V8 Finder- Baixa Sensibilidade - Low Sensibility

V8 FINDER PRO2 /V8 FINDER2 / BT03 /BT05

Moderators: admin, GTMedia Team

Post Reply
crcneto
Posts: 4
Joined: Wed Jun 09, 2021 2:29 am

V8 Finder- Baixa Sensibilidade - Low Sensibility

Post by crcneto »

Amigos do Brasil!

Adquiri um aparelho V8 Finder há uns 2 meses e não consigo encontrar um sinal Força acima de 30% e Qualidade acima de 4%.
Minha antena está apontada para o SES 6 (40.5 W; OI TV) em um prato de 60 cm. Tenho certeza que o apontamento está correto, pois estou utilizando no meu receptor.
Já fiz a ultima atuailização do firmware (v.163) e nada!
O que posso fazer para melhorar isto?

Obrigado a todos!
-------------------------

Dear friends!

I bought a V8 Finder 2 months ago and I can't a good signal. Nowdays, I have strenght at 30% and Quality at 4%.
My dish it's pointed to SES 6 (40.5 W). I have absolutely certain that pointing it's correctly, because I'm watching TV at my receiever.
I did last firmware upgrade (version 163) and I didn't sucess.
What can I do to improve this?

Best regards!

User avatar
Feralkiwi
网站管理员
Posts: 8340
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: V8 Finder- Baixa Sensibilidade - Low Sensibility

Post by Feralkiwi »

To update you must "Unpack" the .zip folder and use the .bin file

Check that you have the correct antenna settings for your satellite, 9750/10600 or 11300 for the LNB frequency and any switch setting DiSEqC you need to.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

crcneto
Posts: 4
Joined: Wed Jun 09, 2021 2:29 am

Re: V8 Finder- Baixa Sensibilidade - Low Sensibility

Post by crcneto »

I did this way. Actually I using firmware version 163.

I tried all configurations about LNB. The.better that I had was 22-25% with someone transponders.

So more suggestions?

Thanks

User avatar
Feralkiwi
网站管理员
Posts: 8340
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: V8 Finder- Baixa Sensibilidade - Low Sensibility

Post by Feralkiwi »

I see 40.5w is mostly C band.
Has your LNB opened to the weather and got wet or has bugs in it?
I had one satellite dish pointing at a low satellite, 4.2 degrees, and at night the signal would fade because a bird roosted in the open C band LNB at night. After a few weeks day time signal dropped due to the bird droppings.
Another ku LNB had a spider that sat between the case and the vertical pick up wire, and that dropped signal.

Do you have another satellite dish to check you finder on?

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

crcneto
Posts: 4
Joined: Wed Jun 09, 2021 2:29 am

Re: V8 Finder- Baixa Sensibilidade - Low Sensibility

Post by crcneto »

I don't believe there are bugs at dish.
At this moment I'm watching tv using this sat.
And my receiver it's using ku band.

User avatar
Feralkiwi
网站管理员
Posts: 8340
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: V8 Finder- Baixa Sensibilidade - Low Sensibility

Post by Feralkiwi »

When you tried to update, did you use the menus?
If you have the .bin file on the USB stick the system should see it and allow you to update.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

crcneto
Posts: 4
Joined: Wed Jun 09, 2021 2:29 am

Re: V8 Finder- Baixa Sensibilidade - Low Sensibility

Post by crcneto »

Yes. I did fully update.
At Finder info's I see version 163 applied.

jacimg
Posts: 2
Joined: Sun Sep 15, 2019 9:11 pm
Location: Mogi Guaçu SP, Brazil

Re: V8 Finder- Baixa Sensibilidade - Low Sensibility

Post by jacimg »

crcneto wrote:
Wed Jun 09, 2021 2:51 am
Amigos do Brasil!

Adquiri um aparelho V8 Finder há uns 2 meses e não consigo encontrar um sinal Força acima de 30% e Qualidade acima de 4%.
Minha antena está apontada para o SES 6 (40.5 W; OI TV) em um prato de 60 cm. Tenho certeza que o apontamento está correto, pois estou utilizando no meu receptor.
Já fiz a ultima atuailização do firmware (v.163) e nada!
O que posso fazer para melhorar isto?

Obrigado a todos!
-------------------------

Verifica a frequencia do LNB esta 9750/10600

Post Reply

Return to “GTMEDIA FINDER SERIES”