Page 1 of 1

GT Media V9 Super - V9SA1905 - Cccam/newcamd problem

Posted: Sat Sep 14, 2019 8:34 am
by djamtas
Hi
I have a GT Media V9 super and i am am having problem with cccam or newcamd. it open only caid 0500 and all caid 0100 channels does not open.
can someone help me, i have tried all firmware but the problem still same.
NOTE: on GT Media v8 Nova it works fine and all channels open

Re: GT Media V9 Super - V9SA1905 - Cccam/newcamd problem

Posted: Sun Sep 15, 2019 12:13 pm
by Klakier1966
V9 nie jest super, jest bezużyteczny i nie ma wsparcia dla niego.
V9 is not great, it is useless and there is no support for it.

Re: GT Media V9 Super - V9SA1905 - Cccam/newcamd problem

Posted: Sat Sep 21, 2019 4:58 pm
by espargal
Eu tenho o mesmo problema já fiz de tudo e ela bloqueia em cccam , tenho a V7 trabalha bem com as mesmas flores, minha V9 vem com defeito não devolvi porque fica caro em portes e 1 mes de espera, simplesmente a V9 não vou mais repetir a compra :(

Re: GT Media V9 Super - V9SA1905 - Cccam/newcamd problem

Posted: Sat Sep 21, 2019 5:01 pm
by espargal
djamtas wrote:
Sat Sep 14, 2019 8:34 am
Hi
I have a GT Media V9 super and i am am having problem with cccam or newcamd. it open only caid 0500 and all caid 0100 channels does not open.
can someone help me, i have tried all firmware but the problem still same.
NOTE: on GT Media v8 Nova it works fine and all channels open
Tenho o mesmo problema ela bloqueia talvez seja do mesmo lote de fabrico com defeito :cry:

Re: GT Media V9 Super - V9SA1905 - Cccam/newcamd problem

Posted: Thu Sep 26, 2019 2:18 am
by Heortiz
Tengo un GT MEDIA V9 nuevo que me llego esta semana. No lo puedo configurar. Primero me sale solo unas regiones, como Argentina. Imposible de actualizar el firmware por medio de internet. Donde puedo obtener el link o archivo con firmware.
Otra cosa, no me permite escribir los transponder, solamente escoger algunos pre-establecidos que trae la unidad.

I got a new GT MEDIA V9 that arrived this week. I can not configure it, it shows only a few regions like argentina and brazil and some other few countries from Europe. Imposible to add the firmaware from via internet. Where can I get the latest firmware for V9? Another think, I tried to add Amazone 61.0 and it does not allow me to type the Transponder frecuency, speed or polarity...it is a pain for me because the unit only allow me to select a pre establish numbers. I already reset it the unit to factory and still does not work.
thanks,
Harold Ortiz
Costa Rica

Re: GT Media V9 Super - V9SA1905 - Cccam/newcamd problem

Posted: Mon Sep 30, 2019 7:08 pm
by Ricardof
En mi caso es que no puedo agregar las llaves biss ni powervu para el hispasat, sera que algo no estoy haciendo bien. Alguien me ayuda x favor.

Re: GT Media V9 Super - V9SA1905 - Cccam/newcamd problem

Posted: Mon Sep 30, 2019 8:26 pm
by cpr43
Ricardof wrote:
Mon Sep 30, 2019 7:08 pm
En mi caso es que no puedo agregar las llaves biss ni powervu para el hispasat, sera que algo no estoy haciendo bien. Alguien me ayuda x favor.
viewtopic.php?f=59&t=6612

IKS

Posted: Mon Sep 30, 2019 11:54 pm
by 00698Herre
amigos ayuda, como ingreso cuentas IKS en el gt medi v9, gracias por su ayuda.

Re: IKS

Posted: Tue Oct 01, 2019 12:02 am
by cpr43
00698Herre wrote:
Mon Sep 30, 2019 11:54 pm
amigos ayuda, como ingreso cuentas IKS en el gt medi v9, gracias por su ayuda.
Has una busqueda en youtube, hay muchos tutoriales

Code: Select all

https://www.youtube.com/watch?v=_2tyqrc-xSg

Re: GT Media V9 Super - V9SA1905 - Cccam/newcamd problem

Posted: Tue Oct 01, 2019 7:06 pm
by mahery
hello
I tried this but it gives nothing
I have not found a solution too

Code: Select all

http://www.streamboard.tv/oscam/wiki/CardsList

Re: GT Media V9 Super - V9SA1905 - Cccam/newcamd problem

Posted: Sun Oct 13, 2019 8:42 am
by djamtas
It does not work even with the new firmware. I wasted money buying this box thinking it is better than others.

I am very dissapointed by GTmedia for not able to solve this problem

Re: GT Media V9 Super - V9SA1905 - Cccam/newcamd problem

Posted: Fri Oct 18, 2019 7:49 pm
by Danny
I confirmed this problem. May be the problème is the version of OSCAM used in the box. I would remake firmware and extract code from V8 but I don't know how to do this.