Page 1 of 1
GTMEDIA V9 SUPER - Rebooting
Posted: Sun Aug 09, 2020 6:48 am
by dushan
Continue rebooting when I connect my GTMEDIA V9 SUPER wi-fi and cccam. How to solve this problem ?.
Significant 07-17 updates have also been made. I tried cccam from a few people. After a while the problem reappears.
Re: GTMEDIA V9 SUPER - Rebooting
Posted: Sun Aug 09, 2020 11:28 am
by alex.c
please PM your cccam account, I will check it.
Thank you.
Re: GTMEDIA V9 SUPER - Rebooting
Posted: Sun Aug 09, 2020 6:04 pm
by weerakoon
My STB came with firmware 373, but not connect youtube, so I updated your latest firmware 398.now youtube network error ok. Now my new problem is when connect with cccam server Continue rebooting Stb.I tested over 5 cccam server,error is same,but connect with 373 not found such a error.Please Give me a solution.thank you.
Re: GTMEDIA V9 SUPER - Rebooting
Posted: Mon Aug 10, 2020 1:29 am
by alex.c
weerakoon wrote: ↑Sun Aug 09, 2020 6:04 pm
My STB came with firmware 373, but not connect youtube, so I updated your latest firmware 398.now youtube network error ok. Now my new problem is when connect with cccam server Continue rebooting Stb.I tested over 5 cccam server,error is same,but connect with 373 not found such a error.Please Give me a solution.thank you.
please send me your cccam account, then I can fix it. thankyou.
Re: GTMEDIA V9 SUPER - Rebooting
Posted: Mon Aug 10, 2020 3:06 am
by weerakoon
C: cccamboss.com 16000 0751462 5134679
(you can get free test line above server)
Re: GTMEDIA V9 SUPER - Rebooting
Posted: Mon Aug 10, 2020 7:17 am
by alex.c
weerakoon wrote: ↑Mon Aug 10, 2020 3:06 am
C: cccamboss.com 16000 0751462 5134679
(you can get free test line above server)
Hi, if I just stay in the menu, don't watch any program.
Will this issue happen?
Re: GTMEDIA V9 SUPER - Rebooting
Posted: Mon Aug 10, 2020 8:33 am
by weerakoon
This happens after connected cccam and select another scramble channel not related to ccam server.If suddenly selected a FTA one not reboot.
Re: GTMEDIA V9 SUPER - Rebooting
Posted: Mon Aug 10, 2020 10:50 am
by Lining
dushan wrote: ↑Sun Aug 09, 2020 6:48 am
Continue rebooting when I connect my GTMEDIA V9 SUPER wi-fi and cccam. How to solve this problem ?. 
Significant 07-17 updates have also been made. I tried cccam from a few people. After a while the problem reappears.
Would you take a version message for me to see? Is your WIFI MAC display normal, can you record the TS stream to me?
Re: GTMEDIA V9 SUPER - Rebooting
Posted: Tue Aug 11, 2020 6:09 am
by 007jb
El problema del reinicio se debe a exceso de temperatura del modulo wifi.El 398 parece que lo fuerza un poco.
Solucion ,poner activa una sola cccam y ventilacion usb añadida al V9 para su refrigeración.
Yo lo solucione así.
Re: GTMEDIA V9 SUPER - Rebooting
Posted: Wed Aug 12, 2020 1:51 am
by ahaqwxl001
when I switch to the programs of Irdeto ,the 9 super will reboot again and again.Could you please fix this bug?
Re: GTMEDIA V9 SUPER - Rebooting
Posted: Tue Sep 01, 2020 2:55 pm
by MarcoMart
I do have the same problem, it seems when a channel uses irdeto 2 the box keeps booting in loop.
Re: GTMEDIA V9 SUPER - Rebooting
Posted: Wed Sep 02, 2020 5:50 am
by alex.c
We will release new firmware to fix this issue when watch irdeto channel by cccam.
Re: GTMEDIA V9 SUPER - Rebooting
Posted: Wed Sep 02, 2020 2:45 pm
by cpr43
alex.c wrote: ↑Wed Sep 02, 2020 5:50 am
We will release new firmware to fix this issue when watch irdeto channel by cccam.
Alex
please go over the GTMEDIA_V9 Series Bug Tracking System! post and see which one can be work out. Thanks
viewtopic.php?f=57&t=19029
Re: GTMEDIA V9 SUPER - Rebooting
Posted: Wed Sep 02, 2020 2:49 pm
by alex.c
cpr43 wrote: ↑Wed Sep 02, 2020 2:45 pm
alex.c wrote: ↑Wed Sep 02, 2020 5:50 am
We will release new firmware to fix this issue when watch irdeto channel by cccam.
Alex
please go over the GTMEDIA_V9 Series Bug Tracking System! post and see which one can be work out. Thanks
viewtopic.php?f=57&t=19029
OK, will check if we can fix some of them.
Thanks.
Re: GTMEDIA V9 SUPER - Rebooting
Posted: Wed Sep 09, 2020 12:13 pm
by guenni
Hello, I have the same problem. My V9 TV receiver boots when switching within the encrypted channels. Is there already a new firmware that solves this problem? thank you
Re: GTMEDIA V9 SUPER - Rebooting
Posted: Fri Sep 11, 2020 10:12 am
by Usiek
Same problem on V9 and V8 Super
Re: GTMEDIA V9 SUPER - Rebooting
Posted: Wed Sep 16, 2020 8:36 am
by guenni
alex.c wrote: ↑Wed Sep 02, 2020 2:49 pm
cpr43 wrote: ↑Wed Sep 02, 2020 2:45 pm
alex.c wrote: ↑Wed Sep 02, 2020 5:50 am
We will release new firmware to fix this issue when watch irdeto channel by cccam.
Alex
please go over the GTMEDIA_V9 Series Bug Tracking System! post and see which one can be work out. Thanks
viewtopic.php?f=57&t=19029
OK, will check if we can fix some of them.
Thanks.
Hello, do you have any news about the Rebooting Problem V9????
Re: GTMEDIA V9 SUPER - Rebooting
Posted: Sun Nov 22, 2020 9:01 am
by 2910
Hello, on 18.11. about 28 programs were added on the 23.5 ° East satellite within Skylink. All programs are coded by Irdeto, Viacess and V9 restarts around again. These programs are on the frequencies 12012 V, 11953 H, 12110 H speed is 29900. If you change to a program on another transponder, then V9 goes OK.
Re: GTMEDIA V9 SUPER - Rebooting
Posted: Mon Nov 23, 2020 6:16 am
by Tom.w
2910 wrote: ↑Sun Nov 22, 2020 9:01 am
Hello, on 18.11. about 28 programs were added on the 23.5 ° East satellite within Skylink. All programs are coded by Irdeto, Viacess and V9 restarts around again. These programs are on the frequencies 12012 V, 11953 H, 12110 H speed is 29900. If you change to a program on another transponder, then V9 goes OK.
hello
can you please help me record the frequency 12012 V29900 data, then send it to me with
https://wetransfer.com/.
we will check it
Re: GTMEDIA V9 SUPER - Rebooting
Posted: Mon Nov 23, 2020 6:20 am
by Tom.w
2910 wrote: ↑Sun Nov 22, 2020 9:01 am
Hello, on 18.11. about 28 programs were added on the 23.5 ° East satellite within Skylink. All programs are coded by Irdeto, Viacess and V9 restarts around again. These programs are on the frequencies 12012 V, 11953 H, 12110 H speed is 29900. If you change to a program on another transponder, then V9 goes OK.
hello
did you update the newest firmware v400 from
viewtopic.php?f=59&t=6522(GTMedia_V9Sup ... _V400.zip).
if not,please update the v400 firmware,then test it with Irdeto channels.
Re: GTMEDIA V9 SUPER - Rebooting
Posted: Mon Nov 23, 2020 6:40 pm
by 2910
The frequencies are 12012, 11953 and 12110 . I have fw 398. I'll try to give 400. The only problem is that then I have to retune all the satellites.
Re: GTMEDIA V9 SUPER - Rebooting
Posted: Tue Nov 24, 2020 12:40 pm
by STRETCH
Save your (system data) to a usb, update, then reinput you (data) back into the receiver.
Den
Re: GTMEDIA V9 SUPER - Rebooting
Posted: Wed Nov 25, 2020 8:06 am
by 2910
STRETCH wrote: ↑Tue Nov 24, 2020 12:40 pm
Save your (system data) to a usb, update, then reinput you (data) back into the receiver.
Den
Then why does invalid write? Advise on how to upload programs from USB. I also have them stored on my PC. Well thank you.
Re: GTMEDIA V9 SUPER - Rebooting
Posted: Sat Nov 28, 2020 7:54 pm
by 2910
2910 wrote: ↑Wed Nov 25, 2020 8:06 am
STRETCH wrote: ↑Tue Nov 24, 2020 12:40 pm
Save your (system data) to a usb, update, then reinput you (data) back into the receiver.
Den
Then why does invalid write? Advise on how to upload programs from USB. I also have them stored on my PC. Well thank you.
It helped that I had it stored on my PC, I opened it via an editor, made two changes and sent it back to USB. Then I inserted USB into GT Media V9 Super and uploaded my channels. So that's probably how to get the setting into the V9 Super.