GTMEDIA Forum

تیم فنی جت مدیا خواهشمند است که اعداد و ارقام را کالیبره کنید اگر بلد هستین شما رسیور برداشتی جعبه را عوض کردی شده فایندر... به نظرات دوستان و مشتری احترام بزارید و فایندر سه کاره جت مدیا را کالیبره کنید اعداد و ارقام سینگال واقعی نیست... یه فایندر ایکس کروز مدل 7700pro را تست کنید یاد بگیرید... حداقل فونت زوم سیگنال را بزرگتر کنید... اگر در توان تیم مهندسی هست گزینه برق النبی را اضافه کنید که به کاربر نشان دهد النبی خراب یا ضعیف هست...
مقدار شارژ باتری را عددی نشان بدهید که کاربر متوجه شود چند درصد شارژ باطری دارد...
چند نکته از نظرات مشتری و کابران اعمال و احترام بزارید...

amir_931 wrote: ↑

Sat Mar 11, 2023 7:47 am

تیم فنی جت مدیا خواهشمند است که اعداد و ارقام را کالیبره کنید اگر بلد هستین شما رسیور برداشتی جعبه را عوض کردی شده فایندر... به نظرات دوستان و مشتری احترام بزارید و فایندر سه کاره جت مدیا را کالیبره کنید اعداد و ارقام سینگال واقعی نیست... یه فایندر ایکس کروز مدل 7700pro را تست کنید یاد بگیرید... حداقل فونت زوم سیگنال را بزرگتر کنید... اگر در توان تیم مهندسی هست گزینه برق النبی را اضافه کنید که به کاربر نشان دهد النبی خراب یا ضعیف هست...
مقدار شارژ باتری را عددی نشان بدهید که کاربر متوجه شود چند درصد شارژ باطری دارد...
چند نکته از نظرات مشتری و کابران اعمال و احترام بزارید...

Please read the group rules, it is not necessary to repeat the message constantly

Hello, I know the rules and have read them...
You give importance to opinions and problems and solve the problems and opinions that many friends and experts have reported to your company so that they do not repeat themselves...
Why don't you care about the problems of not being calibrated..
I am waiting for the problems to be resolved. If it is not resolved, I will return the device to the seller
Do not forget God.
Why is the support weak... It is really difficult for you and Jet Media company to make the device's fonts bigger
Realized and calibrated snr values. Especially in the aerial part
Bigger zoom signal
I am not idle to come and send duplicate message
You and the professional team of Jet Media take care and solve the problems of many friends
If you bought a device yourself and it has problems, don't worry about it

You can see the copy and paste, you are talking about calibration values ​​that the V8 Finder Pro does not have

Feralkiwi wrote: ↑

Wed Mar 08, 2023 8:22 pm

C0D3R wrote: ↑

Tue Mar 07, 2023 6:26 pm

Hi, how to active zoom signal?

Normally just press the info button two or three times.

This has been done for the Finder 2, Not sure if done for the finder Pro.

15/02/2023
Change log:
1. Press INFO twice, display s and q, oversized signal bar
GTMedia_V8Finder2_V460_20230215.zip

Owen

thanks bro

Is the complete list of channels available for finder?
please if available share

You can use any list from V8X

CAJE wrote: ↑

Sun Mar 12, 2023 6:18 am

You can use any list from V8X

thanls bro
for restore channel list (GIORGIO_team_GTMediaV8X_motor.bin) to finder v8 pro, Upgrade Mode set "All Code" is True?

No, always as a database

CAJE wrote: ↑

Sun Mar 12, 2023 12:06 pm

No, always as a database

thanks bro
could you please provide me with some information regarding when the new firmware is expected to be released? (V8 Finder Pro)

CAJE wrote: ↑

Sun Mar 12, 2023 12:06 pm

No, always as a database

could you please provide me with some information regarding when the new firmware is expected to be released? (V8 Finder Pro)
@CAJE

here on the forum the latest v321

Diduk wrote: ↑

Fri Mar 17, 2023 8:40 am

here on the forum the latest v321IMG_20230317_133527.jpg

Her on the forum v321 but your firmware v325!!

Yesterday and today I compared the improvements of the new software version 3.30. So like this. Progress has been made, but it still needs to be refined. All parameters from PWR MER, BER strength, show more accurate results than with version 3.21. But still the values are higher than they should be. About 10% difference between other tested instruments. What is noticeable now is that the receiving part is less sensitive and that is what I wrote about. It measures signals with a strength over 40dBuV, roughly accurately with a 10% deviation, but weaker, although it shows "Unlocked", it cannot measure, but shows strange results. It cannot be fixed by software, only by hardware and that's it. The selectivity is also weaker. The neighboring strong channel noticeably interferes with the weaker one. And that cannot be improved programmatically. Simply put, the electronic parts in the receiver input part should have been of better quality, especially the first high-frequency amplifier in the tuners.

Hazl wrote: ↑

Sun Mar 19, 2023 6:25 pm

Yesterday and today I compared the improvements of the new software version 3.30.

Where can I download firmware 330?

330 will be a tester only version being tested before release.

Owen

That's right, it's a test version. In addition to what I wrote, it would be good if it remembers the last settings of the selected satellite or terrestrial transmitter and channel, rather than always returning to the default settings. Why wouldn't it stay, say, on Hot Bird if I tuned it last, and not always on BulgariaSat1.
Also for terrestrial TV. Why if the last test channel was say UHF C35, why does it keep going back to C5. It should stay on the C35.

Hello! Throw off who has firmware v330, I also want to test it. Thank you in advance

Diduk wrote: ↑

Fri Mar 24, 2023 5:23 pm

Hello! Throw off who has firmware v330, I also want to test it. Thank you in advance

Release v330 download/file.php?id=11484

A_F_N at 99w autorolls fine on V8 Finder Pro! Unfortunately using the USB Dump option is hanging or freezing the unit. report has being sent for review.

I updated the firmware from GTMEDIA_V8FINDER_PRO_Release_V305_20211224 to GTMedia_V8FINDER_PRO_Release_V330_20230309 and it seams that its quite an improvment

not only are signal values more acurate, it seams finder can now detect and decode a weaker signal (it seams, I did not scientificly prove that)

My portable TV is still better at receving the signal then this finder, but I hope someday this can be improved

You can see my comparison here, I compared the best firmware GTMEDIA_V8FINDER_PRO_Release_V305_20211224 with this new firmware: https://www.youtube.com/watch?v=-xyYbEASwUg
Comparison is only on DVB-T (did not have acsess to my dish right now)

Очень низкая чувствительность у прибора в режиме DVB-T2. Для настройки использовать тяжело. Особенно в условиях плохого сигнала.

vadisla wrote: ↑

Tue Apr 04, 2023 8:12 am

Очень низкая чувствительность у прибора в режиме DVB-T2. Для настройки использовать тяжело. Особенно в условиях плохого сигнала.

English: Very low sensitivity of the device in DVB-T2 mode. Difficult to use for setup. Especially in bad signal conditions.

True, for DVB-T/T2 /(people also say its for DVB-C), I cannot check for DVB-S/2/X because I don't have any other device) fortionatly I have my portable TV as an alternative (at least for DVB-T/T2)

For DVB-S/S2 there is no alternative device that would offer as much features as this GTMedia one does (I checked, its eather finder or television, or if its both, it doesn't offer DVB-S2 (let alone S2X) and no teletext, or let you record the program on USB, let alone encrypted channel support) and to top it off its more expensive, has no forum, and some companies even charge for software updates (I am looking at you SatLink)

People say: get a xyz finder, your life will be so much better
Well, I don't want a box that only shows me a bunch of numbers
There nothing like this, sorry maybe you might not need it but I do (Teletext, encrypted channels support, internet support (for BISS), recording to USB, DVBS/S2/S2X, etc)

So GTMedia it is, yes, its not the best, but its the onlything we've got
I just hope this company would continue to listen for user requests and offer extra goodies that more expensive finders do not (which for now, it does (some user wished for bigger menu on this new suftware and he got it)

Я очень надеюсь,что компания сделает из него прибор именно для настройки. По DVB-S S2 всё хорошо. А вот по DVB -T2 пока не очень.

Very, very, very bad with t2 reception. I wonder why the company is silent. Why is this so? How to fix it? Software, or is it weak hardware?

Hello! Who will tell me what is the best firmware for t2.