It happened to me too and I finally realized that this happens when you export the file and then keep editing it to export it again when the job is done, this causes the channels to doubled up. After exporting you should close the program completely and then reopen it and load the latest exported file to continue editing it, in this way you will have only one copy of the stored channels on the new export or export to a new file because you are not saving but exporting and this means that the data you export is "added" to the existing data in that file if you don't create a brand new one.
Maybe Ihcsas can confirm this.
I will check this, thx for report.
At the moment real life comes first, I am currently getting a new car and have to prepare everything for the holyday, but I try my best to release a new version this week.
Hello, thank you for you effort on this CHeditor software. im writting from Chile, here we use ISDB-Tb AS TDT standart im using TDT and DVB-s2x tuners. im trying to use your editor but i cant import my DVB data in to. It show me " ERROR (1,1).0
Im using a GTMEDIA Combo device.
i've some question...before that i say this is great tool but does it not effect by subtitle problem?? Before that i have use similiar tools but when successed edit..and import to my box (GTC)..subtitle is not show..so i must scan again to get subtitle...so how about this tool?? does it get same effect like this or not??
It happened to me too and I finally realized that this happens when you export the file and then keep editing it to export it again when the job is done, this causes the channels to doubled up. After exporting you should close the program completely and then reopen it and load the latest exported file to continue editing it, in this way you will have only one copy of the stored channels on the new export or export to a new file because you are not saving but exporting and this means that the data you export is "added" to the existing data in that file if you don't create a brand new one.
Maybe Ihcsas can confirm this.
Probe eso como dices, y a mi me siguen duplicando algunos canales.
Probe eso como dices, y a mi me siguen duplicando algunos canales.
The programmer @Ihcsas said he was going to check this out but then went in a vacation and we haven't seen him back ever since. Lets hope he remembers it, it's a useful tool if it works properly
La verdad que si, estamos agradecidos que trabaje en el programa, porque sino seria un caos ordenar los canales
Consulta , han podido hacer un respaldo o exportar la lista de canales a otro gtcombo? En casa tengo dos decos, pero cuando hago respaldo DVB y lo quiero exportar al otro deco solo me arroja error.
UPDATE: 2021-07-24
- fix v30 export
- fix radio export
- Add Radio Tab with all functions
UPDATE: 2021-07-23
- Radio with SID=0 added
- v30 added
- GUI changed a little bit (think it is better now)
- fixed sat->transponder->channel dependence
Info:
Please give me feedback, in case of import problems please attach the XML file, otherwise have fun with the tool!
Menu:
"File" import(-> Step 1) and export(-> Export XML ends up in the .exe folder)
"Refresh" updates the program
Functions:
Delete a channel, select channel and click "Del-Key" -> MessageBox is asking
Change ChannelNumber, you can enter a channel number in the field, if the channel number is already occupied it will be exchanged
You can customize almost everything in the datagrid (table display)
Select channel, you can adjust transponder, set favorites, adjust video, audio and PCR pids in Program Settings
"Renew IDs" again starting from 1 in ascending order
"Fix channel numbers", duplicate numbers become unique
Search Name, searching in Program List
Add Program - you can use a program to fill everything automatically, adjust the data and add it as a new channel, an open channel number will be selected automatically. Please also fill the audio list
You can customize the favorites list, please do not change the group index, you can customize the names of the favorites
Add Program automatic, you can search for a program name, this name will be determined by SatIndex, you will get several suggestions, here you can choose one and add it to your channel list. Transponder will be added automatically, if the satellite does not exist, a message will be displayed. You may have to adjust the audio and video formats, as they are currently not read automatically (V-Format: h264, A-Format: MPEG).
Duplicate audio PIDs are deleted during export
Transponders without channels will be removed (Empty transponders)
Todo:
Add v30 XML FIXED v1.2.0.0
Fix some bugs on start(if no file is imported) FIXED v1.1.0.0
Add DVB-T, DVB-C support FIXED -> next release
Radio Tab is on work FIXED v1.3.1.0
Satellite Tab is on work
Transponder Tab is on work, but you can already add transponders and change data
Fix/Hide "xxx" in ChannelName
Fix Tab-Key Index
Load new list support FIXED -> next release
Rename brand FIXED -> next release
Add favorite-list included channel numbers
Input Control (only numbers)
Add program, change sat -> change transponder
Added Satellite Position
GitHub Release
Hello Ihcsas, we have been without news for a long time.
Could you tell me why the program doubles the channels?
And another thing, could not the 3 xxx be eliminated from the name of the channels?
La verdad que si, estamos agradecidos que trabaje en el programa, porque sino seria un caos ordenar los canales
Consulta , han podido hacer un respaldo o exportar la lista de canales a otro gtcombo? En casa tengo dos decos, pero cuando hago respaldo DVB y lo quiero exportar al otro deco solo me arroja error.
¿ Los 2 decos son el mismo modelo y tienen el mismo firmware ?.
La verdad que si, estamos agradecidos que trabaje en el programa, porque sino seria un caos ordenar los canales
Consulta , han podido hacer un respaldo o exportar la lista de canales a otro gtcombo? En casa tengo dos decos, pero cuando hago respaldo DVB y lo quiero exportar al otro deco solo me arroja error.
¿ Los 2 decos son el mismo modelo y tienen el mismo firmware ?.
UPDATE: 2021-07-24
- fix v30 export
- fix radio export
- Add Radio Tab with all functions
UPDATE: 2021-07-23
- Radio with SID=0 added
- v30 added
- GUI changed a little bit (think it is better now)
- fixed sat->transponder->channel dependence
Info:
Please give me feedback, in case of import problems please attach the XML file, otherwise have fun with the tool!
Menu:
"File" import(-> Step 1) and export(-> Export XML ends up in the .exe folder)
"Refresh" updates the program
Functions:
Delete a channel, select channel and click "Del-Key" -> MessageBox is asking
Change ChannelNumber, you can enter a channel number in the field, if the channel number is already occupied it will be exchanged
You can customize almost everything in the datagrid (table display)
Select channel, you can adjust transponder, set favorites, adjust video, audio and PCR pids in Program Settings
"Renew IDs" again starting from 1 in ascending order
"Fix channel numbers", duplicate numbers become unique
Search Name, searching in Program List
Add Program - you can use a program to fill everything automatically, adjust the data and add it as a new channel, an open channel number will be selected automatically. Please also fill the audio list
You can customize the favorites list, please do not change the group index, you can customize the names of the favorites
Add Program automatic, you can search for a program name, this name will be determined by SatIndex, you will get several suggestions, here you can choose one and add it to your channel list. Transponder will be added automatically, if the satellite does not exist, a message will be displayed. You may have to adjust the audio and video formats, as they are currently not read automatically (V-Format: h264, A-Format: MPEG).
Duplicate audio PIDs are deleted during export
Transponders without channels will be removed (Empty transponders)
Todo:
Add v30 XML FIXED v1.2.0.0
Fix some bugs on start(if no file is imported) FIXED v1.1.0.0
Add DVB-T, DVB-C support FIXED -> next release
Radio Tab is on work FIXED v1.3.1.0
Satellite Tab is on work
Transponder Tab is on work, but you can already add transponders and change data
Fix/Hide "xxx" in ChannelName
Fix Tab-Key Index
Load new list support FIXED -> next release
Rename brand FIXED -> next release
Add favorite-list included channel numbers
Input Control (only numbers)
Add program, change sat -> change transponder
Added Satellite Position
GitHub Release
Buenas tardes a todos.
No se , pero creo que Ihcsas ha abandonado este proyecto.
La verdad que si, estamos agradecidos que trabaje en el programa, porque sino seria un caos ordenar los canales
Consulta , han podido hacer un respaldo o exportar la lista de canales a otro gtcombo? En casa tengo dos decos, pero cuando hago respaldo DVB y lo quiero exportar al otro deco solo me arroja error.
Si, a mi me funciona en los decos GTC, tengo 1 lista de canales para los 2.
Dear administrators: I wanted to point out that with the latest firmware for the GTCombob android 9 it is no longer possible to load the channel list sorted via usb. Please can you update the Channel Editor?
Thank you in advance
Release: GTMediaGTC-Editor_v2.0.0.31.zip
Version: v31
Only DVB-S/S2 at the moment
I can't support the old versions anymore unfortunately, some code has been changed and the link between Satellite-Transponder-Channel-Video-Sound has been improved.
Currently only Satellite is supported, I need a XML v31 export for DVB-T and DVB-C.
Release: GTMediaGTC-Editor_v2.0.0.31.zip
Version: v31
Only DVB-S/S2 at the moment
I can't support the old versions anymore unfortunately, some code has been changed and the link between Satellite-Transponder-Channel-Video-Sound has been improved.
Currently only Satellite is supported, I need a XML v31 export for DVB-T and DVB-C.
Release: GTMediaGTC-Editor_v2.0.0.31.zip
Version: v31
Only DVB-S/S2 at the moment
I can't support the old versions anymore unfortunately, some code has been changed and the link between Satellite-Transponder-Channel-Video-Sound has been improved.
Currently only Satellite is supported, I need a XML v31 export for DVB-T and DVB-C.
Please send feedback
Thanks again for the editor.
Will test soon.
Attached a copy of my user DB that has DVB-T
dvbchannel_v31_2022_04_03_07_14_26.zip
Owen
I will have a look at the file tomorrow and try to bring more updates as soon as possible.