Page 1 of 1
Restaurar para V9 Prime 1.84
Posted: Sun Jan 08, 2023 2:19 pm
by bruno.vailante
Atualizei meu V9 Prime para a versão "Mars" e o IKS no 70w não está funciona nesta versão e agora não estou conseguindo voltar para a versão V9 Prime 1.84. Alguém sabe alguma solução?
Re: V9 Prime Mars para V9 Prime 1.84
Posted: Sun Jan 08, 2023 4:54 pm
by CAJE
The IKS works, it all depends on the channels you want to see if it has coverage
Re: V9 Prime Mars para V9 Prime 1.84
Posted: Wed Jan 11, 2023 8:33 am
by bruno.vailante
70W funciona?
Aqui não está funcionando!
Re: Restaurar para V9 Prime 1.84
Posted: Thu Feb 02, 2023 11:28 pm
by Jordaniell2
Olá, fiz a mesma coisa e a única solução é regravar a epron com a versão 175 , só aí então você vai recuperar seu receptor.
Re: Restaurar para V9 Prime 1.84
Posted: Sat Feb 25, 2023 11:02 pm
by lzp
Jordaniell2 wrote: ↑Thu Feb 02, 2023 11:28 pm
Olá, fiz a mesma coisa e a única solução é regravar a epron com a versão 175 , só aí então você vai recuperar seu receptor.
.
Boa noite
Como regravar a "Epron" ?
Re: V9 Prime Mars para V9 Prime 1.84
Posted: Sat Feb 25, 2023 11:27 pm
by cpr43
bruno.vailante wrote: ↑Wed Jan 11, 2023 8:33 am
70W funciona?
Aqui não está funcionando!
You load Mars FW and buy Global CCcam lines. 70w is working perfect- Brasil and America Region
Re: Restaurar para V9 Prime 1.84
Posted: Sun Feb 26, 2023 12:04 am
by lzp
Jordaniell2 wrote: ↑Thu Feb 02, 2023 11:28 pm
Olá, fiz a mesma coisa e a única solução é regravar a epron com a versão 175 , só aí então você vai recuperar seu receptor.
.
Boa noite.
Veja isto:
Re: Restaurar para V9 Prime 1.84
Posted: Tue Feb 28, 2023 12:40 am
by lzp
lzp wrote: ↑Sun Feb 26, 2023 12:04 am
Jordaniell2 wrote: ↑Thu Feb 02, 2023 11:28 pm
Olá, fiz a mesma coisa e a única solução é regravar a epron com a versão 175 , só aí então você vai recuperar seu receptor.
.
Boa noite.
Veja isto:
Renomear a firmware que deseja instalar para
Flash.bin
boot pelo controle remoto
Re: Restaurar para V9 Prime 1.84
Posted: Mon Mar 13, 2023 12:49 am
by joaquim B junior
Boa noite como eu faço para reset Gtmidia v9 prime
Re: Restaurar para V9 Prime 1.84
Posted: Wed Jun 28, 2023 1:35 am
by jpagan
Boa noite. Também não consigo mais restaurar para V9 Prime. Alguém pode ajudar. Não consigo usar o aparelho
Re: Restaurar para V9 Prime 1.84
Posted: Mon Jul 31, 2023 1:02 pm
by winet1978
I think it's absurd for the brand to offer an update, and then it doesn't offer a solution for the donwgrade. well, it wasn't the user of the device that made the software, he didn't insert a pirated version. if the brand does not have a solution, it is something regrettable and so that we can think about whether it really pays to bet on the brand again.
Re: Restaurar para V9 Prime 1.84
Posted: Sun Aug 27, 2023 8:38 pm
by pelaez501
hola necesito ayuda, tengo que retaurar v9 prime para poder meter ecam y me han pasado el refresh tool v2.2
siguiendo los pasos y con un cable segun peticion usb-jack me ocurre algo muy raro, os paso una imagen para que me podais ayudar porfa, saludos
Re: Restaurar para V9 Prime 1.84
Posted: Sun Aug 27, 2023 9:19 pm
by cpr43
pelaez501 wrote: ↑Sun Aug 27, 2023 8:38 pm
hola necesito ayuda, tengo que retaurar v9 prime para poder meter ecam y me han pasado el refresh tool v2.2
siguiendo los pasos y con un cable segun peticion usb-jack me ocurre algo muy raro, os paso una imagen para que me podais ayudar porfa, saludos
Tienes un USB insertado con el mismo archivo renombrado a flash.bin?
Re: Restaurar para V9 Prime 1.84
Posted: Sun Aug 27, 2023 11:46 pm
by CAJE
pelaez501 wrote: ↑Sun Aug 27, 2023 8:38 pm
hola necesito ayuda, tengo que retaurar v9 prime para poder meter ecam y me han pasado el refresh tool v2.2
siguiendo los pasos y con un cable segun peticion usb-jack me ocurre algo muy raro, os paso una imagen para que me podais ayudar porfa, saludos
Estás usando el programa incorrecto, debes usar
este
Re: Restaurar para V9 Prime 1.84
Posted: Sun Sep 24, 2023 10:29 am
by majka
How to connect GTmedia V9 PRIME cable Rs232 to the jack. There is no terminal in the receiver for Rs 232, only the input for the AV jack. A colleague uploaded bad software.
Re: Restaurar para V9 Prime 1.84
Posted: Sun Sep 24, 2023 12:49 pm
by CAJE
majka wrote: ↑Sun Sep 24, 2023 10:29 am
How to connect GTmedia V9 PRIME cable Rs232 to the jack. There is no terminal in the receiver for Rs 232, only the input for the AV jack. A colleague uploaded bad software.
It is done through a JST connector and not JACK
Re: Restaurar para V9 Prime 1.84
Posted: Tue Sep 26, 2023 12:52 pm
by winet1978
It's very complicated for the receiver to let Mars/Lacam be installed and then, if you want to return it, you have to go to a specialized technician. it's discouraging
Re: Restaurar para V9 Prime 1.84
Posted: Sat Sep 30, 2023 10:50 pm
by cpr43
winet1978 wrote: ↑Tue Sep 26, 2023 12:52 pm
It's very complicated for the receiver to let Mars/Lacam be installed and then, if you want to return it, you have to go to a specialized technician. it's discouraging
Stay with original firmware if so. Original FW still works fine
Read here:
viewtopic.php?f=47&t=28532
Re: Restaurar para V9 Prime 1.84
Posted: Mon Oct 02, 2023 7:57 pm
by winet1978
I don't think so, or I don't know if you're joking with the previous messages. After using Mars, there is no way to go back to the original firmware if you are unaware. the way it's easy using a pendrive can forget that it doesn't work.
cpr43 wrote: ↑Sat Sep 30, 2023 10:50 pm
winet1978 wrote: ↑Tue Sep 26, 2023 12:52 pm
It's very complicated for the receiver to let Mars/Lacam be installed and then, if you want to return it, you have to go to a specialized technician. it's discouraging
Stay with original firmware if so. Original FW still works fine
Read here:
viewtopic.php?f=47&t=28532
Re: Restaurar para V9 Prime 1.84
Posted: Thu Oct 05, 2023 12:28 am
by cpr43
winet1978 wrote: ↑Mon Oct 02, 2023 7:57 pm
I don't think so, or I don't know if you're joking with the previous messages. After using Mars, there is no way to go back to the original firmware if you are unaware. the way it's easy using a pendrive can forget that it doesn't work.
cpr43 wrote: ↑Sat Sep 30, 2023 10:50 pm
winet1978 wrote: ↑Tue Sep 26, 2023 12:52 pm
It's very complicated for the receiver to let Mars/Lacam be installed and then, if you want to return it, you have to go to a specialized technician. it's discouraging
Stay with original firmware if so. Original FW still works fine
Read here:
viewtopic.php?f=47&t=28532
You are not alone. Others same as you didnt read and updated to Mars. Others same as you want to go back to original FW. They did struggle but went back using RS232. You should give it a try. Otherwise you will on Mars until GTmedia finds a USB process which they havent yet.
Re: Restaurar para V9 Prime 1.84
Posted: Thu Oct 05, 2023 11:54 am
by winet1978
Thank you for the answer, but the issue was not reading what could happen, but gtmedia not vehemently warning what could happen and not opening the doors of its product and then leaving its customers to have to do like xxxxxx
cpr43 wrote: ↑Thu Oct 05, 2023 12:28 am
winet1978 wrote: ↑Mon Oct 02, 2023 7:57 pm
I don't think so, or I don't know if you're joking with the previous messages. After using Mars, there is no way to go back to the original firmware if you are unaware. the way it's easy using a pendrive can forget that it doesn't work.
cpr43 wrote: ↑Sat Sep 30, 2023 10:50 pm
winet1978 wrote: ↑Tue Sep 26, 2023 12:52 pm
It's very complicated for the receiver to let Mars/Lacam be installed and then, if you want to return it, you have to go to a specialized technician. it's discouraging
Stay with original firmware if so. Original FW still works fine
Read here:
viewtopic.php?f=47&t=28532
You are not alone. Others same as you didnt read and updated to Mars. Others same as you want to go back to original FW. They did struggle but went back using RS232. You should give it a try. Otherwise you will on Mars until GTmedia finds a USB process which they havent yet.