrote:
Wed Nov 11, 2020 8:00 pm
Olá, agradecido por la respuesta. Reseteé el equipo, reinstalé el último firmware y dejé conectado unos 20 minutos. Nada cambió.
It can take up to 1 Hr for auto roll on this TP.
Maybe we need more emm keys to reduce the roll time?
We can try it, I will send you some keys.

Javier rivadulla
Posts: 2
Joined: Wed Nov 11, 2020 1:28 pm

Re: PowerVu Keys 58.0W 3720/V/30000

Post by Javier rivadulla »

Hola bn dia amigos alguno me podria facilitar las key del 58w ya q actualize mi equipo y no abren ahora es un v8x gracias

User avatar
juan_vale
网站管理员
Posts: 843
Joined: Wed Nov 29, 2017 5:50 am
Location: B.C.S. Mexico 24N 110W

Re: PowerVu Keys 58.0W 3720/V/30000

Post by juan_vale »

Javier rivadulla wrote:
Sat Nov 14, 2020 1:46 pm
Hola bn dia amigos alguno me podria facilitar las key del 58w ya q actualize mi equipo y no abren ahora es un v8x gracias
El V8x abrirá ese transpondedor (3720V30000), a veces tarda 30 minutos o más, así que colócalo en un canal y ve a tomar un café ... Tengo un V8x y si funciona.
No live links (Rule #18) highlight the URL and use the Code tag option "</>"
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)

Locked