GTMEDIA V9 SUPER - Rebooting

[dushan]

Continue rebooting when I connect my GTMEDIA V9 SUPER wi-fi and cccam. How to solve this problem ?.

Significant 07-17 updates have also been made. I tried cccam from a few people. After a while the problem reappears.

[alex.c]

please PM your cccam account, I will check it.
Thank you.

[weerakoon]

My STB came with firmware 373, but not connect youtube, so I updated your latest firmware 398.now youtube network error ok. Now my new problem is when connect with cccam server Continue rebooting Stb.I tested over 5 cccam server,error is same,but connect with 373 not found such a error.Please Give me a solution.thank you.

[alex.c]

My STB came with firmware 373, but not connect youtube, so I updated your latest firmware 398.now youtube network error ok. Now my new problem is when connect with cccam server Continue rebooting Stb.I tested over 5 cccam server,error is same,but connect with 373 not found such a error.Please Give me a solution.thank you.

please send me your cccam account, then I can fix it. thankyou.

[weerakoon]

C: cccamboss.com 16000 0751462 5134679
(you can get free test line above server)

[alex.c]

C: cccamboss.com 16000 0751462 5134679
(you can get free test line above server)

Hi, if I just stay in the menu, don't watch any program.
Will this issue happen?

[weerakoon]

This happens after connected cccam and select another scramble channel not related to ccam server.If suddenly selected a FTA one not reboot.

[Lining]

Continue rebooting when I connect my GTMEDIA V9 SUPER wi-fi and cccam. How to solve this problem ?.

Significant 07-17 updates have also been made. I tried cccam from a few people. After a while the problem reappears.

Would you take a version message for me to see? Is your WIFI MAC display normal, can you record the TS stream to me?

[007jb]

El problema del reinicio se debe a exceso de temperatura del modulo wifi.El 398 parece que lo fuerza un poco.
Solucion ,poner activa una sola cccam y ventilacion usb añadida al V9 para su refrigeración.
Yo lo solucione así.

[ahaqwxl001]

when I switch to the programs of Irdeto ,the 9 super will reboot again and again.Could you please fix this bug?

[MarcoMart]

I do have the same problem, it seems when a channel uses irdeto 2 the box keeps booting in loop.

[alex.c]

We will release new firmware to fix this issue when watch irdeto channel by cccam.

[cpr43]

We will release new firmware to fix this issue when watch irdeto channel by cccam.

Alex
please go over the GTMEDIA_V9 Series Bug Tracking System! post and see which one can be work out. Thanks

viewtopic.php?f=57&t=19029

[alex.c]

We will release new firmware to fix this issue when watch irdeto channel by cccam.

Alex
please go over the GTMEDIA_V9 Series Bug Tracking System! post and see which one can be work out. Thanks

viewtopic.php?f=57&t=19029

OK, will check if we can fix some of them.
Thanks.

[guenni]

Hello, I have the same problem. My V9 TV receiver boots when switching within the encrypted channels. Is there already a new firmware that solves this problem? thank you

[Usiek]

Same problem on V9 and V8 Super

[guenni]

We will release new firmware to fix this issue when watch irdeto channel by cccam.

Alex
please go over the GTMEDIA_V9 Series Bug Tracking System! post and see which one can be work out. Thanks

viewtopic.php?f=57&t=19029

OK, will check if we can fix some of them.
Thanks.

Hello, do you have any news about the Rebooting Problem V9????

[2910]

Hello, on 18.11. about 28 programs were added on the 23.5 ° East satellite within Skylink. All programs are coded by Irdeto, Viacess and V9 restarts around again. These programs are on the frequencies 12012 V, 11953 H, 12110 H speed is 29900. If you change to a program on another transponder, then V9 goes OK.

[Tom.w]

Hello, on 18.11. about 28 programs were added on the 23.5 ° East satellite within Skylink. All programs are coded by Irdeto, Viacess and V9 restarts around again. These programs are on the frequencies 12012 V, 11953 H, 12110 H speed is 29900. If you change to a program on another transponder, then V9 goes OK.

hello
can you please help me record the frequency 12012 V29900 data, then send it to me with https://wetransfer.com/.
we will check it

[Tom.w]

Hello, on 18.11. about 28 programs were added on the 23.5 ° East satellite within Skylink. All programs are coded by Irdeto, Viacess and V9 restarts around again. These programs are on the frequencies 12012 V, 11953 H, 12110 H speed is 29900. If you change to a program on another transponder, then V9 goes OK.

hello
did you update the newest firmware v400 from viewtopic.php?f=59&t=6522(GTMedia_V9Sup ... _V400.zip).
if not,please update the v400 firmware,then test it with Irdeto channels.

[2910]

The frequencies are 12012, 11953 and 12110 . I have fw 398. I'll try to give 400. The only problem is that then I have to retune all the satellites.

[STRETCH]

Save your (system data) to a usb, update, then reinput you (data) back into the receiver.

Den

[2910]

Save your (system data) to a usb, update, then reinput you (data) back into the receiver.

Den

Then why does invalid write? Advise on how to upload programs from USB. I also have them stored on my PC. Well thank you.

[2910]

Save your (system data) to a usb, update, then reinput you (data) back into the receiver.

Den

Then why does invalid write? Advise on how to upload programs from USB. I also have them stored on my PC. Well thank you.

It helped that I had it stored on my PC, I opened it via an editor, made two changes and sent it back to USB. Then I inserted USB into GT Media V9 Super and uploaded my channels. So that's probably how to get the setting into the V9 Super.