Gtmedia v8 finder meter
Moderators: admin, GTMedia Team
Gtmedia v8 finder meter
please in the next firmware put the option in DB in Gtmedia v8 finder meter thank you very much; this option helps a lot when locating the satellites
Re: Gtmedia v8 finder meter
please put in the following firmware, the option in S / N dB {deciBel} this function helps in the location and adjustment of the satelite, in the Gtemedia v8finder meter thank you, thank you very much
Re: Gtmedia v8 finder meter
To display the strength in decibels, it must be calibrated. The display of signal strength in percent is guaranteed not calibrated
It would make more sense to display the BER value.
Normally it is sufficient to adjust the antenna to the highest signal strength and signal quality.
Best regards pegasus07
It would make more sense to display the BER value.
Normally it is sufficient to adjust the antenna to the highest signal strength and signal quality.
Best regards pegasus07
Don Quijote for satellite systems
-
- Posts: 2
- Joined: Fri Apr 12, 2019 12:28 am
Re: Gtmedia v8 finder meter
In the next updates could be added the level of dB and better the signal level bar that marks a very low percentage.
Re: Gtmedia v8 finder meter
Gtmedia v8 finder tem que melhorar a intensidade do sinal nas barras muito baixa e mostrar a força dos DBS no displey
Re: Gtmedia v8 finder meter
suggestion in the next firmware of the GTMEDIA V8 FINDER METER besides the FORCE AND QUALITY, add the function CN: dB [deciBEL} to better adjust the location of the satellites. and also improve the signal level bar that marks a very low percentage {the signal quality is setting very low level} please add the level in dB WITH THE FORCES AND QUALITY
Re: Gtmedia v8 finder meter
i agree with u signal bar is ver bad
-
- Posts: 14
- Joined: Sun Mar 18, 2018 7:30 pm
Re: Gtmedia v8 finder meter
Tá fraco mesmo as barras de intensidade, e de qualidade. Não de 23% nos transponder CCM. Tem melhor isso. Em nome do clientes, e usuário da marca
-
- Posts: 2
- Joined: Tue Jan 08, 2019 11:00 pm
Re: Gtmedia v8 finder meter
I have the same issue, disappointed with this V8 finder meter the signal bar is very bad won't recommend.
-
- Posts: 19
- Joined: Thu May 09, 2019 5:30 pm
- Location: United States
- Contact:
Re: Gtmedia v8 finder meter
I,m also facing the same issue, Signal Quality is very low....please make new software & fixed it.
Re: Gtmedia v8 finder meter
Same here me too facing the same trouble with my recently bought V8 FINDER METER THE SIGNAL QUALITY IS TOO LOW PLEASE REQUEST TO FREESAT TO FIX THE ISSUE ASAP
-
- Posts: 32
- Joined: Wed Feb 13, 2019 12:14 pm
Re: Gtmedia v8 finder meter
Nova Atualização disponível... --> New Update Available ..
Re: Gtmedia v8 finder meter
Why Gtmedia v8 finder Meter have no channel&satlite editor...?Please help in....
Re: Gtmedia v8 finder meter
Feedback received from one of my client. He has V8 Finder latest version with latest firmware installed/ His V8 finder showing peak signal at the dish location but when its connected to the decoder it has no signal or weak signal. How is that happens ?
Re: Gtmedia v8 finder meter
1. You may be able to use the editor to edit your chnnels.
2. The new V8 Finder-meter has a very sensitive reciever and will receive at the dish while your older set top box may not.
You may also have cable losses from the dish to the STB.
Owen
2. The new V8 Finder-meter has a very sensitive reciever and will receive at the dish while your older set top box may not.
You may also have cable losses from the dish to the STB.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Gtmedia v8 finder meter
JohnMethew wrote: ↑Thu May 09, 2019 6:05 pmI,m also facing the same issue, Signal Quality is very low....please make new software & fixed it.
Re: Gtmedia v8 finder meter
Remember that signal quality as reported by a sat unit is not a calabrated level report, but a refference of one signal to another on that unit.
Yes it looks like Freesat have set the report output a bit lower than other units.
Owen
Yes it looks like Freesat have set the report output a bit lower than other units.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.