Gtmedia V8 Meter has BER???

V8 FINDER PRO2 /V8 FINDER2 / BT03 /BT05

Moderators: admin, GTMedia Team

Post Reply
yayadie
Posts: 97
Joined: Mon Nov 02, 2020 7:07 pm

Gtmedia V8 Meter has BER???

Post by yayadie »

Hi,

Do you know if this finder shows the the BER (Bit Error Ratio) in real time??? I search on videos and I didn´t find it...

Thanks

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Gtmedia V8 Meter has BER???

Post by Feralkiwi »

I have seen some error rate shown.

I would need to test and check again to confirm.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

yayadie
Posts: 97
Joined: Mon Nov 02, 2020 7:07 pm

Re: Gtmedia V8 Meter has BER???

Post by yayadie »

Thanks, I attach a picture that I am talking about...

Feralkiwi wrote:
Wed May 05, 2021 9:04 pm
I have seen some error rate shown.

I would need to test and check again to confirm.

Owen
Attachments
BER image finder.jpg
BER image finder.jpg (882.45 KiB) Viewed 1177 times

yayadie
Posts: 97
Joined: Mon Nov 02, 2020 7:07 pm

Re: Gtmedia V8 Meter has BER???

Post by yayadie »

Someone who use this finder often knows??? Thanks again...

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Gtmedia V8 Meter has BER???

Post by Feralkiwi »

The error rate is on the :Info" screen.

I tested on a weak signal dish.
If I hold my hand in front of the dish the error rate counts up.
I got to an error rate of 65-120 on this weak signal and the channel started cutting out. Note this channel only just comes in on this dish.
The rate was shown what looked like twice a second.

Owen
.
.
IMG_6913.JPG
IMG_6913.JPG (734.12 KiB) Viewed 1139 times
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

yayadie
Posts: 97
Joined: Mon Nov 02, 2020 7:07 pm

Re: Gtmedia V8 Meter has BER???

Post by yayadie »

Thanks for the answer... yes I see that shows the PER, not the BER... thanks again for your help...



Feralkiwi wrote:
Sat May 08, 2021 12:54 am
The error rate is on the :Info" screen.

I tested on a weak signal dish.
If I hold my hand in front of the dish the error rate counts up.
I got to an error rate of 65-120 on this weak signal and the channel started cutting out. Note this channel only just comes in on this dish.
The rate was shown what looked like twice a second.

Owen
.
.
IMG_6913.JPG

Post Reply

Return to “GTMEDIA FINDER SERIES”