Page 1 of 1
Sat finder v8
Posted: Tue Oct 29, 2019 3:58 am
by Ricardof
Un amigo tiene una freesat finder y veo que la velocidad de respuesta cuando busca potencia y calidad al mover la antena es muy rapida y con una que compre hace poco gtmedia finder v8, es muy lento ademas debo de hacerle un scan para que me de respuesta.... le cargue su configuracion de la freesat a gtmedia v8 pero me dio error. Me puden ayudar con este problema... saludos a todos. Se supone que ayuda a encontrar señal satelital pero veo que es complejo.
Re: Sat finder v8
Posted: Wed Oct 30, 2019 2:00 am
by Feralkiwi
Yes I also have this issue.
I use a tone satellite finder in the LNB cable that helps find the sat.
Then i use the finder to fine tune the dish.
Owen
Re: Sat finder v8
Posted: Tue Nov 26, 2019 5:26 am
by Ricardof
Feralkiwi wrote: ↑Wed Oct 30, 2019 2:00 am
Yes I also have this issue.
I use a tone satellite finder in the LNB cable that helps find the sat.
Then i use the finder to fine tune the dish.
Owen
I little speak inglish.
Tell my how you do.
I can,t find the arsat 2 is the 80w.
Re: Sat finder v8
Posted: Tue Nov 26, 2019 5:35 am
by Feralkiwi
With a tone finder in the LNB cable you move the dish until you get the highest tone.
If you do not have a tone finder, manually add a tp frequency for the sat you are looking for and move the dish very slowly until you see a signal level.
The response time for the finder is slow so you need to move the dish slow.
You can find frequencies for your sat on sites like www dot lyngsat dot com