GTC Firmware Upgrade Statement!

GTMEDIA_GTX COMBO/GTX Twin/GTCOMBO /GTC /GTS /GTS-PRO /GTT2

Moderators: admin, nzl229, GTMedia Team

Usu
Posts: 24
Joined: Tue Dec 17, 2019 10:01 am
Location: Romania

Re: GTC Firmware Upgrade Statement!

Post by Usu »

Watch out for the update.
.zip means functional image update to a receiver.
.img means replacement of a malfunctioning image on a receiver that is no longer working or is locked.
For .zip use usb.
For .img use dad-dad usb cable

Code: Select all

https://youtu.be/wxgjoIoU868

jotalo
Posts: 1
Joined: Sat Aug 15, 2020 11:32 pm

Re: GTC Firmware Upgrade Statement!

Post by jotalo »

Hi, my box stopped working..
Please send me the firmware:
jotalo@gmail.com
SN: GC2A19008605

zeho
Posts: 6
Joined: Sat Sep 21, 2019 6:20 pm

Re: GTC Firmware Upgrade Statement!

Post by zeho »

Please send me last firmware update
GTC2161804004119
zeho54@gmail.com
Thanks
Attachments
IMG_20200815_100850.jpg
IMG_20200815_100850.jpg (1.29 MiB) Viewed 6239 times

pepcad
Posts: 1
Joined: Sat Jul 04, 2020 9:09 am

Re: GTC Firmware Upgrade Statement!

Post by pepcad »

Please send the firmware, the device writes no signal to the DVD-S, but the
signal is OK, GTC 2161804003706, pepcadoubek@gmail.com

ffcosta88
Posts: 2
Joined: Fri Aug 14, 2020 3:38 am

Re: GTC Firmware Upgrade Statement!

Post by ffcosta88 »

My wife hung up before finishing the update, now it's just on the startup screen. I need the firmware to fix it.
SN: GC2A19008620
fabriciocosta.fc@hotmail.com

papuga1
Posts: 7
Joined: Sun Jun 09, 2019 7:56 am

Re: GTC Firmware Upgrade Statement!

Post by papuga1 »

ffcosta88 wrote:
Wed Aug 19, 2020 1:26 am
My wife hung up before finishing the update, now it's just on the startup screen. I need the firmware to fix it.
SN: GC2A19008620
fabriciocosta.fc@hotmail.com
I have the same as you. I also need the GC2A19007837 firmware. I need to check method 2 on USB.

patriot6@o2.pl

Gift Bryson
Posts: 5
Joined: Tue Aug 25, 2020 7:07 am

Re: GTC Firmware Upgrade Statement!

Post by Gift Bryson »

hello i need gt media gtc firmware
sn: GC2A19009946
email: kilianmtotowamungu@gmail.com

marcomotas
Posts: 2
Joined: Sun May 17, 2020 1:50 pm

Re: GTC Firmware Upgrade Statement!

Post by marcomotas »

HI. HD channels are not working in Brazil.
Device GC2A19008611. There is a fix to this? For cable DVB-C.

Thanks

Gift Bryson
Posts: 5
Joined: Tue Aug 25, 2020 7:07 am

Re: GTC Firmware Upgrade Statement!

Post by Gift Bryson »

Please firmware.
My SN:GC2A19009946

Pedroycia
Posts: 2
Joined: Fri Sep 25, 2020 2:45 pm

Re: GTC Firmware Upgrade Statement!

Post by Pedroycia »

Hola. Mi GTC se ha bloqueado. Necesito el firmware original.
Sn GC2A19013434

Email: pedro_ruiz_alonso@hotmail.com

Gracias

Pere
Posts: 14
Joined: Tue Nov 27, 2018 4:51 pm

Re: GTC Firmware Upgrade Statement!

Post by Pere »

Pedroycia wrote:
Fri Sep 25, 2020 2:50 pm
Hola. Mi GTC se ha bloqueado. Necesito el firmware original.
Sn GC2A19013434

Email: pedro_ruiz_alonso@hotmail.com

Gracias
hola a mi no me funcionan las canales hd e reiniciado de fabrica pero continua igual

Guence
Posts: 12
Joined: Thu May 24, 2018 9:54 am

Re: GTC Firmware Upgrade Statement!

Post by Guence »

Please help me.
IMG_20200929_152515.jpg
IMG_20200929_152515.jpg (568.81 KiB) Viewed 5532 times
IMG_20200929_152521.jpg
IMG_20200929_152521.jpg (1.29 MiB) Viewed 5532 times
Thansk!

User avatar
cpr43
网站管理员
Posts: 7046
Joined: Thu Aug 11, 2016 1:41 pm

Re: GTC Firmware Upgrade Statement!

Post by cpr43 »

Unplug from power, wait, plug back keep pressing MENU many times on your remote control

Guence
Posts: 12
Joined: Thu May 24, 2018 9:54 am

Re: GTC Firmware Upgrade Statement!

Post by Guence »

Hi cpr43,
I have done many time what you says but nothing. Allways the same thing. What can i do now ?

Thansk!

vikymediana
Posts: 1
Joined: Wed Dec 02, 2020 6:30 pm

Re: GTC Firmware Upgrade Statement!

Post by vikymediana »

Requesting firmware
SN: GS2819005735
victoria_mediana@hotmail.com

Wanyonyi
Posts: 34
Joined: Fri Nov 03, 2017 9:53 am
Location: kenya

Re: GTC Firmware Upgrade

Post by Wanyonyi »

Hi i the need latest software for my Gtc
Sn: GC2A20016855,Email:kapchangaf@gmail.com,
Currently it cannot open any powervu chnls from apstar 76e to intelsat 68.5e,Thanks inadvance.

BreinRiy
Posts: 2
Joined: Mon Oct 24, 2022 5:22 pm

Re: GTC Firmware Upgrade Statement!

Post by BreinRiy »

Горит зеленая лампочка, на пульт не реагирует. Что делать?
GS2A19011830
gsv05@inbox.ru
Пожалуйста пришлите инструкцию по прошивке

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GTC Firmware Upgrade Statement!

Post by Feralkiwi »

BreinRiy wrote:
Mon Oct 24, 2022 5:35 pm
Горит зеленая лампочка, на пульт не реагирует. Что делать?
GS2A19011830
gsv05@inbox.ru
Пожалуйста пришлите инструкцию по прошивке
There are forced recovery instructions here.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

BreinRiy
Posts: 2
Joined: Mon Oct 24, 2022 5:22 pm

Re: GTC Firmware Upgrade Statement!

Post by BreinRiy »

BreinRiy wrote:
Mon Oct 24, 2022 5:35 pm
Горит зеленая лампочка, на пульт не реагирует. Что делать?
GS2A19011830
gsv05@inbox.ru
Пожалуйста пришлите инструкцию по прошивке
Решил проблему. Все оказалось просто - сгорел блок питания!
Прошивку тоже получилось обновить на 51, а при запуске бокса еще и пришло обновление на 53.

Batzen1981
Posts: 34
Joined: Fri Oct 15, 2021 4:34 am

Re: GTC Firmware Upgrade Statement!

Post by Batzen1981 »

HI can i get the zip file to fix boot picture

i lost it and need it once more

please email it to me at rb195707@gmail.com

thank you

GC2X3121003658

tech7a
Posts: 1
Joined: Wed Nov 16, 2022 7:48 am

Re: GTC Firmware Upgrade Statement!

Post by tech7a »

Requesting firmware
SN: GC2X3122009901
techsevena@gmail.com

User avatar
cpr43
网站管理员
Posts: 7046
Joined: Thu Aug 11, 2016 1:41 pm

Re: GTC Firmware Upgrade Statement!

Post by cpr43 »

GC is usually 6.3 GTC option. You can download either the update or image file from here:

viewtopic.php?f=56&t=12827

Remember to use for the update version file as is .zip without decompress the file

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GTC Firmware Upgrade Statement!

Post by Feralkiwi »

tech7a wrote:
Fri Nov 18, 2022 6:57 pm
Requesting firmware
SN: GC2X3122009901
techsevena@gmail.com
Post of pic for you regard GT Combo Reset button.
Top right there is a square with two circles in it.
That is the reset button location.

A close zoom shows that the track for the active pins are the bottom two as shown in my picture.
The other two are ground.


If your unit also does not have a button installed there, try doing the reset by using a metal pin connected to ground, (the outer of the LNB connection will do) and touch one of the lower two pins while powering on for software reload.
Take care not to touch that ground pin on anything else.

The other way is to remove the board from the case and solder on a reset button as shown in this post or connect one upper connection to one lower connection of this reset switch location using metal tweezers or something else that is small and easily managed on this board.

Off subject:
Note the bent USB connection above the reset location.
This is due to the solder of the ground pin being dry from manufacture. See the second pic.
Edited: I soldered the ground pin, but some of the data pins are loose. I will buy a 4 pin USB header cable and connect that to the fourth USB connector inside the unit (beside the IR sensor bottom left of pic 2) and use it for my wireless mouse dongle.
Take care if you have something like this as the data and power pins are very small surface mount and will break off.
This may be why some users find their HDMI connection fails. Looking at my HDMI connection I see only a little solder on the ground pins of the HDMI cover. It is still solid, while the USB is loose.
I think these larger components are hand loaded and soldered.
Large metal covers take a lot of heat / time to solder, as does any solder connection to the ground on these multi layer circuit boards. The copper ground track (the full surface of these boards) takes the heat away quickly.
Take care people with these connections.


Owen
.
.
IMG_6978.JPG
IMG_6978.JPG (1.24 MiB) Viewed 1341 times
IMG_6979.JPG
IMG_6979.JPG (1.11 MiB) Viewed 1341 times
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

Post Reply

Return to “GTMEDIA GT SERIES (Android DVB & IPTV BOX)”