Buenas tardes, soy una usuario nuevo y me he comprado un decodificador gtmedia v9 prime y no consigo ver nada. Trato de seguir todos los pasos y al final solo consigo que ponga que no hay canales
Por favor, que alguien me ayude.
Gracias
Instalación de gtmedia v9 prime
Moderators: admin, GTMedia Team
Re: Instalación de gtmedia v9 prime
You need to set the LNB frequency to match the dish / LNB you have. Try 9750/10600
Then you need to do a blind scan. This will show channels even if you have the LNB frequency incorrect.
If you have a community antenna, you may need different settings.
Owen
Then you need to do a blind scan. This will show channels even if you have the LNB frequency incorrect.
If you have a community antenna, you may need different settings.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Instalación de gtmedia v9 prime
Te falta cargar una lista de canales mediante actualización dbuser, o hacer una búsqueda a ciegas al satélite que estés conectado
Re: Instalación de gtmedia v9 prime
V9 Prime, V169 firmware - Permanent stops of sound and video for a split second on all channels. I am not already writing about it for the first time, but there is no answer from programmers.
Put the v.170- nothing has changed, these problems remained.
Put the v.170- nothing has changed, these problems remained.