Gt Combo update

[cpr43]

Llego mi GT Combo le puse la última actualización desde Ota y tiene varios errores
No cambia de canal entre satélites
No hace autorroll en powervu ni Biss
Se bloquea al hacer búsqueda Ciega
Y otros errores más
Aún así es un equipo que con mejoras será un excelente equipo

Hola
Para Power Vu tienes que entrar tu Softcam. El softcam para estos modelos Android tipo Enigma2 es diferente a los equipos regulares. El equipo NO tiene llaves instaladas, no podra hacer el autoroll solo sin introducir llaves. Para Biss : esta activando la pantalla de Auto Biss cuando encuentras un canal Biss? (Estas conectado a internet?) Que satélites estas escaneando?? Gracias

[lilimar]

Hola tengo en casa los satélites
En Ku 30w, 61w, 70w, 76w, 81w
En banda C 40.5w, 43w, 55.5w
Aparte de este GT Combo también tengo los GT Media V8X y V8 UHD y esos me trabajan sin problemas

[cpr43]

Hola tengo en casa los satélites
En Ku 30w, 61w, 70w, 76w, 81w
En banda C 40.5w, 43w, 55.5w
Aparte de este GT Combo también tengo los GT Media V8X y V8 UHD y esos me trabajan sin problemas

En los canales Biss te esta activando el mensaje de AUTO BISS? Para los Power Vu te envio mensaje tambien privado

[lilimar]

No señor en Biss no esta activando la función de auto Update, ya tengo el equipo conectado a Internet

[Tom.w]

No señor en Biss no esta activando la función de auto Update, ya tengo el equipo conectado a Internet

hello
can you tell me more information about the no auto biss function.
what satellite,what transponder,what channel do you watch?
can you help me to record this transponder(using tp record function) by v8x or v8uhd.
then send it to me by hxxps://wetransfer.com/

[lilimar]

Hola anoche por fin logre abrir biss mediante auto Update pero solo fue en unos feed en 4.2.2 de la copa libertadores y copa sudamericana en el 43.1W y 55.5W Banda C, pero lamentablemente la imagen va muy lenta.
hoy voy a verificar con tps de canales biss fijos y te hago la grabación del TS con el V8X o V8 UHD

[lilimar]

He probado equipos Android de otras marcas y en esos equipos se puede usar el mismo softcam que actualmente uso en el V8X y V8 UHD sin necesidad de modificar el sofcam para nada.
Será que GT MEDIA nos podrá brindar esta misma opción en el GT Combo, que podamos usar el mismo sofcam del V8X o V8 UHD en el GT Combo sin necesidad de modificar el softcam.
Perdonen si me salto alguna regla pero solo quiero aportar ideas para hacer que el GT Combo sea un mejor Receptor

[cpr43]

He probado equipos Android de otras marcas y en esos equipos se puede usar el mismo softcam que actualmente uso en el V8X y V8 UHD sin necesidad de modificar el sofcam para nada.
Será que GT MEDIA nos podrá brindar esta misma opción en el GT Combo, que podamos usar el mismo sofcam del V8X o V8 UHD en el GT Combo sin necesidad de modificar el softcam.
Perdonen si me salto alguna regla pero solo quiero aportar ideas para hacer que el GT Combo sea un mejor Receptor

No habrá la necesidad. Las llaves se estarán añadiendo al firmware poco a poco de la misma manera que ese hizo con los modelos recientes.

[lilimar]

He probado equipos Android de otras marcas y en esos equipos se puede usar el mismo softcam que actualmente uso en el V8X y V8 UHD sin necesidad de modificar el sofcam para nada.
Será que GT MEDIA nos podrá brindar esta misma opción en el GT Combo, que podamos usar el mismo sofcam del V8X o V8 UHD en el GT Combo sin necesidad de modificar el softcam.
Perdonen si me salto alguna regla pero solo quiero aportar ideas para hacer que el GT Combo sea un mejor Receptor

No habrá la necesidad. Las llaves se estarán añadiendo al firmware poco a poco de la misma manera que ese hizo con los modelos recientes.

Excelente Noticia eso es un gran avance de parte de GT Media con el GT Combo

[daao10]

Hola anoche por fin logre abrir biss mediante auto Update pero solo fue en unos feed en 4.2.2 de la copa libertadores y copa sudamericana en el 43.1W y 55.5W Banda C, pero lamentablemente la imagen va muy lenta.
hoy voy a verificar con tps de canales biss fijos y te hago la grabación del TS con el V8X o V8 UHD

Saludos disculpa pudiste ver la llave de ese feed yo probé con el 67w KU pero no pude encontrar donde está la llave biss

[cpr43]

Hola anoche por fin logre abrir biss mediante auto Update pero solo fue en unos feed en 4.2.2 de la copa libertadores y copa sudamericana en el 43.1W y 55.5W Banda C, pero lamentablemente la imagen va muy lenta.
hoy voy a verificar con tps de canales biss fijos y te hago la grabación del TS con el V8X o V8 UHD

Saludos disculpa pudiste ver la llave de ese feed yo probé con el 67w KU pero no pude encontrar donde está la llave biss

Espera el próximo bin que sale pronto. En este podrás ver las llaves generadas

[fjlv1972]

thank you very much for your enjoying Gtmedia products.
we are doing our best for these issues and are improving Gtcombo performance.
after you upgrade the newest firmware,please tell me if you have any questions.

Best Regards.

el comentario es sobre la nueva actualizacion, salio con mas fallas que la primera (la de fabrica)
saludos!!

[faisal6]

Hello, the seller has sent me a message from AliExpress that I update to a new version that has many improvements, but I give it a search for an update and it does not jump to me to update, has the update appeared to any of you?

[cpr43]

Hello, the seller has sent me a message from AliExpress that I update to a new version that has many improvements, but I give it a search for an update and it does not jump to me to update, has the update appeared to any of you?

It shows todays date, give it a chance to be loaded to server and released. Probably on process

[faisal6]

Hello, the seller has sent me a message from AliExpress that I update to a new version that has many improvements, but I give it a search for an update and it does not jump to me to update, has the update appeared to any of you?

It shows todays date, give it a chance to be loaded to server and released. Probably on process

thank you very much for answering

[joviedop104]

I did a quick check with new versión A9.1.5.
Now the bisskeys are shown in a file, that can be found on the web menu

Powervu are still not opening automatically.
Also old powervu keys from GTC are not working, i think the new version use a different format.
Waiting to hear more about it.

Regards,
Johan

[Delirium]

Last firmware on:

viewtopic.php?f=56&p=97928#p97928

[Delirium]

T2-MI - 3.1° E - 4063 L - SR 33900 with last firmware

[tanka]

Quick cheek only about the 101w 103w satellites.Channels not working some freeze some not open.Exemple 101w at 3820h channels working.Then move to 3860h all channels not open.In that frequency even unplug the receiver and plug again.After the box reboot did move to the last channel working in the 3820h.(I loading the new firmware 2021057 clean the box then import channels softcam Cccam .)And channels same as before Iptv good.Hispansat west some times need to press ok and ok to many times.For the channels working.The box working but need much more improvements. At 101w 103w most the channels not working.The 101 west the only channels working are Jtv hd mpg4 metv hd Real Extreme Gol tv hd Newsy hd .The rest not working.At the same dish same tv same setup c band all working at V8UHD

[Isamu.Jones]

I bought GTMedia Combo, Android works excellent, very fast.
Excellent IPTV, very fast and stable.
Youtube very good.
VLC and Kodi very well.
Remote control is great.

Serious problems with DVB Player.
I updated to firmware GTCOMBO_v2.0_C20.A9.1.5_20210527.zip, it solved several problems of DVB Player, but there are still other problems that do not allow to use that characteristic of the equipment.

Detected problems:

Audio and video channels freezing problem persists every 5 to 10 min (random). It intensifies with the passing of the minutes. GTMedia Combo must be restarted for it to work again.

Switch problem persists (computer must be restarted every certain amount of time).

DVB Player has serious problems when tuning and playing channels of some TPs (it gets stuck asking to change the switch with a yellow button switch and it does not solve a problem).

DVB Player by default plays left audio, not stereo. You have to go channel by channel correcting the problem.

DVB Player is not able to configure a single audio track for all channels, it always shows in English, you have to manually change to another language channel by channel.

DVB Player satellite search is faster but it is not sensitive, it does not detect the same TP or channels as GTMedia GTC (Excellent decoder).

If the instability problem of DVB Player is due to the microphone system, it is better to disable that function.

GTShare_V7.1.4.0.210428 freezes the receiver when using DVB-S and DVB-S2. It does not allow you to select channels according to satellite or ISDB-TB.

Fixed issues:
DVB Player Newcamd works excellent for Nagra and Conax.

Please solve those inconveniences, many customers who bought from Aliexpress are complaining about the failures and opening disputes for bad product. Please review urgently.

Please help @Tom.w

[Feralkiwi]

Are the channels that do not open AAC audio. These are an issue for me.

I see my internet modem use light flashing when the channel stops.
Is that the microphone use you mentioned?
Please where is the disable for this?

I find that after reset or software updating the net use for this box is 94Mb.
There should be no use as I did not use youtude or other net functions.
I think this is apps updating and while this happens the satellite video stops as the processor time is taken.

Owen

[Isamu.Jones]

Are the channels that do not open AAC audio. These are an issue for me.

I see my internet modem use light flashing when the channel stops.
Is that the microphone use you mentioned?
Please where is the disable for this?

I find that after reset or software updating the net use for this box is 94Mb.
There should be no use as I did not use youtude or other net functions.
I think this is apps updating and while this happens the satellite video stops as the processor time is taken.

Owen

The problem is only with the APP DVB Player, it must have programming problems, since the previous version that the GTMedia GTC brought works excellent with the same network and conditions.
It is not a processor or network problem, it is a problem with the DVB Player App.

I have a theory that I have, perhaps by integrating search by microphone makes APP DVB Player unstable.

Internet use is variable, it can be decreased by disabling automatic updates from Google Play Store.

[Feralkiwi]

The problem is only with the APP DVB Player, it must have programming problems, since the previous version that the GTMedia GTC brought works excellent with the same network and conditions.
It is not a processor or network problem, it is a problem with the DVB Player App.

I have a theory that I have, perhaps by integrating search by microphone makes APP DVB Player unstable.

Internet use is variable, it can be decreased by disabling automatic updates from Google Play Store.

Yes I would like to remove the apps I do not use, like Google Play.
I have looked and can not find a remove app option or a update OFF.
From what I have been told setting update off does not stop Google updates anyway.

I spent some time watching both the DVB picture and the net use light and they always worked together, Video breaks up and then the net use light flashes.

Even with the net disconnected this still happens at the same sort of regular times.

Owen

[Tom.w]

about the gtcombo firmware issues,we are fixing them continue.
because there are many issues that needs to fix, so please give us some time,we will do our best.

[Tom.w]

Quick cheek only about the 101w 103w satellites.Channels not working some freeze some not open.Exemple 101w at 3820h channels working.Then move to 3860h all channels not open.In that frequency even unplug the receiver and plug again.After the box reboot did move to the last channel working in the 3820h.(I loading the new firmware 2021057 clean the box then import channels softcam Cccam .)And channels same as before Iptv good.Hispansat west some times need to press ok and ok to many times.For the channels working.The box working but need much more improvements. At 101w 103w most the channels not working.The 101 west the only channels working are Jtv hd mpg4 metv hd Real Extreme Gol tv hd Newsy hd .The rest not working.At the same dish same tv same setup c band all working at V8UHD

hello

when playing these channels.please try to confirm the oscam is working ok or not ?
you can see the oscam status from http://local ip address:8081/