Hello
I have a gt combo decoder that won't start. I tried to upload the firmware using USB BURNINIG but I get a disk initial error. I need help.
Gt Combo firmware update problem/ decoder won't start
Moderators: admin, nzl229, GTMedia Team
Re: Gt Combo firmware update problem/ decoder won't start
This metod not working. I can't turn on a recorvery mode.
Re: Gt Combo firmware update problem/ decoder won't start
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Gt Combo firmware update problem/ decoder won't start
I know, but this method doesn't work.
Re: Gt Combo firmware update problem/ decoder won't start
If you have a USB stick with a LED you should see the LED flashing as the recovery starts.
You use the file still in the .zip folder.
Owen
You use the file still in the .zip folder.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Gt Combo firmware update problem/ decoder won't start
Hello, I sent you a gt media combo sat box with the latest FW run. the dvb service is constantly down.
I put back an older FW but there is the same error..... the box is unusable
I put back an older FW but there is the same error..... the box is unusable