IFIRE 2 - hard reset done, loader 100%, no signal from HDMI

GTMEDIA I-FIRE-IPTV BOX/ I-FIRE2-IPTV BOX

Moderators: admin, GTMedia Team

Post Reply
michbl1
Posts: 15
Joined: Wed Dec 22, 2021 7:42 pm

IFIRE 2 - hard reset done, loader 100%, no signal from HDMI

Post by michbl1 »

Hi, now I have problem with my second I-Fire2 decoder...
after hard reset from USB "flash", the device don't display noting on a TV.
It goes like that:
- USB in + MENU button, reset procedure is on,
- I see on TV "USB Upgrade! Do not power off!",
- after really short time the device resstart itself but after logo screen "GTMedia" it doesn't sent any video to the TV, like no input signal from the device.

Can it be somehow solved ?

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: IFIRE 2 - hard reset done, loader 100%, no signal from HDMI

Post by Feralkiwi »

This may be an issue with PAL / NTSC.
The default after reset is PAL TV format.

I do not know if this works with the I-Fire.
Added fast key to switch video output mode or format.
we try to support some old TV or some signal mode TV
Press menu key to main menu.(Panel show "----")
press Green key to switch NTSC/PAL, the panel will show "PAL " or "NTSC"
Press Stop key to switch the video format
PAL mode : the panel will show "576I" -- "576P" -- "720P"(50HZ) --"1080I"(50HZ) --"1080P"(50HZ)
NTSC mode : the panel will show "480I" -- "480P" -- "720P"(60HZ) --"1080I"(60HZ) --"1080P"(60HZ)
Also if there is a TV Mode button on the remote try that to change the TV output format.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

michbl1
Posts: 15
Joined: Wed Dec 22, 2021 7:42 pm

Re: IFIRE 2 - hard reset done, loader 100%, no signal from HDMI

Post by michbl1 »

It is a new TV LG 55" 4K, also on a second (2 years old ) TV I've the same issue.

One week ago I've make facotry reset in my previous IFIRE 2 device and it is working propertly. Two days ago on my second IFIRE# 2 device I was forced to do a factory reset (with the same system files "flash") and final result is lika I've mentioned upper... loader 100% and no signal from device to the TV (HDMI)
Last edited by michbl1 on Wed Dec 29, 2021 10:01 am, edited 1 time in total.

User avatar
Tom.w
网站管理员
Posts: 1786
Joined: Mon Jul 27, 2020 3:58 am

Re: IFIRE 2 - hard reset done, loader 100%, no signal from HDMI

Post by Tom.w »

hello
Do you see the boot logo during the boot process?

michbl1
Posts: 15
Joined: Wed Dec 22, 2021 7:42 pm

Re: IFIRE 2 - hard reset done, loader 100%, no signal from HDMI

Post by michbl1 »

Yes I see
"USB Upgrade! Do not power off"

michbl1
Posts: 15
Joined: Wed Dec 22, 2021 7:42 pm

Re: IFIRE 2 - hard reset done, loader 100%, no signal from HDMI

Post by michbl1 »

Problem solved.
Ive used the oldest software which I've found on a forum, next I've upgraded it to the new one.

Post Reply

Return to “GTMEDIA I-FIRE SERIES”