Page 1 of 1

GT Media I-Fire FREEZING

Posted: Sat Apr 03, 2021 12:33 pm
by kokica90
Hello Everyone,

I have problem with I-fire box.
I bought about twenty of these boxes.
I use lists of about 300 channels and 1500 movies.
On certain channels it wants to block and will not continue, it must be turned off and plugged in and change the channel so as not to block again.
I tried over the stalker and over the xtream, the same thing happens.
I tried all the firmware from 2020 and the latest from 2021. the same thing is still happening.
Everything works normally on all other devices, I have no problem with channels, everything works great.
All channels are h264 (SD,HD,FHD)

Does anyone have a solution on how to fix this without blocking?

Thanks

Re: GT Media I-Fire FREEZING

Posted: Mon Apr 05, 2021 4:53 pm
by kokica90
Hello,

I found what the problem was.
This box blocks when you need to read the epg.
When you eject from these channels (from streams) the EPG, box no longer blocks.
Other devices easily open the EPG from those channels where the GT IFIRE is blocked.
I would ask GT MEDIA developers to try to correct the EPG reading, so that they do not have problems with blocking.

Thanks

Re: GT Media I-Fire FREEZING

Posted: Tue Apr 06, 2021 9:38 am
by Tom.w
kokica90 wrote:
Mon Apr 05, 2021 4:53 pm
Hello,

I found what the problem was.
This box blocks when you need to read the epg.
When you eject from these channels (from streams) the EPG, box no longer blocks.
Other devices easily open the EPG from those channels where the GT IFIRE is blocked.
I would ask GT MEDIA developers to try to correct the EPG reading, so that they do not have problems with blocking.

Thanks
hello
can you give the channel list to me,i will check the epg issue.