GT Combo extract rolled key data
Moderators: admin, nzl229, GTMedia Team
-
- Posts: 3
- Joined: Sat Jun 12, 2021 2:49 am
GT Combo extract rolled key data
Has anybody had success in extracting a rolled key from a GT Combo ??
This is the process I have followed:
Go to DVB Section / Menu / Installation / Then 6666 / On the next screen go to CS Protocol / OK / Go to OSCAM Configuration / Green button to export to USB
But when opening the USB files in any/all of wordpad notepad MS Word and Neat Office they all show up as blank files.
I have used multiple reformatted USBs.
I have no problems doing this on V8x and V9 Prime.
Am I missing something ??? TIA
Cheers & beers
Kiwicuzzie
This is the process I have followed:
Go to DVB Section / Menu / Installation / Then 6666 / On the next screen go to CS Protocol / OK / Go to OSCAM Configuration / Green button to export to USB
But when opening the USB files in any/all of wordpad notepad MS Word and Neat Office they all show up as blank files.
I have used multiple reformatted USBs.
I have no problems doing this on V8x and V9 Prime.
Am I missing something ??? TIA
Cheers & beers
Kiwicuzzie
Re: GT Combo extract rolled key data
I am having the same issue, to add to the issue, i am not able to add the softcam, that i had on usb, (it is like that the receiver does not see the USB,) which i had before the last update.
Have tried putting in the keys for A F N with the remote, and still they do not decode with this receiver, like it does with V8X/V7PRO/V7S2X.
If they made this receiver a stand alone, with the 4.2.2 and without all the addon's or bring it into line, like the V8X/V7PRO/V8UHD.
Which will make it a good receiver, even for feed hunters.
Den
Have tried putting in the keys for A F N with the remote, and still they do not decode with this receiver, like it does with V8X/V7PRO/V7S2X.
If they made this receiver a stand alone, with the 4.2.2 and without all the addon's or bring it into line, like the V8X/V7PRO/V8UHD.
Which will make it a good receiver, even for feed hunters.
Den
Re: GT Combo extract rolled key data
Hello
Remember that the the GTCombo works using Oscam. The best option to add/ dump or modify keys is using the FTP option.
http://192.168.0.24:8081/files.html?file=SoftCam.Key
You need to change 192.168.0.24 with your actual box i.p. address
Remember that the the GTCombo works using Oscam. The best option to add/ dump or modify keys is using the FTP option.
http://192.168.0.24:8081/files.html?file=SoftCam.Key
You need to change 192.168.0.24 with your actual box i.p. address
-
- Posts: 3
- Joined: Sat Jun 12, 2021 2:49 am
Re: GT Combo extract rolled key data
THANK YOU cpr43 !!! Brilliant advice. SUCCESS with your method.
- Attachments
-
- 298096669_2291165211040231_6892788538583095863_n.jpg (39.79 KiB) Viewed 1792 times
-
- 298096669_2291165211040231_6892788538583095863_n.jpg (39.79 KiB) Viewed 1792 times
Re: GT Combo extract rolled key data
Yes I got it to work after I got the correct IP address in.
I also got it to work on the browser on the GT Combo.
There you need to type the numbers etc into the address line as the auto fill takes it to the search function.
After you get it typed in and working you can save it to bookmarks and get to it again from there.
It would be very good to have the EPG folder open in this oscam page as well so users can delete one channel files or add info.
I will ask GT Media if this can be done
I have not tested, but I expect this is where any "Screen saver" picture is saved in the 'User File" section.
Screen saver is found by pressing and hold the power button and then select screen shot.
Owen
I also got it to work on the browser on the GT Combo.
There you need to type the numbers etc into the address line as the auto fill takes it to the search function.
After you get it typed in and working you can save it to bookmarks and get to it again from there.
It would be very good to have the EPG folder open in this oscam page as well so users can delete one channel files or add info.
I will ask GT Media if this can be done
I have not tested, but I expect this is where any "Screen saver" picture is saved in the 'User File" section.
Screen saver is found by pressing and hold the power button and then select screen shot.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: GT Combo extract rolled key data
hola, como se pone con usb o se puede hacer manual.Gracias
Re: GT Combo extract rolled key data
If you open the internet browser on the box or your PC and enter this in the address line.
Code: Select all
192.168.x.xxx:8081
My address is
Code: Select all
192.168.1.109:8081
You will end with this line on the browser address line, note again you need to make the 1.109 match YOUR IP address, not mine.
Code: Select all
http://192.168.1.109:8081/files.html?file=autobiss.Key
Anything after the ; is comment. The autoBiss adds a frequency and longitude and SID as it enters the codes
Owen
Sample from mine: codes changed to comply with forum rule: RULE #17--KEYS---No Keys in public will be allowed.
The stuff in blue I added for my own notes.
F 0000 00 1234567890ABCDEF;1005:03861:0001
F 0000 00 1234567890ABCDEF;1520:12668:0001:whateveryouwant28dec
F 0000 00 3683742DF29E8111;1005:03895:0001
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: GT Combo extract rolled key data
Hola, muchas gracias haber si puedo hacerlo, soy bastante torpe con estas cosas.Saludos
-
- Posts: 4
- Joined: Mon Jan 09, 2023 3:40 pm
Re: GT Combo extract rolled key data
I have a v9. Prime I am not sure how to put oscam? Into my box thanks GarySTRETCH wrote: ↑Mon Aug 08, 2022 1:45 pmI am having the same issue, to add to the issue, i am not able to add the softcam, that i had on usb, (it is like that the receiver does not see the USB,) which i had before the last update.
Have tried putting in the keys for A F N with the remote, and still they do not decode with this receiver, like it does with V8X/V7PRO/V7S2X.
If they made this receiver a stand alone, with the 4.2.2 and without all the addon's or bring it into line, like the V8X/V7PRO/V8UHD.
Which will make it a good receiver, even for feed hunters.
Den
Re: GT Combo extract rolled key data
You can't put it, you could only make small modifications if the options are in the firmware
-
- Posts: 4
- Joined: Mon Jan 09, 2023 3:40 pm
Re: GT Combo extract rolled key data
I am not sure how do I need to use a USB? I am new to all this thanks Gary
-
- Posts: 4
- Joined: Mon Jan 09, 2023 3:40 pm
Re: GT Combo extract rolled key data
How can I put icam patch oscam in my v9. Prime?
Re: GT Combo extract rolled key data
No way to do it. Close source wont allow to update android Oscam version
-
- Posts: 4
- Joined: Mon Jan 09, 2023 3:40 pm
Re: GT Combo extract rolled key data
Thanks for that so what received can then?