GT Combo extract rolled key data

GTMEDIA_GTX COMBO/GTX Twin/GTCOMBO /GTC /GTS /GTS-PRO /GTT2

Moderators: admin, nzl229, GTMedia Team

Post Reply
kiwicuzzie
Posts: 3
Joined: Sat Jun 12, 2021 2:49 am

GT Combo extract rolled key data

Post by kiwicuzzie »

Has anybody had success in extracting a rolled key from a GT Combo ??
This is the process I have followed:
Go to DVB Section / Menu / Installation / Then 6666 / On the next screen go to CS Protocol / OK / Go to OSCAM Configuration / Green button to export to USB

But when opening the USB files in any/all of wordpad notepad MS Word and Neat Office they all show up as blank files.
I have used multiple reformatted USBs.

I have no problems doing this on V8x and V9 Prime.

Am I missing something ??? TIA

Cheers & beers
Kiwicuzzie

STRETCH
Posts: 3641
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: GT Combo extract rolled key data

Post by STRETCH »

I am having the same issue, to add to the issue, i am not able to add the softcam, that i had on usb, (it is like that the receiver does not see the USB,) which i had before the last update.
Have tried putting in the keys for A F N with the remote, and still they do not decode with this receiver, like it does with V8X/V7PRO/V7S2X.
If they made this receiver a stand alone, with the 4.2.2 and without all the addon's or bring it into line, like the V8X/V7PRO/V8UHD.
Which will make it a good receiver, even for feed hunters.

Den

User avatar
cpr43
网站管理员
Posts: 7046
Joined: Thu Aug 11, 2016 1:41 pm

Re: GT Combo extract rolled key data

Post by cpr43 »

Hello

Remember that the the GTCombo works using Oscam. The best option to add/ dump or modify keys is using the FTP option.

http://192.168.0.24:8081/files.html?file=SoftCam.Key

You need to change 192.168.0.24 with your actual box i.p. address

kiwicuzzie
Posts: 3
Joined: Sat Jun 12, 2021 2:49 am

Re: GT Combo extract rolled key data

Post by kiwicuzzie »

THANK YOU cpr43 !!! Brilliant advice. SUCCESS with your method.
Attachments
298096669_2291165211040231_6892788538583095863_n.jpg
298096669_2291165211040231_6892788538583095863_n.jpg (39.79 KiB) Viewed 1682 times
298096669_2291165211040231_6892788538583095863_n.jpg
298096669_2291165211040231_6892788538583095863_n.jpg (39.79 KiB) Viewed 1682 times

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GT Combo extract rolled key data

Post by Feralkiwi »

Yes I got it to work after I got the correct IP address in.

I also got it to work on the browser on the GT Combo.
There you need to type the numbers etc into the address line as the auto fill takes it to the search function.
After you get it typed in and working you can save it to bookmarks and get to it again from there.

It would be very good to have the EPG folder open in this oscam page as well so users can delete one channel files or add info.
I will ask GT Media if this can be done


I have not tested, but I expect this is where any "Screen saver" picture is saved in the 'User File" section.
Screen saver is found by pressing and hold the power button and then select screen shot.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

josega
Posts: 28
Joined: Fri Jan 29, 2021 2:48 pm

Re: GT Combo extract rolled key data

Post by josega »

hola, como se pone con usb o se puede hacer manual.Gracias

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GT Combo extract rolled key data

Post by Feralkiwi »

josega wrote:
Tue Dec 27, 2022 9:45 am
hola, como se pone con usb o se puede hacer manual.Gracias
If you open the internet browser on the box or your PC and enter this in the address line.

Code: Select all

192.168.x.xxx:8081
the x.xxx is your IP address for the GT Combo in your internal net, look under info to see it.
My address is

Code: Select all

192.168.1.109:8081
Once there click on files and then BISS to see the biss codes found or powervu to see those.

You will end with this line on the browser address line, note again you need to make the 1.109 match YOUR IP address, not mine.

Code: Select all

http://192.168.1.109:8081/files.html?file=autobiss.Key
You can then copy or add codes and also add comments.
Anything after the ; is comment. The autoBiss adds a frequency and longitude and SID as it enters the codes

Owen

Sample from mine: codes changed to comply with forum rule: RULE #17--KEYS---No Keys in public will be allowed.
The stuff in blue I added for my own notes.
F 0000 00 1234567890ABCDEF;1005:03861:0001
F 0000 00 1234567890ABCDEF;1520:12668:0001:whateveryouwant28dec
F 0000 00 3683742DF29E8111;1005:03895:0001
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

josega
Posts: 28
Joined: Fri Jan 29, 2021 2:48 pm

Re: GT Combo extract rolled key data

Post by josega »

Hola, muchas gracias haber si puedo hacerlo, soy bastante torpe con estas cosas.Saludos

Gary196557
Posts: 4
Joined: Mon Jan 09, 2023 3:40 pm

Re: GT Combo extract rolled key data

Post by Gary196557 »

STRETCH wrote:
Mon Aug 08, 2022 1:45 pm
I am having the same issue, to add to the issue, i am not able to add the softcam, that i had on usb, (it is like that the receiver does not see the USB,) which i had before the last update.
Have tried putting in the keys for A F N with the remote, and still they do not decode with this receiver, like it does with V8X/V7PRO/V7S2X.
If they made this receiver a stand alone, with the 4.2.2 and without all the addon's or bring it into line, like the V8X/V7PRO/V8UHD.
Which will make it a good receiver, even for feed hunters.

Den
I have a v9. Prime I am not sure how to put oscam? Into my box thanks Gary

User avatar
CAJE
网站管理员
Posts: 2262
Joined: Sun Dec 06, 2020 8:00 pm

Re: GT Combo extract rolled key data

Post by CAJE »

You can't put it, you could only make small modifications if the options are in the firmware

Gary196557
Posts: 4
Joined: Mon Jan 09, 2023 3:40 pm

Re: GT Combo extract rolled key data

Post by Gary196557 »

I am not sure how do I need to use a USB? I am new to all this thanks Gary

Gary196557
Posts: 4
Joined: Mon Jan 09, 2023 3:40 pm

Re: GT Combo extract rolled key data

Post by Gary196557 »

How can I put icam patch oscam in my v9. Prime?

User avatar
cpr43
网站管理员
Posts: 7046
Joined: Thu Aug 11, 2016 1:41 pm

Re: GT Combo extract rolled key data

Post by cpr43 »

Gary196557 wrote:
Sat Jan 28, 2023 11:59 am
How can I put icam patch oscam in my v9. Prime?
No way to do it. Close source wont allow to update android Oscam version

Gary196557
Posts: 4
Joined: Mon Jan 09, 2023 3:40 pm

Re: GT Combo extract rolled key data

Post by Gary196557 »

Thanks for that so what received can then?

Post Reply

Return to “GTMEDIA GT SERIES (Android DVB & IPTV BOX)”