Edit Tp question

[cdaw]

I couldn't find satelite list from 61w to 133w. I have to add Tp myself. I don't understand what is "PLSN" and "PLSN number " mean.
from lyngsat, Tp3860 V SR-FEC SID-VPID 30000-8/9, i Don't know where to put them? anybody know how to do this. thanks
also some tp has signal, some not, tp 3740, tp 3790 has signal, 3860 has not signal

[corvus]

just don't touch the plsn option

[cdaw]

thanks,maybe those channel don't exist.

[STRETCH]

Are the channels that you require on (AMC 11) 131W, if so 3740h 30000 is in (Digicipher), 3790v not listed, 3860v 30000 is in (Powervu).
The size of dish could be up towards 125cm, the info is on (lyngsat). Can you give us members some more info towards what channels you hope to receive and from what satellites, then we should be able to confirm what settings you should have in your receiver etc.
Hope this helps.

Den

[cdaw]

thanks for reply. my dish is face to 133 w now. it is 10 feet mesh one, I don't get signal from digicipher. I am new, I don't know which one can I get.
at 3740 v /31250, 3780v/31250 , and 3900v/31250 I get ch1,ch2,ch3,ch4, at 4020v/29270 , I get all channel as lyngsat listed at 3860v/30000, 3980v/30000, 4060v/30000 etc.

[juan_vale]

It will be easier to tell you which encryption systems your box can decode, they are Powervue, Tandberg and Biss, as long as you have the corresponding code for the channel. Your box can work with some of the other encryption's but you will need a pay service and connect to a server to make it function, that is what is called IKS or Cccam.

On 133w you most probably will find only two transponders will open, 4020V and 4166V. You will have more selection if you move your antenna to G14 (125w), which has most of what you get on 133w less the Fox News channels.

Make a couple more posts to get to the 10 post level and you will get a lot of help setting up your softcam file. Good luck.

[cdaw]

thanks, I have moved to 125w. may I ask for any key to try may lovely box. thanks

dvb s2 is newer than Digicipher. I can see dvb s2 channel but not Digicipher

[STRETCH]

Just had a look on (Lyngsat) have found the following which are ALL (Powervu) on 125W, there may be keys available.
Transponders as follows, 3780V 30000 / 3790H 13200 / 3820V 30000 / 3900V 29079 / 3960H 29270 / 4080H 30000 / 4120H 30000 / 4160H 30000.
You may be able to receive all transponders, just do a scan of each transponder and see what you can receive in your area, than delete what you do not require. When you have got your ten posts put your request in for the (softcam) for North America.

All the best Den

[juan_vale]

DVB-S and DVB-S2 is the system, like AM and FM on your radio, each system is capable of using the different encryption systems, Digicipher is NOT one of the systems your box is able to decode, so forget about any transponder that uses that type of encryption. In my earlier post I mentioned the encryptions your box can work with.

I have sent you a PM to help you get started on 125w, when you get the full list from @james007 you will find more. Good luck...

[cdaw]

thanks for help.