Page 1 of 1
Gt Combo firmware update problem/ decoder won't start
Posted: Fri Feb 02, 2024 8:13 pm
by kubasz97
Hello
I have a gt combo decoder that won't start. I tried to upload the firmware using USB BURNINIG but I get a disk initial error. I need help.
Re: Gt Combo firmware update problem/ decoder won't start
Posted: Sat Feb 03, 2024 2:44 pm
by cpr43
kubasz97 wrote: ↑Fri Feb 02, 2024 8:13 pm
Hello
I have a gt combo decoder that won't start. I tried to upload the firmware using USB BURNINIG but I get a disk initial error. I need help.
viewtopic.php?f=67&t=14431
Re: Gt Combo firmware update problem/ decoder won't start
Posted: Sun Feb 04, 2024 3:03 pm
by kubasz97
This metod not working. I can't turn on a recorvery mode.
Re: Gt Combo firmware update problem/ decoder won't start
Posted: Sun Feb 04, 2024 8:51 pm
by Feralkiwi
Stuff on
reset button here.
.
.Owen
.
Re: Gt Combo firmware update problem/ decoder won't start
Posted: Mon Feb 19, 2024 4:45 pm
by kubasz97
I know, but this method doesn't work.
Re: Gt Combo firmware update problem/ decoder won't start
Posted: Mon Feb 19, 2024 8:28 pm
by Feralkiwi
If you have a USB stick with a LED you should see the LED flashing as the recovery starts.
You use the file still in the .zip folder.
Owen
Re: Gt Combo firmware update problem/ decoder won't start
Posted: Mon Mar 04, 2024 5:30 pm
by xboxbuci
