move new satpositions? - memory question?

V8 FINDER PRO2 /V8 FINDER2 / BT03 /BT05

Moderators: admin, GTMedia Team

Post Reply
weakbit
Posts: 11
Joined: Mon Jan 13, 2020 7:53 pm

move new satpositions? - memory question?

Post by weakbit »

Hello,
today I received my new GM-media V8 finder. I open the box and start to experiment with it.
Erroneous I delete the Satellite position 10°East and make it new. But now the position is not listed in the mid it is on the end of the list.
I don't want to press the up Button a thousand times - how I can move the new position from the end to the mid of the list?

Do my Memory is lost after searching a lot of satellites and then turning off the power - how I can fix this problem?
I can't go to a installation of a Satellite dish and must search all memory again and again!

Best Regards
weakbit

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: move new satpositions? - memory question?

Post by Feralkiwi »

What type of Finder do you have?
A V71 or the newer V8 Finder-meter V73?
Also do you have a Freesat unit and not a clone?
You can delete the other satellites from the list and just add the ones you use.

What problem are you having with the 22kHz?

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

weakbit
Posts: 11
Joined: Mon Jan 13, 2020 7:53 pm

Re: move new satpositions? - memory question?

Post by weakbit »

I have the V8 finder Meter
HW 1.20 Aug 01 2019
SW V105.5.152 Aug 1 2019
I don't not what is the clone and what not? It is written on it GM-Media V8
In Antenna Setup is "22kHz Auto" gray out and I don't know if it work or not?

Post Reply

Return to “GTMEDIA FINDER SERIES”