PowerVue Keys are not saving in new firmware

[palakanit]

Hi,

I have GTMedua V9 Super and I installed GTMedia V9 Super Firmware (23/07/2019) in my device but the problem is am unable to save the PowerVue keys in it. ANy issue and solution to overcome from this perticular issue.

[cpr43]

Hi,

I have GTMedua V9 Super and I installed GTMedia V9 Super Firmware (23/07/2019) in my device but the problem is am unable to save the PowerVue keys in it. ANy issue and solution to overcome from this perticular issue.

Hello

read here:

viewtopic.php?f=59&t=6612

Also,

Softcam Modification

You need to have working 00 and 01 Power Vu ECM keys for TP. You need to write service id for every channel but in the old Power Vu way. If service id is 1025 , you need to write as 0251. Every sat/ TP will need to have a different 4 number sequential code 0001, 0002, 0003 etc.

P 00010251 00 xxxxxxxxxxxxxxxx ; Ant 3, 19.2e
P 00010251 01 xxxxxxxxxxxxxxxx ; Ant 3, 19.2e

P= Power Vu
0001= First satellite/ TP in the softcam file
0251= Service id (modified as mentioned before)
00, 01
xxxxxxxxxxxxxxxx= Power vU ecm KEYS
Channel Name and Sat location

Biss

F 00011FFF 00000000 XXXXXXXXXXXXXXXX ; Channel Name (105.0e)
F= Biss
0001= Service id (sid)
1FFF= Biss ecm
00000000= Hash autofill
XXXXXXXXXXXXXXXX- Biss Key
Channel Name (105.0e)= Optional

[Endri8899]

Gtmedia v9 super When i import,import failed,what i can do?

[cpr43]

Gtmedia v9 super When i import,import failed,what i can do?

Make sure it is Softcam.key

[Endri8899]

Create in text format Softcam.key?

[cpr43]

Create in text format Softcam.key?

Unrar this file. Use the Softcam.Key file inside as a template. When you finish adding your keys SAVE AS over the existing file.

[Endri8899]

Thank you so much I add,same can i add and biss, tanberg etc? And gtmedia v9 super have only 5 lines cccam?

[cpr43]

Thank you so much I add,same can i add and biss, tanberg etc? And gtmedia v9 super have only 5 lines cccam?

Yes, same way.

[Endri8899]

When I add biss key in gtmedia v9 super,reciver restarted and need Rom.abs ,please give me format for biss key for add?

[cpr43]

Biss

F 00011FFF 00000000 XXXXXXXXXXXXXXXX ; Channel Name (105.0e)
F= Biss
0001= Service id (sid)
1FFF= Biss ecm
00000000= Hash autofill
XXXXXXXXXXXXXXXX- Biss Key
Channel Name (105.0e)= Optional

[Endri8899]

I go to the Biss I import your formatBiss key, again empty,and MGCAMD Biss When I push, restart my GTMedia receiver,what can i do? please
F 00011FFF 00000000 XXXXXXXXXXXXXXXX ; Channel Name (105.0e)
F= Biss
0001= Service id (sid)
1FFF= Biss ecm
00000000= Hash autofill
XXXXXXXXXXXXXXXX- Biss Key
Channel Name (105.0e)= Optional

[palakanit]

Thanks for the detailed information

Hi,

I have GTMedua V9 Super and I installed GTMedia V9 Super Firmware (23/07/2019) in my device but the problem is am unable to save the PowerVue keys in it. ANy issue and solution to overcome from this perticular issue.

Hello

read here:

viewtopic.php?f=59&t=6612

Also,

Softcam Modification

You need to have working 00 and 01 Power Vu ECM keys for TP. You need to write service id for every channel but in the old Power Vu way. If service id is 1025 , you need to write as 0251. Every sat/ TP will need to have a different 4 number sequential code 0001, 0002, 0003 etc.

P 00010251 00 xxxxxxxxxxxxxxxx ; Ant 3, 19.2e
P 00010251 01 xxxxxxxxxxxxxxxx ; Ant 3, 19.2e

P= Power Vu
0001= First satellite/ TP in the softcam file
0251= Service id (modified as mentioned before)
00, 01
xxxxxxxxxxxxxxxx= Power vU ecm KEYS
Channel Name and Sat location

Biss

F 00011FFF 00000000 XXXXXXXXXXXXXXXX ; Channel Name (105.0e)
F= Biss
0001= Service id (sid)
1FFF= Biss ecm
00000000= Hash autofill
XXXXXXXXXXXXXXXX- Biss Key
Channel Name (105.0e)= Optional