IKS protocol
Moderators: admin, nzl229, GTMedia Team
IKS protocol
Good afternoon!
Is it possible to add the iks protocol in future updates of the GT series?
Is it possible to add the iks protocol in future updates of the GT series?
Re: IKS protocol
The GTC already has NEWCAMD and CCCAM. I use my GTC on IKS with NEWCAMD and it works fine.
This is what I have to do on my GTC, should be similar in other models :-
1.- Open DVB window >> press menu on R/C ... this will open the installation menu. Before you select an option press 6666 on the R/C. This will bring up another menu item "CS Protocol".
2.- Select CS Protocol >> Server Settings >> ADD >> fill in your data. If you use NEWCAMD the DES key is set to the default value. If you have a different DES key with ABCDEF there is a workaround, I will explain if needed.
3.- When finished reboot the box for changes to take effect.
PS you can add by USB but the DES key problem persists.
No live links (Rule #18) highlight the URL and use the Code tag option "</>"
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
Re: IKS protocol
I received my device a short time ago, I inserted some of the CS protocol, but it is not unlocking the channels. I believe I did everything right but even connected to the server is not working.
What does the acronym "AU" in the image mean? This field is always OFF on CS servers.
What does the acronym "AU" in the image mean? This field is always OFF on CS servers.
Re: IKS protocol
hellokamppello wrote: ↑Mon Dec 07, 2020 11:12 amI received my device a short time ago, I inserted some of the CS protocol, but it is not unlocking the channels. I believe I did everything right but even connected to the server is not working.
What does the acronym "AU" in the image mean? This field is always OFF on CS servers.
first,please confirm your account is working on another box.
second,can you please record the frequency data and send it to me
third:can you please PM your account to me,i will check it with you sent frequency data.
Re: IKS protocol
AU = Automatic Update (autoroll)... not needed in IKS. The only two readers you need to be "ON" are the "claro" and the "emulator" The other two are used when you are using your box as a server... not required in your case. They may be the problem the box is not working correctly, as your "claro" is shown as CONNECTED to the IKS server in the STATUS column.kamppello wrote: ↑Mon Dec 07, 2020 11:12 amI received my device a short time ago, I inserted some of the CS protocol, but it is not unlocking the channels. I believe I did everything right but even connected to the server is not working.
What does the acronym "AU" in the image mean? This field is always OFF on CS servers.
Which box are you using?? you should be able to turn the readers on/off with the button to the left of the readers name.
No live links (Rule #18) highlight the URL and use the Code tag option "</>"
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
Re: IKS protocol
Thanks for the help and explanation, Tom.w and juan_vale.
I'm using GTC. I managed to unlock the SD channels. Talking to some CS vendors and found out what was going on, some operators have updated their software and CS vendors are having a hard time. It seems that no vendor is able to unlock HD channels, and on the satellite I was trying to, they are not even unlocking SD channels.
40.5W - HD ???, SD ???
43.0W - HD OFF, SD ON
61.1W - HD OFF, SD OFF
70.1W - HD OFF, SD ON
I'm using GTC. I managed to unlock the SD channels. Talking to some CS vendors and found out what was going on, some operators have updated their software and CS vendors are having a hard time. It seems that no vendor is able to unlock HD channels, and on the satellite I was trying to, they are not even unlocking SD channels.
40.5W - HD ???, SD ???
43.0W - HD OFF, SD ON
61.1W - HD OFF, SD OFF
70.1W - HD OFF, SD ON
Re: IKS protocol
Hellojuan_vale wrote: ↑Mon Nov 09, 2020 5:33 pmThe GTC already has NEWCAMD and CCCAM. I use my GTC on IKS with NEWCAMD and it works fine.
This is what I have to do on my GTC, should be similar in other models :-
1.- Open DVB window >> press menu on R/C ... this will open the installation menu. Before you select an option press 6666 on the R/C. This will bring up another menu item "CS Protocol".
2.- Select CS Protocol >> Server Settings >> ADD >> fill in your data. If you use NEWCAMD the DES key is set to the default value. If you have a different DES key with ABCDEF there is a workaround, I will explain if needed.
3.- When finished reboot the box for changes to take effect.
PS you can add by USB but the DES key problem persists.
CCcam is ok ..but when I add newcamd or Mgcam both manual and through pendrive it does not work
I tried inputting as CWS = xxxxxxxx.net 10000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14
and
N: xxxxxx.net 11000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14
none work
please explain the workaround cited above
Re: IKS protocol
I will explain the workaround but first try this >>
N: xxxxxx.net 11000 user pass 0102030405060708091011121314
Also make sure you only have this line active... if you have too many lines active it can give you a problem.
UPDATE. You can find the "workaround" here >>
Code: Select all
https://1drv.ms/u/s!AolfhwuvBT0tgjrPt8AQwVRPqm3H?e=yi971J
No live links (Rule #18) highlight the URL and use the Code tag option "</>"
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
Re: IKS protocol
i'm very sorryjuan_vale wrote: ↑Wed Dec 16, 2020 4:33 pmI will explain the workaround but first try this >>
N: xxxxxx.net 11000 user pass 0102030405060708091011121314
Also make sure you only have this line active... if you have too many lines active it can give you a problem.
UPDATE. You can find the "workaround" here >>Code: Select all
https://1drv.ms/u/s!AolfhwuvBT0tgjrPt8AQwVRPqm3H?e=yi971J
May be I posted in the wrong place because my box is GTMEDIA V9 SUPER. It cannot be connected to with the port 8081
in your example ( workaround) it looks like Oscam....
The line does appear in the PROTOCOL menu but not connected to server
The DES Key always revert to 01 00 00 00 00 00 00 00 00 00 00 00 00 00 whatever key you input
That's appears to be a BUG.
Re: IKS protocol
Yes, wrong section and yes the V9 does not use OSCAM. Try to put the DESKey without spaces, a space is recognized as the end of a field, that is why you leave a space between "user" and "pswd"... if you leave a space after "01" you are saying that is the end of the DESKey. Try it without spaces and see if it works. I do not have a V9 so I can't give you much help there...sorry.patmos wrote: ↑Thu Dec 17, 2020 4:04 pmi'm very sorry
May be I posted in the wrong place because my box is GTMEDIA V9 SUPER. It cannot be connected to with the port 8081
in your example ( workaround) it looks like Oscam....
The line does appear in the PROTOCOL menu but not connected to server
The DES Key always revert to 01 00 00 00 00 00 00 00 00 00 00 00 00 00 whatever key you input
That's appears to be a BUG.
No live links (Rule #18) highlight the URL and use the Code tag option "</>"
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
Re: IKS protocol
Thank you i'll try that..juan_vale wrote: ↑Thu Dec 17, 2020 4:44 pmYes, wrong section and yes the V9 does not use OSCAM. Try to put the DESKey without spaces, a space is recognized as the end of a field, that is why you leave a space between "user" and "pswd"... if you leave a space after "01" you are saying that is the end of the DESKey. Try it without spaces and see if it works. I do not have a V9 so I can't give you much help there...sorry.patmos wrote: ↑Thu Dec 17, 2020 4:04 pmi'm very sorry
May be I posted in the wrong place because my box is GTMEDIA V9 SUPER. It cannot be connected to with the port 8081
in your example ( workaround) it looks like Oscam....
The line does appear in the PROTOCOL menu but not connected to server
The DES Key always revert to 01 00 00 00 00 00 00 00 00 00 00 00 00 00 whatever key you input
That's appears to be a BUG.
BTW what GTMEDIA model that is using oscam?
Re: IKS protocol
The GTC and GTS... I am not sure about the GTT, it is in the same family, so maybe. I use the GTC and I also have an E2 box. Good luck
No live links (Rule #18) highlight the URL and use the Code tag option "</>"
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
Re: IKS protocol
Thank you very much....
I did what your advise for the DES Key....but still not working
the digits are now visible
Re: IKS protocol
I sent you a PM
No live links (Rule #18) highlight the URL and use the Code tag option "</>"
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)