Hi,
Suddenly my GTCombo stopped booting. It is looping between Loading and booting .
I was not trying to upgrade or do anything !!
Any idea how to fix this?
Thanks
GTCOMBO booting problem
Moderators: admin, nzl229, GTMedia Team
Re: GTCOMBO booting problem
Please check the power supply first, you can use the router power supply to rule out
Re: GTCOMBO booting problem
Unplug from power, HDMi and coax cable.
Wait sometime. Plug power back only
See if it boot on front panel?
Wait sometime. Plug power back only
See if it boot on front panel?
-
- Posts: 40
- Joined: Thu Apr 19, 2018 9:35 am
Re: GTCOMBO booting problem
Tried replacing the power supply but did not boot.
Then tried to unplug from power, HDMI and coax cable and waited overnight but still it did not boot.
Do i have to flash it?
If yes can someone send me the link for the flashing file and how to do it.
Thanks
Then tried to unplug from power, HDMI and coax cable and waited overnight but still it did not boot.
Do i have to flash it?
If yes can someone send me the link for the flashing file and how to do it.
Thanks
-
- Posts: 40
- Joined: Thu Apr 19, 2018 9:35 am
Re: GTCOMBO booting problem
I read in the forum that i have to try loading the latest software from zip file on a usb while pressing the reset button o the back of the receiver.
This method also did not work for me.
Anyone had the same issue that can help?
Thank you
This method also did not work for me.
Anyone had the same issue that can help?
Thank you
-
- Posts: 40
- Joined: Thu Apr 19, 2018 9:35 am
Re: GTCOMBO booting problem
Finally i found the solution.
I had to do a factory reset and now it is working fine.
I had to do a factory reset and now it is working fine.