Can not find a way to add a new Radio channel at satellite 103.0W? I hit the +Add channel but nothings happens? Can you guide??Ihcsas wrote: ↑Fri Jul 23, 2021 7:36 pmI fixed the radio sid 0 bug, now I will finish the radio tab so that everything can be edited there.
I will create a manual as soon as almost everything works, radio, dvb-c and dvb-t would still be important to me.
GTC Channel Editor (BETA)
Moderators: admin, nzl229, GTMedia Team
Re: GTC Channel Editor (BETA)
Re: GTC Channel Editor (BETA)
Just trying it now but I'm still having troubles loading a file, it gives me the error of the picture that follows.
I checked the file with another program to see if data was present and it's all there.
I checked the file with another program to see if data was present and it's all there.
- Attachments
-
- 23-07-2021 22-41-32.jpg (13.5 KiB) Viewed 8076 times
-
- 23-07-2021 22-51-53.jpg (337.98 KiB) Viewed 8076 times
Re: GTC Channel Editor (BETA)
This feature is not active now, I working on it at the moment . (Tab Radio)cpr43 wrote: ↑Fri Jul 23, 2021 8:55 pmCan not find a way to add a new Radio channel at satellite 103.0W? I hit the +Add channel but nothings happens? Can you guide??Ihcsas wrote: ↑Fri Jul 23, 2021 7:36 pmI fixed the radio sid 0 bug, now I will finish the radio tab so that everything can be edited there.
I will create a manual as soon as almost everything works, radio, dvb-c and dvb-t would still be important to me.
Re: GTC Channel Editor (BETA)
Ok, excellent. I will wait, ThanksThis feature is not active now, I working on it at the moment . (Tab Radio)
Re: GTC Channel Editor (BETA)
Can you send me your XML File.
I updated the tool, Radio is working now.
Re: GTC Channel Editor (BETA)
I too have had the no element 0 message for most of my user files.
I also note that some of the screen in missing to the right, Please see the pic.
Attached is one of my user files.
Note this file has most of the DVB-T and cable listings removed, this make it a lot easier to use.
I did load one user file and that showed that the USALS lat / long is correctly saved for east satellites but not for west.
GT Media please take note of this.
Owen
.
.
.
I also note that some of the screen in missing to the right, Please see the pic.
Attached is one of my user files.
Note this file has most of the DVB-T and cable listings removed, this make it a lot easier to use.
I did load one user file and that showed that the USALS lat / long is correctly saved for east satellites but not for west.
GT Media please take note of this.
Owen
.
.
.
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: GTC Channel Editor (BETA)
Re: GTC Channel Editor (BETA)
I added a good amount of Radio channels. After finished I did the Export XML which creates a new file with todays date plus your name at the end. Unfurtunally, I am getting LOAD DB FILE ERROR 2 and data on my box was wiped out. I open the file with other XML reader and noticed the Audio PID missing from the save DB. Something went wrong. Lost a couple of hours of data entry After that I can no longer Import any DB
- Attachments
-
- dvbchannel_v30_2021_07_23_23_05_39_byIhcsas123.rar
- (53.51 KiB) Downloaded 130 times
Re: GTC Channel Editor (BETA)
Sorry to hear that... , I still messed up the binding yesterday while writing the XML-file, I fixed the bug and will upload the new version today. Before that I also want to look at the other situations.cpr43 wrote: ↑Sat Jul 24, 2021 3:20 amI added a good amount of Radio channels. After finished I did the Export XML which creates a new file with todays date plus your name at the end. Unfurtunally, I am getting LOAD DB FILE ERROR 2 and data on my box was wiped out. I open the file with other XML reader and noticed the Audio PID missing from the save DB. Something went wrong. Lost a couple of hours of data entry After that I can no longer Import any DB
Edit: Update is out, unfortunately I have programmed at night and some volatility errors in it, these are fixed.
The 0 Error could come through DVB-C/DVB-T, I will look today how far I can develop the import/export here.
I really need to buy a Freesat GT combo to test.
Re: GTC Channel Editor (BETA)
The exported file can be recover?
Note: Remember Freesat changed to GTMedia long time ago.
Note: Remember Freesat changed to GTMedia long time ago.
Re: GTC Channel Editor (BETA)
When importing, a window appears "XML Error" with text:
There is an error in the document XML (1,2),0
Here is a XML
hxxps://disk.yandex.ru/d/mHlby_pM8IraPA
There is an error in the document XML (1,2),0
Here is a XML
hxxps://disk.yandex.ru/d/mHlby_pM8IraPA
Re: GTC Channel Editor (BETA)
I don't overwrite the import file, I just create a new export file. Can't you import it back into the receiver?
I will change the name in the tool
It is not a GTcombo or GTC receiver/XML.
v8 Turbo maybe later.
Re: GTC Channel Editor (BETA)
I have had this no import or export of DB happen too, but not from editing.cpr43 wrote: ↑Sat Jul 24, 2021 3:20 amI added a good amount of Radio channels. After finished I did the Export XML which creates a new file with todays date plus your name at the end. Unfurtunally, I am getting LOAD DB FILE ERROR 2 and data on my box was wiped out. I open the file with other XML reader and noticed the Audio PID missing from the save DB. Something went wrong. Lost a couple of hours of data entry ;) After that I can no longer Import any DB :oops:
I think mine happened after I did some testing with DiSEqC positions / motor control.
The only fix I found was to reset.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: GTC Channel Editor (BETA)
I found I can move the partition in the middle to see all of the right side window.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: GTC Channel Editor (BETA)
I have a copy of my previous DB but with 1/2 of all the Radio channels needed to be added. That was the only version I could load. Re-type all missing ones again. For now I will wait until a few things are fixed hopefully more completed editor. Thanks
Re: GTC Channel Editor (BETA)
Sorry to hear that, I have ordered a GT combo now and will personally test before I release versions.
Re: GTC Channel Editor (BETA)
Re: GTC Channel Editor (BETA)
GTX Combo - V8 UHD - GT combo - V8 Finder Pro - V7 Pro - V8X - V8 Turbo - X8 - X8 combo - V8 Pro 2 - D2 DAB+
Re: GTC Channel Editor (BETA)
@Ihcsas
Very well, thanks again
Very well, thanks again
GTX Combo - V8 UHD - GT combo - V8 Finder Pro - V7 Pro - V8X - V8 Turbo - X8 - X8 combo - V8 Pro 2 - D2 DAB+
-
- Posts: 11
- Joined: Wed Dec 19, 2018 6:06 pm
Re: GTC Channel Editor (BETA)
Great Job!!!!!!!!
Support DVB-C GTmedia Combo 4k
Hello
Thank you so much for this great job, I have a GTmedia combo 4k but how do I work with channel list in DVB-C so when you will see a expectation for DVB-C support? thanks.
Thank you so much for this great job, I have a GTmedia combo 4k but how do I work with channel list in DVB-C so when you will see a expectation for DVB-C support? thanks.
Re: Support DVB-C GTmedia Combo 4k
I received my GT Combo, Im adding DVB-C and DVB-T support at the moment. Maybe Sunday new release.
Re: GTC Channel Editor (BETA)
It happened to me too and I finally realized that this happens when you export the file and then keep editing it to export it again when the job is done, this causes the channels to doubled up. After exporting you should close the program completely and then reopen it and load the latest exported file to continue editing it, in this way you will have only one copy of the stored channels on the new export or export to a new file because you are not saving but exporting and this means that the data you export is "added" to the existing data in that file if you don't create a brand new one.
Maybe Ihcsas can confirm this.
Maybe Ihcsas can confirm this.
Re: GTC Channel Editor (BETA)
Good. Try it and hope it'll work for you