Page 1 of 1

V9 Prime Mars frozen

Posted: Sun Mar 19, 2023 11:49 pm
by lokonai
Hi all

I have a V9 Prime with Mars firmware, working with Xstalker for IPTV, but it freezes plenty of times...most of times I want to change channel, it gets frozen and I have to take out the power and restart again...

Any help?? I know I cannot go back to original firmware now...but, any Mars firm older without this problem? I only want to use it for IPTV...

Re: V9 Prime Mars frozen

Posted: Mon Mar 20, 2023 4:50 am
by bambangy978
Go back to December firmware, it more stable for IPTV

Re: V9 Prime Mars frozen

Posted: Wed Nov 29, 2023 8:11 am
by toni1551
Mine is freezing also a lot with Latest mars firmware.

Does anyone else have this problem?

Watching normal satellite channels with Mars

Re: V9 Prime Mars frozen

Posted: Wed Nov 29, 2023 12:38 pm
by winet1978
The last two firmwares were a pity, I'll have to go back again to old versions, brand so far disappointing, because as we already know it has to be a genius to downgrade to the original version. That Mars sucks.

Re: V9 Prime Mars frozen

Posted: Sun Dec 03, 2023 10:38 am
by zilex
You dont need to be Genius to reinstal original firmware ,just not an idiot like me i was connecting pins 1 For Ground 3 for tx and 4 for RX instead of pin 5 for Ground 3 for RX and 2 for TX.I used a connector from an old Nvidia graphic cards for Dual fans which fits perfectly in the v9 Prime and an old ibm PC with xp and 2 com ports ,i also used connectors for power switch, restart and so on from an old pc to connect v9 prime straight to com port...Its pretty easy when you use your brain which i started using after few hours....
.
On their post for rs232 Pins for v9prime, TX and RX pins are 2 fo RX and 3 for TX on the COM port ,which didnt work for me i had to switch their places.