GTMEDIA Forum

Hi all i've started to build an application for channel editing for GTC its not complete yet but i think will finish in two weeks
for now what i complete can look on first version its a bit laggy but i want to know if this work at al l;)

whats working:
deleting satelites
moving channels up\down
removing channels
reasign channels to current set
saving xml list

little explanation : when you editing channels move up\down as you want after finishing please hit reasign button it will assigne new channel number to program as is in gridview. if edited list will work on GTC this will be 100% satisied for me here's link to download. please dont remove xsd file its xml schema for checking if you xml is ok

Excellent idea. Good Job!

Excelente aporte, deseando probarlo.

Excellent contribution, wishing to try it.

Good working and i wish you good ending

I wish you all successful

Keep in your mind users needs simple application to use

Good luck

Grande perro!! No eres el primero, aparte del editor de listas oficial que esta en el apartado de herramientas. El tuyo es el tercero o cuarto. Ya que hay varios más dando vuelta por la net.

Voy a probarlo y comento luego.

I tested. Works fine so far. I have a few points to mentioned just if possible to add features as recomendations:

Can you add to Separate TV and Radio channels?
Can you add Video, Audio (additional or alternate audio opt), PCR id so we can add/modify new channels?
Can you add Video type H.264, H.265?
Can you add audio type MPEG2, AC3, AAC etc?
Channel Rename goes back to original name. Its not Save

Thanks for a good job!!

cpr43 wrote: ↑

Mon Jun 10, 2019 3:55 pm

I tested. Works fine so far. I have a few points to mentioned just if possible to add features as recomendations:

Can you add to Separate TV and Radio channels?
Can you add Video, Audio (additional or alternate audio opt), PCR id so we can add/modify new channels?
Can you add Video type H.264, H.265?
Can you add audio type MPEG2, AC3, AAC etc?
Channel Rename goes back to original name. Its not Save

Thanks for a good job!!

Thank you . For beggining i want to have knowlage if its working at all. Sure Ale can be done. Grid view channels will be containing tabs one for radio and second for tv. Video and audio tags under program will be included also into channel. Multi renaminig is not working I want to provide First working app than Focus on details which are also important. Also my plan contains coloring satelites,transponders That have channels inside. And after that manualy changeing channel details.

Appreciate your excellent working

I have clarification is it possible to add

Receiving and sending channels through IP address of gtc

Same as enigma receivers you can send and receive channels through channels loader using IP address


Appreciate

John1 wrote: ↑

Tue Jun 11, 2019 4:43 am

Appreciate your excellent working

I have clarification is it possible to add

Receiving and sending channels through IP address of gtc

Same as enigma receivers you can send and receive channels through channels loader using IP address


Appreciate

with that i don't know ? if some here know how to add this to channels info or if its possible at all, please rise you voice or post

Thank you for new editor.....will be possible add support for terrestrial channels in the future ??
Regards

Hi

Will you please update us for the progress as you have been mentioned within two weeks will be ready

Appreciate your excellent efforts

Muy bien hecho perro!!! Gran trabajo.

Ayer pude ordenar eficientemente la lista de Canales y Eliminar todos esos satelites que no sirven.
Solo deje el 61w - 70w y 81w

Recomendación. Agrega la opcion de editar TPs - Agregar y Borrar o editar.
Otra recomendación. Agrega la opcion de mover canales a "x" numero. Porque moverlos para arriba y para abajo lleva mucho tiempo!!

Pero bueno se agradece bastante. es mejor que estar 3hs con el control remoto editando canales desde el receptor. Te volves ptO!

Buenas tardes, acabo de descargar la aplicacion para el editor de canales en el Pc, como edito los canales? tengo que instalarla en el GTC? Gracias y saludos.

Hi I've downloaded your tool but I cannot find the channel list xml to open like shown in your video.
Can you upload it or tell me where to download?
Thanks

Gracias!! probado y funciona salvo el tema del botón de búsqueda... espero que sigan desarrollándola ya que sacan de un buen apuro, no he conocido otra aplicación de momento (que puedas eliminar, mover por bloques...).

Gracias

Estoy trasteando con la base de datos de bastantes canales y ejecutándola como administrador siempre, parece que a veces al eliminar ciertos canales, luego le doy a ordenar, la salvo y cuando la importo, me mantiene el orden pero al filtrar por nombres observo que siguen apareciendo canales duplicados por nombres...

Ahora estoy haciéndolo con poco registros y todo va estupendamente... seguiré probando... a ver... si conocéis alguna mejora en esta aplicación o alternativas más cómodas/fiables, agradecería mucho los comentarios.

Excellent work, please keep it up and alive.
You made my day, editing in the box itself is a painstaking task.
Thanks a lot!!

I am very disappointed in the GTC. High quality videos are not video audio sync. Channels are not so easy to sort as the simple V7S. Oscam is very difficult to edit. Remote control has no FAV function. I wonder if there was another manufacturer who has not considered the experience of other receivers. Too bad. Had to return the device and will deal with the V8.But the worst thing is just the discussed channel sorting and FAVS.

Hello.

Is there any possibility of editing DVB-T channels.
I don't know how to assign them and what channel numbers to give them.

I use GTMedia GTC DB Tools to edit channels. From HotBird satellite I have channels in the order of 1 to 465.
How to set channels from Astra 1E from 466 to 580 DB Tools persistently sets channels 1 to 154 for me. When I upload such a file to GTC, the channels are mixed up.

Czy jest jakaś możliwość edycji kanałów DVB-T, nie wiem jak je przypisać i jakie numery kanałów im nadać.

Używam GTMedia GTC DB Tools do edycji kanałów. Z satelity HotBird mam kanały w kolejności od 1 do 465.
Jak ustawić kanały z Astry 1E od 466 do 580 DB Tools uporczywie ustawia mi kanały od 1 do 154. Jak wrzuce taki plik do GTC to kanały mi sie mieszają.

Im trying to populate a favourite list and i'm failing!


GTC android box.

I have already edited channels in DB Tools HotBird 13E, Astra 1 and added DVB-T terrestrial channels.
It works, I have to make some corrections but it's ok.
Thanks for help.


Już zrobiłem edycję kanałów w DB Tools HB i Astra oraz dodałem kanały telewizji naziemnej DVB-T.
Działa to ale muszę nanieść poprawek ale jest ok.

Dziękuję za pomoc