GTMEDIA Forum

hi dears, i am updated last firmware and , i check device i have got reports

1 . what is that ? https://mega.nz/file/MmIVgJpR#82eejIaJS ... WL664A2YG4 ~~ 1.87 gb

i plug usb flash disk

created auto timeshit.dat files?

2. i cant see channel list editor , i can backup satellites list but files name *. bin but our forum editors want to *.udf file?

3. i want to change opening logo

4. i cant see auto last firmware download online internet, i have got wifi device

i wait your reply thank you best days for you

The timeship is for watching the video, it depends on the time you set it, you can remove it when you want

My friend , this is sat finder, sat finder is using find satellite

It is auto open i cant close/disable

4. i cant see auto last firmware download online internet, i have got wifi device

The finder2 software is here, including many older versions.
You can go back using the forced recovery method.

Owen

Dear admins, if you are add url link or internet download page, users can download online internet

May be everytime usb disk not near person

And i have got last firmware 27 september 2022 but timeshit.dat have got creating auto

If it has got screen video capture i can do it

Av in and av out jack dont work

I have got 3 different 3.5mm jack sorry dont work

The 3.5mm AV cables for GT Media units needs to be a long plug.

If you only have shorty one, try connecting the video to the red plug.

Owen

I have got more cables ,sorry dont work

I am using capture cards

Rca 2 Usb capture and

Hdmi 2 usb

You can see internet and photos

My capture card working other device but v8 finder 2 dont work

Check the video output setting for the finder2 as it may be PAL when your capture cards need NTSC.
PAL is GT Media default.

Owen

I did try more time but no video

hi

There is the BLight button on the finder. This turns off the screen back light and the AV output.

Can you confirm that you have a AV 3.5mm cable that is 18mm long as per this pic?

Owen
.
.