Softcam File

GTMEDIA_GTX COMBO/GTX Twin/GTCOMBO /GTC /GTS /GTS-PRO /GTT2

Moderators: admin, nzl229, GTMedia Team

Post Reply
STRETCH
Posts: 3642
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Softcam File

Post by STRETCH »

What is the best way of getting a softcam file from the USB onto the GTMedia Combo.
A idiot's guide would be great.

Den

STRETCH
Posts: 3642
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: Softcam File

Post by STRETCH »

Has anyone know how to do this, could help other users, who wish to use the softcam of this receiver.

Den

User avatar
cpr43
网站管理员
Posts: 7049
Joined: Thu Aug 11, 2016 1:41 pm

Re: Softcam File

Post by cpr43 »

Create your softcam.key file and rename as: SoftCam.Key

Copy to your USB and load to GTCombo

Go to DVB section

Menu

Installation

Type 6666 on your remote control

A new screen will pop up at the bottom:

Enter to CS Protocol section

Enter to OSCAM Configuration section

You should see your Softcam.Key file in the screen

Hit OK over. A checkmark will be add at the right of file

Hit the Red boton for IMPORT

Done!!

Note:

(There is another option you can used: Green Boton to backup or make a copy of the box softcam.key file to your USB)

STRETCH
Posts: 3642
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: Softcam File

Post by STRETCH »

Thanks for the full details.

Den

STRETCH
Posts: 3642
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: Softcam File

Post by STRETCH »

Had a go at adding a softcam file from USB onto the receiver this morning, when you more the curser to the (Softcam Setting) and then press OK,
You get onto the screen were you can add (red) (Biss/Powervu) one at a time, what i would like is to see is the (import/export) this would bring this in line with other GTMedia receivers, this in turn will make it easy for users.

Den

User avatar
cpr43
网站管理员
Posts: 7049
Joined: Thu Aug 11, 2016 1:41 pm

Re: Softcam File

Post by cpr43 »

STRETCH wrote:
Mon Feb 21, 2022 9:32 am
Had a go at adding a softcam file from USB onto the receiver this morning, when you more the curser to the (Softcam Setting) and then press OK,
You get onto the screen were you can add (red) (Biss/Powervu) one at a time, what i would like is to see is the (import/export) this would bring this in line with other GTMedia receivers, this in turn will make it easy for users.

Den
Softcam setting section is for that. To add/edit delete one by one. You want to go to Oscam configuration section as explained to do the import/ export.

STRETCH
Posts: 3642
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: Softcam File

Post by STRETCH »

Thanks for confirming, still getting to grips with this receiver.
It would be better as a stand alone.

Den

Post Reply

Return to “GTMEDIA GT SERIES (Android DVB & IPTV BOX)”