How to manually add BBC channels at 27.5W

[STRETCH]

Went back to the drawing board, using the same way as I did with the V8 NOVA ORANGE.
Softcam details I had on USB, with up to date keys for the said channels which I inserted.
Deleted 27.5w from my V8x receiver.
Found two biss channels on 30w with similar spec 10730h 27500 / 10770h 30000, did a (blind scan) to my V8x against 27.5w, then did a (back-up) of the (system data and channels).
With the db editor, click on 27.5w, this will bring up all channels scanned in from 30w onto 27.5w.
When using the (db editor) I found that some channels had a (ecm) of (3) and some with a (ecm) of (1).
I then deleted ALL CHANNELS apart from one of EACH, one of (ecm)(1) / one of (ecm)(3).
Then clicked on 27.5w again and added transponder details 11495v 44100.
Go back and click on the channel with the (ecm) of (3) and amend the details as follows.
Using BBC ONE (SD) as a example,
Name = BBC ONE SD/ v_pid = 101/ a_pid1 = 102/ a_type1 = MP2/ a_type2 = MP2/ p_pid = 101/ tv_flag = 1/ is_scramble = 1/ s_id = 4164/ ecm no = 3.
When you have done that click on the channel (then copy to transponder 11495v 44100)
BBC 2 / CBEEBIES / BBC 4 / BBC NEWS / CBBC / BBC PARLIAMENT / BBC RED BUTTON / BBC SCOTLAND / NTH IRELAND / WALES
Then go through this again for the rest of the SD channels (this time) only amend v_pid / a_pid1 / p_pid / s_id.
At this point click on 27.5w again and delete transponder 10770h 30000.
Then (SAVE) this information, GO TO THE (TOP LEFT OF THE db EDITOR) FILE / SAVE, a (ICON)should come up (save ok) CLICK (OK).
We now start to amend the details for the HD channels, click on 27.5w again, click on 10730h 27500 which should bring up the channel
with the (ecm) of (1).
Click on that channel and amend as before.
Using BBC ONE HD as a example,
Name = BBC ONE HD/ v_pid =6601/ a_pid1 = 6602/ a_type1 = AAC/ a_type2 = PCM/ p_pid = 6601/tv_flag = 1/is_scramble = 1/s_id 17540/ecm no = 1.
BBC TWO / ITV / CH 4 / CH 5 / CBBC / TBN UK
When you have done this, click on the channel (then copy to transponder 11495v44100)
Then go through this again for the rest of the HD channels (this time) only amend (v_pid/a_pid1/p_pid/s_id
There's just has to be one channel that has to be different (TBN UK) (a_type1 = AAC /a_type2 = MP2)
You can now delete transponder 10730h 27500. ALL CHANNELS SHOULD NOW BE ON 11495V 44100.
MAKE SURE TO SAVE(TOP LEFT OF THE db EDITOR) FILE/SAVE/CLICK ON (ICON OK)
BEFORE YOU UNDERTAKE THIS TASK(PRINT OFF) (HAVE A READ) AND DO A BACK-UP OF YOUR OWN CHANNEL LIST FIRST.
When you move from another satellite to go to 27.5w, you may have to power off/on with the remote to decode the channels,
after that, you can more from channel to channel with ease.
JUST DO ONE CHANNEL FIRST, IF THAT WORKS (YOU KNOW YOU HAVE GOT IT RIGHT(THEN CARRY ON)