No Signal

[seefoo]

Set the antenna data, scaned transponder, gound four feeds, Selected one of the feeds and get "no signal". If the system sees the signal enough to scan, why does it not produce a picture? GTS receiver....

[cpr43]

Set the antenna data, scaned transponder, gound four feeds, Selected one of the feeds and get "no signal". If the system sees the signal enough to scan, why does it not produce a picture? GTS receiver....

choose port 1 on diseqc 1.0 antenna setup even if you dont have a diseqc switch.

[seefoo]

After I posted, I turned on the GTS, went to a feed that was scanned and guess what. Picture. Didn't change a thing so I don't know why it's working now. Software !..

Thanks for the heads up on the diseqc. I'll keep that in mind.

Since you seem to be familiar with that box, when I go to record to the flash drive, the default number that comes up is 30. Do you know if that is seconds, minutes or what?

dave