113W Blind Scan

GTC - DVBS/S2/T/T2/ISDB-T/Cable(J83-A/C/B)
GTS - DVBS/S2
GTS PRO - DVBS/S2
GTT - DVBT/T2/Cable

Moderators: admin, nzl229, GTMedia Team

Post Reply
Hank4
Posts: 80
Joined: Sat Apr 14, 2018 11:09 pm

113W Blind Scan

Post by Hank4 » Sun Jun 09, 2019 12:59 pm

I updated my box to GTC_OTA_C20.A6.2.46_20190604 and did a factory reset. Since I use a DiSEqC 1.0 switch, I set it to port 2 where my C-Band signal is connected. I scanned 113W several times before I was able to acquire any channels. My final scan was Scan Mode–Blind, Cryted-All, Accurate Scan-ON. I got FTA channels only and did not get any of the encrypted channels that I normally get on my Super 8 and Nova. I’m interested in getting the PowerVu channels on transponder 4140H such as Canal Once and Canal 22. In addition, I would like update my softcam to receive these channels. Your help will be appreciated.
Thanks, Hank

User avatar
cpr43
网站管理员
Posts: 2743
Joined: Thu Aug 11, 2016 1:41 pm

Re: 113W Blind Scan

Post by cpr43 » Sun Jun 09, 2019 1:46 pm

Scan Mode: BlindScan
Crypted: All
Service Type: All
Accurate Scan (Off/On) as you wish
Yes

Try also, to choose Diseqc 1.0 port 1 even if you are connected to port 2 and test
Use Search Before Posting- Post in the Right Section- Do Not Spam the Board- Do Not make Hidden Links Public- Respect other Members- ALWAYS remember... Follow Forum Rules

User avatar
msilver511
Posts: 42
Joined: Sat Jul 22, 2017 2:46 am
Location: Los Angeles

Re: 113W Blind Scan

Post by msilver511 » Wed Jun 12, 2019 6:04 am

PM sent Good Luck!

Hank4
Posts: 80
Joined: Sat Apr 14, 2018 11:09 pm

Re: 113W Blind Scan

Post by Hank4 » Wed Jun 12, 2019 12:21 pm

msilver511 wrote:
Wed Jun 12, 2019 6:04 am
PM sent Good Luck!
Thank you very much for sharing.
Hank :D :D

Hank4
Posts: 80
Joined: Sat Apr 14, 2018 11:09 pm

Re: 113W Blind Scan

Post by Hank4 » Mon Jun 24, 2019 1:13 pm

cpr43 wrote:
Sun Jun 09, 2019 1:46 pm
Scan Mode: BlindScan
Crypted: All
Service Type: All
Accurate Scan (Off/On) as you wish
Yes

Try also, to choose Diseqc 1.0 port 1 even if you are connected to port 2 and test
I’ve scanned 113W numerous times using all available options and I’m still not getting any of the encrypted channels. Is anyone out there getting any of these channels? Will appreciate your feedback.
Thanks, Hank

Post Reply