GT MEDIA COMBO 61W KU
Moderators: admin, nzl229, GTMedia Team
GT MEDIA COMBO 61W KU
They know how to do blind search in the combo, I wanted to do it but they do not download all the tp and channels of the 61w KU.
Re: GT MEDIA COMBO 61W KU
You select the satellite for search in the satellite list.
then go to the antenna settings menu and set the LNB options to match your unit.
Then press the red button for search.
A search menu comes up and you can change the "Auto" to Blind and search.
Owen
then go to the antenna settings menu and set the LNB options to match your unit.
Then press the red button for search.
A search menu comes up and you can change the "Auto" to Blind and search.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- Posts: 23
- Joined: Sun May 30, 2021 8:27 pm
- Location: Santiago, Chile
Re: GT MEDIA COMBO 61W KU
Hi, what you say is correct, GT Combo has problems with blind scan with several satellites, download less channels and TP.
With the Amazon 61w satellite I had to do 10 blind scans and there I was able to add most of the channels. I suggest you do 1 blind scan, at the end, you must restart the Gtcombo. When turning on Gtcombo do a new blind scan until most of the channels are collected.
Re: GT MEDIA COMBO 61W KU
I've already done it and they don't download all the channels.
Re: GT MEDIA COMBO 61W KU
I'm going to try that way to see if it works because they only download 220 channels.Isamu.Jones wrote: ↑Tue Jul 06, 2021 3:10 amHi, what you say is correct, GT Combo has problems with blind scan with several satellites, download less channels and TP.
With the Amazon 61w satellite I had to do 10 blind scans and there I was able to add most of the channels. I suggest you do 1 blind scan, at the end, you must restart the Gtcombo. When turning on Gtcombo do a new blind scan until most of the channels are collected.
-
- Posts: 4
- Joined: Tue Jul 13, 2021 8:17 am
Re: GT MEDIA COMBO 61W KU
try to find the old software of 2018. it works ok.
the new firmware of 2021 is the worst (full of bugs)
the new firmware of 2021 is the worst (full of bugs)
Re: GT MEDIA COMBO 61W KU
GTMedia Combo was just released. You must be confusedAshraf Dingany wrote: ↑Tue Jul 13, 2021 1:00 pmtry to find the old software of 2018. it works ok.
the new firmware of 2021 is the worst (full of bugs)
-
- Posts: 4
- Joined: Tue Jul 13, 2021 8:17 am
Re: GT MEDIA COMBO 61W KU
no not confused, I and my brother just bought the GTCOMBO and I didn't update my receiver like my brother did and my firmware virgin is from 2018 and it works ok but my brother's receiver with the 2021 firmware is a total disaster.
-
- Posts: 4
- Joined: Tue Jul 13, 2021 8:17 am
Re: GT MEDIA COMBO 61W KU
I hope i can find the source of the older firmware virgins so I can download them and reinstall them in my brother's receiver
-
- Posts: 4
- Joined: Tue Jul 13, 2021 8:17 am
Re: GT MEDIA COMBO 61W KU
Shame, my first experience with GT media receivers, good hardware with a very poor firmware and a bad and buggy interface.
Re: GT MEDIA COMBO 61W KU
I will not argued. 2018 is 3 years ago. Guess that the GTCombo was not even on the designing board. On the other hand the old GTC model was at the time. Don't feel shame, you just arrived here. You will noticed that GTmedia support team is working hard to solve problems. Feel free to post your concerns.Ashraf Dingany wrote: ↑Wed Jul 14, 2021 12:54 pmShame, my first experience with GT media receivers, good hardware with a very poor firmware and a bad and buggy interface.