gtcombo 4k what to change and what to improve.For the Moderator

GTMEDIA_GTX COMBO/GTX Twin/GTCOMBO /GTC /GTS /GTS-PRO /GTT2

Moderators: admin, nzl229, GTMedia Team

Post Reply
roman1963
Posts: 40
Joined: Sun Feb 27, 2022 9:38 am

gtcombo 4k what to change and what to improve.For the Moderator

Post by roman1963 »

Dla posiadaczy takiego dekodera bardzo ważna jest szybkość zmiany kanałów,płynność obrazu i jakość a w tym dekoderze ciągle tego brakuje.Nie powiem po ostatniej aktualizacji jest dużo lepiej ale to jeszcze nie to.

For owners of such a decoder, the speed of channel change, image fluidity and quality are very important, and this decoder still lacks it. I will not say after the last update it is much better but it's not yet.

na przykład:Astra 2E / Astra 2F / Astra 2G (28.2°E) wszystkie kanały nadawane w kodeku MPEG2 nie są płynne,jakby brakowało klatek w filmie.
for example:Astra 2E / Astra 2F / Astra 2G (28.2°E) all channels broadcast in MPEG2 codec are not smooth, as if frames were missing from the movie.

Przy zmianie kanałów reakcja pilota na gtcombo opóźniona o 3 sekundy
Przycisk info reakcja pilota na gtcombo opóźniona o 3 sekundy.
When changing channels, the reaction of the remote control to the gtcombo delayed by 3 seconds
Info button remote control reaction to gtcombo delayed by 3 seconds.
szybka zmiana kanałów o 3 w górę to już jest dla niego problem zastanawia się na jaki kanał został przełączony.
Pzy włączonej liście kanały zmieniają się bez problemu
fast channel change up by 3 is already a problem for him, he wonders which channel he has switched to.
When the list is turned on, the channels can change without any problem

Opis filmu epg nie jest cały
The epg movie description is not complete.
Attachments
niepełny epg.jpg
niepełny epg.jpg (712.95 KiB) Viewed 1495 times
cbbc_20150101-035402_LI.jpg
cbbc_20150101-035402_LI.jpg (1.12 MiB) Viewed 1495 times
pop_20150101-035210_LI.jpg
pop_20150101-035210_LI.jpg (1.08 MiB) Viewed 1495 times
Last edited by roman1963 on Sat Jul 30, 2022 10:56 pm, edited 2 times in total.

roman1963
Posts: 40
Joined: Sun Feb 27, 2022 9:38 am

Re: gtcombo 4k what to change and what to improve.

Post by roman1963 »

DVBT2 - tv das Erste. Problem z kodekiem LATM ,brak dźwięku.
DVBT2 -kanały tv (hevc) przy dźwięku EAC3 pojawią się trzaski,ponowna zmiana kanału pomaga tylko na jakiś czas,częste problemy z synchronizacją.

DVBT2 - tv das Erste. LATM codec problem, no sound.
DVBT2 - tv channels (hevc) with EAC3 sound there will be crackles, changing the channel again only helps for a while, frequent problems with timing.
Attachments
das erste 20150101-010337_LI.jpg
das erste 20150101-010337_LI.jpg (1.11 MiB) Viewed 1329 times
Das Erste HD-06242022-211036.rar
(10.36 MiB) Downloaded 9 times
polsat20220621-180954_LI.jpg
polsat20220621-180954_LI.jpg (1.1 MiB) Viewed 1329 times

roman1963
Posts: 40
Joined: Sun Feb 27, 2022 9:38 am

Re: gtcombo 4k what to change and what to improve.

Post by roman1963 »

Dvbt2 -ręczne wyszukiwanie jest bardzo utrudnione ponieważ nie wszyscy znają częstotliwości kanałów telewizyjnych.
Proszę o dodanie dodatkowej opcji wyszukiwania według kanału tak jak to jest w większości dekoderów.

Dvbt2 - manual search is very difficult because not everyone knows the frequencies of TV channels.
Please add an additional search option by channel as it is in most set-top boxes.
Attachments
scan manual Screenshot_20220724-162850.png
scan manual Screenshot_20220724-162850.png (662.08 KiB) Viewed 1141 times
scan by frequency  Screenshot_20220724-162850.png
scan by frequency Screenshot_20220724-162850.png (672.36 KiB) Viewed 1141 times

roman1963
Posts: 40
Joined: Sun Feb 27, 2022 9:38 am

Re: gtcombo 4k what to change and what to improve.

Post by roman1963 »

Gdy wyłączamy dekoder z prądu to czas się zmienia na 01.01.2015
Automatyczny czas i data działa tylko wtedy gdy jest uruchomiony internet.Proszę o dodanie opcji automatyczny czas Dvbt ,czas i data wysyłane są poprzez sieć.

When we disconnect the decoder from the power supply, the time changes to 01/01/2015
Automatic time and date only works when internet is running. Please add automatic Dvbt time, time and date are sent over the network.
Attachments
2 dvbt automatic time Screenshot_20220724-125126.png
2 dvbt automatic time Screenshot_20220724-125126.png (419.05 KiB) Viewed 1141 times
Screenshot_20150101-010733.png
Screenshot_20150101-010733.png (789.21 KiB) Viewed 1141 times
2 zegar i data 2 Screenshot_20150101-010829.png
2 zegar i data 2 Screenshot_20150101-010829.png (999.39 KiB) Viewed 1141 times
czas dvbt Screenshot_20150101-010811.png
czas dvbt Screenshot_20150101-010811.png (130.75 KiB) Viewed 1141 times

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: gtcombo 4k what to change and what to improve.

Post by Feralkiwi »

roman1963 wrote:
Sat Jul 30, 2022 2:31 pm
Gdy wyłączamy dekoder z prądu to czas się zmienia na 01.01.2015
Automatyczny czas i data działa tylko wtedy gdy jest uruchomiony internet.Proszę o dodanie opcji automatyczny czas Dvbt ,czas i data wysyłane są poprzez sieć.

When we disconnect the decoder from the power supply, the time changes to 01/01/2015
Automatic time and date only works when internet is running. Please add automatic Dvbt time, time and date are sent over the network.
I agree, a time from the DVB would help.
Even if I connect the internet and get the time up, it reverts to no time after I think 4 hours.
If manual time is set and it is at the old date time the internet browser ect will not work until the time is correct.
At least the browser will tell you this.

Of interest I see "14:00 New:Judge Rinder" on your last picture.
I too see this on the EPG on my unit.
Here in New Zealand there is a channel that has Judge Rinder on at 14:00.
How did that get on your unit?????
It must be some default listing in the software, maybe from some software test I returned to GT Media from here in NZ.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

roman1963
Posts: 40
Joined: Sun Feb 27, 2022 9:38 am

Load db file error 2

Post by roman1963 »

Nie mogę importować listy kanałów,za każdym razem wyskakuje błąd 2 (ładowanie pliku db zakończyło się błędem 2)

I can't import the channel list, I get error 2 every time (Load db file error 2)
Attachments
db error 2.rar
(14.92 MiB) Downloaded 4 times

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Load db file error 2

Post by Feralkiwi »

roman1963 wrote:
Thu Aug 11, 2022 8:11 pm
Nie mogę importować listy kanałów,za każdym razem wyskakuje błąd 2 (ładowanie pliku db zakończyło się błędem 2)

I can't import the channel list, I get error 2 every time (Load db file error 2)
There have been more entries added to the channel list format, so older format lists will not load on the newer software.

If you saved with the new software, then yes the list should load.
Did you change the list at all?
I have not use the editor of late, but it may save in older format and then not load.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

roman1963
Posts: 40
Joined: Sun Feb 27, 2022 9:38 am

Re: gtcombo 4k what to change and what to improve.For the Moderator

Post by roman1963 »

Pobrałem nową listę GIORGIO team GTMediaCombo mot usals i również pojawił się błąd 2.Trzeba będzie zrobić reset to może błąd zniknie.

I downloaded the new GIORGIO team GTMediaCombo mot usals list and also got an error 2. You will need to reset it, maybe the error will disappear.

STRETCH
Posts: 3641
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: gtcombo 4k what to change and what to improve.For the Moderator

Post by STRETCH »

It is best to make your own list, scan in the channels that you require, and put them in the order that you require.
Third party lists may not have the channels that you require and have them in the order that you require, plus they may brick your receiver.
With you making your own list, just save to USB as a back-up.

Den

avalanche
Posts: 168
Joined: Sat Jul 18, 2020 6:18 am

Re: gtcombo 4k what to change and what to improve.For the Moderator

Post by avalanche »

roman1963 wrote:
Fri Aug 12, 2022 3:29 am
Pobrałem nową listę GIORGIO team GTMediaCombo mot usals i również pojawił się błąd 2.Trzeba będzie zrobić reset to może błąd zniknie.

I downloaded the new GIORGIO team GTMediaCombo mot usals list and also got an error 2. You will need to reset it, maybe the error will disappear.
Hi roman1963 have you installed the latest firmware version?

roman1963
Posts: 40
Joined: Sun Feb 27, 2022 9:38 am

Re: gtcombo 4k what to change and what to improve.For the Moderator

Post by roman1963 »

Mam aktualne oprogramowanie GT Combo C20.A9.1.17

I have the current GT Combo C20.A9.1.17 software.

avalanche
Posts: 168
Joined: Sat Jul 18, 2020 6:18 am

Re: gtcombo 4k what to change and what to improve.For the Moderator

Post by avalanche »

roman1963 wrote:
Mon Aug 15, 2022 1:56 pm
Mam aktualne oprogramowanie GT Combo C20.A9.1.17

I have the current GT Combo C20.A9.1.17 software.
Sorry, but I can't replicate the error. Everything works fine for me

Post Reply

Return to “GTMEDIA GT SERIES (Android DVB & IPTV BOX)”