GTC recording does not start on stand-by

GTMEDIA_GTX COMBO/GTX Twin/GTCOMBO /GTC /GTS /GTS-PRO /GTT2

Moderators: admin, nzl229, GTMedia Team

Post Reply
sertur1
Posts: 6
Joined: Mon Apr 15, 2019 4:17 pm

GTC recording does not start on stand-by

Post by sertur1 »

when a recording has been programmed and put into stand-by mode it does not start the recording.
it only works when it is on the device

Captain Ron
Posts: 548
Joined: Thu Nov 29, 2018 12:50 am

Re: GTC recording does not start on stand-by

Post by Captain Ron »

You might try this.... You cannot use the wake up time as the start recording time as it will not record on Standby. You need to set the box to wake up at least a few minutes (3-5 minutes) for bootup, etc. before the set recording time. Same for shut down, you need to set the end recording time at a time before the time you set for sleep time if you are doing that also.

Good Luck and Beers to you ! :D

Hase57
Posts: 15
Joined: Tue Apr 16, 2019 9:06 am

Re: GTC recording does not start on stand-by

Post by Hase57 »

Hi i have the same Problem, have tested it as you write it, but its not starting...
Couldnt record anything via PVR and Timer..

sertur1
Posts: 6
Joined: Mon Apr 15, 2019 4:17 pm

Re: GTC recording does not start on stand-by

Post by sertur1 »

hi Captain Ron, what you comment does not work on stand-by does not start the scheduled recording. it only starts if it is on
any other suggestions? Thank you

Hase57
Posts: 15
Joined: Tue Apr 16, 2019 9:06 am

Re: GTC recording does not start on stand-by

Post by Hase57 »

Can nobody help with this prob?
Any software that helps??

Hase57
Posts: 15
Joined: Tue Apr 16, 2019 9:06 am

Re: GTC recording does not start on stand-by

Post by Hase57 »

Too Bad no help from the softwareprogrammers??

User avatar
nzl229
Posts: 126
Joined: Mon Aug 08, 2016 2:54 am
Contact:

Re: GTC recording does not start on stand-by

Post by nzl229 »

sertur1 wrote:
Mon Apr 15, 2019 4:47 pm
when a recording has been programmed and put into stand-by mode it does not start the recording.
it only works when it is on the device
Access to a booking(recording or watching) from standby is currently not supported, and the GTMedia team will consider adding this feature.

Hase57
Posts: 15
Joined: Tue Apr 16, 2019 9:06 am

Re: GTC recording does not start on stand-by

Post by Hase57 »

That would be great, what when we bring the box not in stand by, we bring it in out modus..?

Hase57
Posts: 15
Joined: Tue Apr 16, 2019 9:06 am

Re: GTC recording does not start on stand-by

Post by Hase57 »

Did you find the Problem and a Solution??

Hase57
Posts: 15
Joined: Tue Apr 16, 2019 9:06 am

Re: GTC recording does not start on stand-by

Post by Hase57 »

No Update no help for this Problem??

User avatar
nzl229
Posts: 126
Joined: Mon Aug 08, 2016 2:54 am
Contact:

Re: GTC recording does not start on stand-by

Post by nzl229 »

The new upgrade will be released this month, but still need to wait

Hase57
Posts: 15
Joined: Tue Apr 16, 2019 9:06 am

Re: GTC recording does not start on stand-by

Post by Hase57 »

Ok, nice to hear!

Post Reply

Return to “GTMEDIA GT SERIES (Android DVB & IPTV BOX)”