Hi, now I have problem with my second I-Fire2 decoder...
after hard reset from USB "flash", the device don't display noting on a TV.
It goes like that:
- USB in + MENU button, reset procedure is on,
- I see on TV "USB Upgrade! Do not power off!",
- after really short time the device resstart itself but after logo screen "GTMedia" it doesn't sent any video to the TV, like no input signal from the device.
Can it be somehow solved ?
IFIRE 2 - hard reset done, loader 100%, no signal from HDMI
Moderators: admin, GTMedia Team
Re: IFIRE 2 - hard reset done, loader 100%, no signal from HDMI
This may be an issue with PAL / NTSC.
The default after reset is PAL TV format.
I do not know if this works with the I-Fire.
Owen
The default after reset is PAL TV format.
I do not know if this works with the I-Fire.
Also if there is a TV Mode button on the remote try that to change the TV output format.Added fast key to switch video output mode or format.
we try to support some old TV or some signal mode TV
Press menu key to main menu.(Panel show "----")
press Green key to switch NTSC/PAL, the panel will show "PAL " or "NTSC"
Press Stop key to switch the video format
PAL mode : the panel will show "576I" -- "576P" -- "720P"(50HZ) --"1080I"(50HZ) --"1080P"(50HZ)
NTSC mode : the panel will show "480I" -- "480P" -- "720P"(60HZ) --"1080I"(60HZ) --"1080P"(60HZ)
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: IFIRE 2 - hard reset done, loader 100%, no signal from HDMI
It is a new TV LG 55" 4K, also on a second (2 years old ) TV I've the same issue.
One week ago I've make facotry reset in my previous IFIRE 2 device and it is working propertly. Two days ago on my second IFIRE# 2 device I was forced to do a factory reset (with the same system files "flash") and final result is lika I've mentioned upper... loader 100% and no signal from device to the TV (HDMI)
One week ago I've make facotry reset in my previous IFIRE 2 device and it is working propertly. Two days ago on my second IFIRE# 2 device I was forced to do a factory reset (with the same system files "flash") and final result is lika I've mentioned upper... loader 100% and no signal from device to the TV (HDMI)
Last edited by michbl1 on Wed Dec 29, 2021 10:01 am, edited 1 time in total.
Re: IFIRE 2 - hard reset done, loader 100%, no signal from HDMI
hello
Do you see the boot logo during the boot process?
Do you see the boot logo during the boot process?
Re: IFIRE 2 - hard reset done, loader 100%, no signal from HDMI
Yes I see
"USB Upgrade! Do not power off"
"USB Upgrade! Do not power off"
Re: IFIRE 2 - hard reset done, loader 100%, no signal from HDMI
Problem solved.
Ive used the oldest software which I've found on a forum, next I've upgraded it to the new one.
Ive used the oldest software which I've found on a forum, next I've upgraded it to the new one.