New GTMedia-Freesat GTC Firmware released

[cpr43]

New GTMedia-Freesat GTC Firmware released

Only OTA Update for now. Connect your box to internet and follow screen instructions. We will begin test and post results

[rohitpoint]

Updated before 30min.....

Looks like same DVB app.. still not able to find all channels (95e), only i have to choose d switch v1.1 to port 1 to find all channels. Otherwise channels comes in scanning but after reboot no signal problem.

New software is very buggy, old was good....

But new interface is very user friendly.

[fpadilla]

Ya he instalado la nueva actualización. El interfaz muy amigable.
Pero por lo que he podido comprobar, la exportación de la DB sigue dando el error 2.
Me pasa a mi solo?

[shin]

Nice, updating...

I suggest you guys put a DDL link for the previous firmware version, just in case this new firmware is so buggy, we can easily downgrade it.

[Spieth]

Buenas tardes,

¿Soy el único al que no le aparece la actualización?

Gracias

[rohitpoint]

Serious bug-

Channel number keep changing.... Very disappointed with new software.... Please provide old software link.

If I change channel I get error-
"Channel has changed.. updating.."

[shin]

Whoa whoa guys, did you just removed the option to import SoftCam.Key? lol

I can't seem to find that option anymore, or am I missing something here?

[tolinhas]

Serious bug-

Channel number keep changing.... Very disappointed with new software.... Please provide old software link.

If I change channel I get error-
"Channel has changed.. updating.."

i ve that bug , but the problem it´s cccam

menu- 6666 and activate cccam again and problem resolved

other bug, last firmware and the new one

dtv app :
remote change to cursor mode many times without key is pressed

[axwal13]

The good things about this update is the interface it's so beautiful lovely. Thank you any way

The new DVB app is so buggy and is it very worst because we have lost to many channels and when you do scan they came remaining like 5 times and some of them they came like that (NONAME)

AND olso there is no key or patch menu, even we have told you about to be add.

I love to know where is VANILLA protocol server.

In the end please fix the DVB ASAP please,

[shin]

I like the new user interface. Also, navigating on the DVB app is much faster now.

However, here are some problems I encountered:

- Option to import SoftCam.Key is missing
- DVB subtitles are not displaying
- Annoying "Channel has changed. Updating..." message appearing
- Accessing the items under CS Protocol sometimes makes the app restart or crash
- Channel freezing problem on some PVu channels on Intelsat 19 still not fixed
- You also still haven't fixed this:


- This error appears when I try to access my flash drive using other file browser app


You should provide a download link for the previous firmware version until these problems are solved.

Cheers.

[hcaversan]

Boa noite, alguem pode me judar,nao consigo fazer pegar cabo no meu freesat GTC Brasil estado de são paulo

[Feralkiwi]

Still does NOT do DiSEqC 1.1 AND 1.0 (cascade) switching.

Had it turn the LNB power off, I had to power off / on to fix it.

Owen

[txyky]

hola he actualizado al nuevo firmware y con el no se pueden colocar los canales en vez de mejorar empeoramos.

[freesatv7]

Very good work on interface I think this update was released because of our pressure. It wasn't ready so developer take your time to finish. I see promising result. Thanx

[fidel]

Buenas lo único que habéis hecho es un lavado de cara .por lo demás todo sigue igual ,tiempo perdido para nada

[milansat]

The problem off new firmware is:
1- Teletext not working
2- Subtitles not working
3- When open the dtv i put ok for open channel list. when select a channel to view i put ok the channel list not remove need to press exit.you an do when i select ok the channel list exit. Not when select exit everywhere.
4- In google chrome when open video in full screen the screen got to green and block the application.

[toespami]

Ahora no se pueden colocar los canales??? Y tampoco parece que deje guardar la lista de canales, pero claro, tiene su lógica, si no deja colocarlos para que vamos a querer guardarlos......que chicos más listos.....Haced el favor de solucionar ese pequeño problema por favor. Es primordial poder colocar los canales y luego poder guardarlos en caso de reseteo al libre albedrío como ya me ha hecho alguna vez. Al menos pude colocar los canales de nuevo.....ahora..........vaya tela. La interface cojonuda por cierto, pero hay que mejorar lo realmente importante. Un saludo.

[taikwang]

Unrooted box can not upgrade

[bark_41]

installation issue

20180729_082414.jpg (6.02 MiB) Viewed 10422 times

[Arzagosa]

Hello
Any body know the procedure to upload the chanel list and the other thinks? I have test with the 6666 and don´t work.
Thanks for the help.

[JSat]

It also missed the mains: Update for Android 7. As it had been promised. Update Oscam and compatibility with video 4: 2: 2.

[Jos]

it still does not work the 22k and has no place for the softcam solve it

[kyle]

Sorry for the problems, we have asked our engineers to check all problems you mentioned, and I will reply our schedule of fixing problems later.

[bark_41]

20180730_184447_HDR.jpg (5.37 MiB) Viewed 7324 times

20180730_185219_HDR.jpg (4.6 MiB) Viewed 7324 times

20180730_184447_HDR.jpg (5.37 MiB) Viewed 7324 times

I could not upload this update.(

[retalhador]

The problem off new firmware is:
1- Teletext not working
2- Subtitles not working
3- When open the dtv i put ok for open channel list. when select a channel to view i put ok the channel list not remove need to press exit.you an do when i select ok the channel list exit. Not when select exit everywhere.
4- In google chrome when open video in full screen the screen got to green and block the application.

In the last firmware it was necessary to enable the HDMI-CEC, then make the channel search after it was enabled. After this it worked the subtitles for DVB-C in my region(Brazil). However after the update the HDMI CEC has disappeared, so do not working the subtitles now.
New version issues.
1- Lost ROOT after upgrade.
2- HDMI CEC has disappeared
3- ISDB-T Search has no way to edit the 8MHz, my region is 6MHz (Brazil - Rio de Janeiro)
4- The special characters "ç", "ã", "õ", "á", etc. do not work yet.
Need include Character Set ISO-8859-1.