V9 Prime USB 3g configuration issue

[BEH]

When 3G USB is chosen in the network configuration, the USB modem connects and works fine, but when you turn the deco off and turn it on again, in the network configuration it remains "None". It seams that the V9 prime does not save this setting when pressing Exit on the remote.

[Feralkiwi]

If by turn off, you mean the power at the wall, try powering down to standby and back as that may save the option.

I had issues with the GT Combo android unit not staying on fix IP.
I found this would set fixed if I was on Wifi, not cable as I normally use.
So yes there are odd things in the network settings of these units.
Try also setting fixed IP and then also 3G.

Owen

[BEH]

Thanks for your feedback. After choosing USB 3g I just put the deco on standby using the power button on the remote control. And when I press the power button again, the network remains "None". I followed your tips but it didn't solve it.
This problem is also happening on my friend's deco V9 prime.
Has anyone else had this problem?