Problem scan unicable

V8 FINDER PRO2 /V8 FINDER2 / BT03 /BT05

Moderators: admin, GTMedia Team

Post Reply
paolopa
Posts: 2
Joined: Thu Jan 30, 2020 1:15 pm

Problem scan unicable

Post by paolopa »

hi I purchased a V8 Finder Meter to check the pointing of my dish.
I have a unicable LNB set on my VU+ like this:
LOF Unicable / scr
Humax manufacturer
Type 150 SCR
SCR1 CHANNEL
FREQUENCY 1210

Now on the V8 I set the channel search on the Hot Bird 13 ° E satellite
LNB FREQUENCY imposed
Unicable 10200
FREQUENCY CONTROL 1210
CHANNEL IF 1
PSIZIONE S A

I do a search but I can't find anything.

How should I set it up?

salve ho acquistato un V8 Finder Meter per controllare il puntamento della mia parabola.
Io ho un LNB unicable impostato sul mio VU+ così:
LOF Unicable/scr
Costruttore Humax
Tipo 150 SCR
CANALE SCR1
FREQUENZA 1210

Ora sul V8 imposto la ricerca dei canali sul satellite Hot Bird 13°E
LNB FREQUENZA imposto
Unicable 10200
CONTROLLO FREQUENZA 1210
CANALE IF 1
PSIZIONE S A

Effettuo una ricerca ma non trovo nulla.

Come devo impostare il tutto?

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Problem scan unicable

Post by Feralkiwi »

There are options for 1 to 8 for the IF channel.
Why did you choose "1" ?
There is also unicable 9750/10600. I would expect that to be more the normal LNB frequency.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

paolopa
Posts: 2
Joined: Thu Jan 30, 2020 1:15 pm

Re: Problem scan unicable

Post by paolopa »

my writing error I chose unicable 9750/10600 and then I tried all the others too but I only tune in 30 channels and no more.

mio errore di scrittura ho scelto proprio unicable 9750/10600 e poi ho provato tutti gli altri anche ma non faccio che sintonizzare 30 canali e non di più.

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Problem scan unicable

Post by Feralkiwi »

Maybe with unicable you have to enter all the TP info and do a "Auto"scan to get the channels.
Unicable send instructions to the LNB as to what frequency to tune to and send back.
Maybe blind scan does not send this info

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

Post Reply

Return to “GTMEDIA FINDER SERIES”