GTMEDIA Forum

Posted: **Thu Mar 10, 2022 12:28 pm**

Tips for up9 on V8UHD V9 Prime and V9 Super:
1: Try the USB forced button upgrade, whether the box can start normally
V8UHD software download address:
viewtopic.php?f=40&t=19117
V9 Prime and V9 Super software download address:
viewforum.php?f=59
The download address of the USB mandatory upgrade guide:
viewtopic.php?f=67&t=14431
2: If the forced button upgrade does not work and is still within the warranty period, please contact the seller for processing. If it is no longer within the warranty period, you can consider using the serial port rs232 upgrade
Serial port brushing instructions and tools download:
viewtopic.php?f=51&t=20721
3: If none of the above methods work, you can consider soldering the flash down, use the flash writer to program the program, and then solder the flash back to the board.
4: If the SN number displayed is XXXXX after the software is up, and the SN number displayed is XXXXX, please tell us the original SN number of the box, and we will provide the software to burn the SN number.

Posted: **Sun Oct 09, 2022 3:40 pm**

Hey!
is there as ETA for the Mars firmware for v9prime? Is it soon as in a couple of days or soon as in a couple of months? I wouldn't mind testing beta firmware.
all the best!

Posted: **Wed Oct 26, 2022 4:42 pm**

Lining wrote: ↑
Thu Mar 10, 2022 12:28 pm
Tips for up9 on V8UHD V9 Prime and V9 Super:
1: Try the USB forced button upgrade, whether the box can start normally

This procedure allow to downgrade from Mars to old firmware?

PS. From Mars fw the procedure to UP9 seems don't work!

Don't appear the "UP9", the receiver start normally.

Thank you, regards.

Posted: **Mon Nov 07, 2022 12:02 pm**

Lining wrote: ↑
Thu Mar 10, 2022 12:28 pm
Tips for up9 on V8UHD V9 Prime and V9 Super:
1: Try the USB forced button upgrade, whether the box can start normally
V8UHD software download address:
viewtopic.php?f=40&t=19117
V9 Prime and V9 Super software download address:
viewforum.php?f=59
The download address of the USB mandatory upgrade guide:
viewtopic.php?f=67&t=14431
2: If the forced button upgrade does not work and is still within the warranty period, please contact the seller for processing. If it is no longer within the warranty period, you can consider using the serial port rs232 upgrade
Serial port brushing instructions and tools download:
viewtopic.php?f=51&t=20721
3: If none of the above methods work, you can consider soldering the flash down, use the flash writer to program the program, and then solder the flash back to the board.
4: If the SN number displayed is XXXXX after the software is up, and the SN number displayed is XXXXX, please tell us the original SN number of the box, and we will provide the software to burn the SN number.

Tengo un V9 Super en boot y es imposible recuperarlo , lo quiero intentar con el programa de flasheo del V8UHD por rs232 , pero no funciona en V9 Super, pueden mandar o reparar dicho software para que sea compatible con V9 Super?

Posted: **Thu Nov 10, 2022 6:06 pm**

DefenseV9Super wrote: ↑
Mon Nov 07, 2022 12:02 pm

Lining wrote: ↑
Thu Mar 10, 2022 12:28 pm
Tips for up9 on V8UHD V9 Prime and V9 Super:
1: Try the USB forced button upgrade, whether the box can start normally
V8UHD software download address:
viewtopic.php?f=40&t=19117
V9 Prime and V9 Super software download address:
viewforum.php?f=59
The download address of the USB mandatory upgrade guide:
viewtopic.php?f=67&t=14431
2: If the forced button upgrade does not work and is still within the warranty period, please contact the seller for processing. If it is no longer within the warranty period, you can consider using the serial port rs232 upgrade
Serial port brushing instructions and tools download:
viewtopic.php?f=51&t=20721
3: If none of the above methods work, you can consider soldering the flash down, use the flash writer to program the program, and then solder the flash back to the board.
4: If the SN number displayed is XXXXX after the software is up, and the SN number displayed is XXXXX, please tell us the original SN number of the box, and we will provide the software to burn the SN number.
Tengo un V9 Super en boot y es imposible recuperarlo , lo quiero intentar con el programa de flasheo del V8UHD por rs232 , pero no funciona en V9 Super, pueden mandar o reparar dicho software para que sea compatible con V9 Super?

Hay varios topicos. leelos , algunos les ha trabajado un procedimiento, a otros de lo contrario otros. Tambien trata de usar archivos bin antiguos. Aca te dejo links:

Code: Select all