v9 bloqueado

GTMEDIA V9 super V9Prime

Moderators: admin, GTMedia Team

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: v9 bloqueado

Post by Feralkiwi »

Yes I found with the V8 UHD unit that if you repeat press the power button as you power on, you enter the UP9 screen.

Most GT Media remotes you can open using your two thumb nails along the crack.
Check for screw in the battery area first.

Then you can look at the power button.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

lordnigh
Posts: 22
Joined: Fri Nov 01, 2019 10:26 pm

Re: v9 bloqueado

Post by lordnigh »

Buenas a mi me pasa algo similar y ya no se que hacerle
Tengo un V9 Super, y me ha funcionado bien desde que lo compre, hasta que un dia se quedo en negro la pantalla con únicamente la luz verde del deco.
He intentado poner rom.abs, la v400, la v399, la force 275 y en ningún caso consigo que aparezca la pantalla azul.
Le he desconectado la red y la antena, solo tengo la alimentación y el hdmi.
He probado a pulsar menú, el power off y el botón blanco que se ilumina cuando pulsas cualquiera que son los tres que he leído en todos los hilos que se supone que van , pero a mi no me van.
Estoy pulsándolos rápidamente durante unos 30s mas o menos y en ningún caso me aparece el boot en el deco o algo en la pantalla, el hdmi esta muerto sin señal.

¿Que puedo hacer aparte de tirar el deco?

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: v9 bloqueado

Post by Feralkiwi »

lordnigh wrote:
Sat Nov 06, 2021 10:15 pm
Buenas a mi me pasa algo similar y ya no se que hacerle
Tengo un V9 Super, y me ha funcionado bien desde que lo compre, hasta que un dia se quedo en negro la pantalla con únicamente la luz verde del deco.
He intentado poner rom.abs, la v400, la v399, la force 275 y en ningún caso consigo que aparezca la pantalla azul.
Le he desconectado la red y la antena, solo tengo la alimentación y el hdmi.
He probado a pulsar menú, el power off y el botón blanco que se ilumina cuando pulsas cualquiera que son los tres que he leído en todos los hilos que se supone que van , pero a mi no me van.
Estoy pulsándolos rápidamente durante unos 30s mas o menos y en ningún caso me aparece el boot en el deco o algo en la pantalla, el hdmi esta muerto sin señal.

¿Que puedo hacer aparte de tirar el deco?
You need to try a forced recovery.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

lordnigh
Posts: 22
Joined: Fri Nov 01, 2019 10:26 pm

Re: v9 bloqueado

Post by lordnigh »

Como decia ya he intentado con el ficher que se recomenda en ese hilo 275 forced.

¿Es necesario cambiar el nombre del archivo a flash.abs o algo asi? Por que dejando como vienen en los hilos no pone nada el deco, ni boot, ni on ni nada solo la luz verde

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: v9 bloqueado

Post by Feralkiwi »

As you do the recovery, you need to repeat press the button, that is press, release, press again and again, not hold it down continuously as the instructions say.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

lordnigh
Posts: 22
Joined: Fri Nov 01, 2019 10:26 pm

Re: v9 bloqueado

Post by lordnigh »

Pulso repetidamente y sin parar menu durante 30 seg y no aparece ninguna pantalla azul, tambien he probado a realizar lo mismo con los botones power off y boton blanco de remote.
¿hay que poner algun nombre especifico al archivo?
He probado con un pendrive de 128Gb y otro de 32Gb. ¿Influye que tengan mas archivos? ambos pendrive los tengo en FAT32

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: v9 bloqueado

Post by Feralkiwi »

Yes I had too many files on the USB for my UHD unit to show more than about 32.
Move the excess files into a folder and try again.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

lordnigh
Posts: 22
Joined: Fri Nov 01, 2019 10:26 pm

Re: v9 bloqueado

Post by lordnigh »

Finalmente despues de probar con 3 pendrive y vaciarlos, no era por los ficheros,
me di cuenta que la luz verde parpadeaba, cambie el cargador con otro de 12v 1.5A que tenia y se encendio y ya ponia boot y seguia la secuencia de arranque, tengo que actualizar firmware pero parece que ahora si va.

Google translate for other:
Finally after trying with 3 pendrives and emptying them, it was not because of the files,
I realized that the green light was flashing, I changed the charger with another one of 12v 1.5A that it had and it turned on and it already put boot and followed the boot sequence, I have to update firmware but it seems that now it does.

Post Reply

Return to “GTMEDIA V9 SERIES”