Instalación de gtmedia v9 prime

GTMEDIA V9 super V9Prime

Moderators: admin, GTMedia Team

Post Reply
Helen55
Posts: 1
Joined: Thu Dec 31, 2020 5:38 pm

Instalación de gtmedia v9 prime

Post by Helen55 »

Buenas tardes, soy una usuario nuevo y me he comprado un decodificador gtmedia v9 prime y no consigo ver nada. Trato de seguir todos los pasos y al final solo consigo que ponga que no hay canales
Por favor, que alguien me ayude.
Gracias

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Instalación de gtmedia v9 prime

Post by Feralkiwi »

You need to set the LNB frequency to match the dish / LNB you have. Try 9750/10600
Then you need to do a blind scan. This will show channels even if you have the LNB frequency incorrect.

If you have a community antenna, you may need different settings.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

User avatar
CAJE
网站管理员
Posts: 2262
Joined: Sun Dec 06, 2020 8:00 pm

Re: Instalación de gtmedia v9 prime

Post by CAJE »

Helen55 wrote:
Sun Nov 28, 2021 4:54 pm
Buenas tardes, soy una usuario nuevo y me he comprado un decodificador gtmedia v9 prime y no consigo ver nada. Trato de seguir todos los pasos y al final solo consigo que ponga que no hay canales
Por favor, que alguien me ayude.
Gracias
Te falta cargar una lista de canales mediante actualización dbuser, o hacer una búsqueda a ciegas al satélite que estés conectado

Abu
Posts: 24
Joined: Wed Dec 25, 2019 6:38 am

Re: Instalación de gtmedia v9 prime

Post by Abu »

V9 Prime, V169 firmware - Permanent stops of sound and video for a split second on all channels. I am not already writing about it for the first time, but there is no answer from programmers.:oops:
Put the v.170- nothing has changed, these problems remained.

Post Reply

Return to “GTMEDIA V9 SERIES”