Encryption change on 133 West?
Moderators: admin, GTMedia Team
-
- Posts: 19
- Joined: Tue Mar 03, 2020 6:45 am
Encryption change on 133 West?
Does anybody know if the encryption changed on 4020 V @133 west (transponder 16)? I have a really good signal, but earlier this week something changed. Still show up as PV. I have unplugged my receiver and plugged it back in. Turned it off and back on. So far, no luck. I am going through serious AEW withdrawal on Wednesday nights. LOL
Thank you in advance!
Thank you in advance!
Re: Encryption change on 133 West?
all on 4020 V working here OK on a V8X receiver ,just checked
-
- Posts: 19
- Joined: Tue Mar 03, 2020 6:45 am
Re: Encryption change on 133 West?
Is it viewable or scrambled? I'm not getting it on GTMedia V9 Prime anymore.
Re: Encryption change on 133 West?
Have you tried a rescan of the transponder.
Den
Den
Re: Encryption change on 133 West?
viewable /// no problems
-
- Posts: 19
- Joined: Tue Mar 03, 2020 6:45 am
Re: Encryption change on 133 West?
Okay, this is strange, but it comes in on my V8 Nova Blue with no problems. However, my v9 Prime is not allowing me to view it. I am going to re-install the firmware on the V9 Prime to see if that fixes the issue. Stay tuned...
-
- Posts: 19
- Joined: Tue Mar 03, 2020 6:45 am
Re: Encryption change on 133 West?
Well, no change after I re-installed the firmware. Strange.... Anyone else got any suggestions or fixes?
Re: Encryption change on 133 West?
Bump. I'm having the same problem on the same transponder. (same receiver)
-
- Posts: 19
- Joined: Tue Mar 03, 2020 6:45 am
Re: Encryption change on 133 West?
I don't know who to ask exactly, but could the "powers that be" please look into this? I'm just not understanding why an older receiver can decrypt these channels when a newer one cannot when it used to. I have had the transponder/channels on the receiver for hours at a time and it still will not let me view the channels. Thank you in advance.
Re: Encryption change on 133 West?
Have you deleted the channel and rescanned to update any changes?
Or set up another sat and scan it there to test.
I had some issues with the frequency change for BBC on 166e.
I think the EMM key in the software may have a frequency list and does not apply to the changed frequency.
Did get a roll, but can be difficult and often just shows pink bricks.
Owen
Or set up another sat and scan it there to test.
I had some issues with the frequency change for BBC on 166e.
I think the EMM key in the software may have a frequency list and does not apply to the changed frequency.
Did get a roll, but can be difficult and often just shows pink bricks.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- Posts: 19
- Joined: Tue Mar 03, 2020 6:45 am
Re: Encryption change on 133 West?
Yeah, I tried that step too. It's not changing anything. "Scrambled" keeps flashing on the black screen, but no viewable images or audio.
Re: Encryption change on 133 West?
The important thing is to know the CAID of the channels
In some channels with three CAIDs I get that one connects but does not broadcast, since the other two CAIDs do not have the screen remains black and without sound
In some channels with three CAIDs I get that one connects but does not broadcast, since the other two CAIDs do not have the screen remains black and without sound