short circuit protection
Moderators: admin, GTMedia Team
-
- Posts: 3
- Joined: Sat Dec 24, 2022 1:57 pm
short circuit protection
good evening, I was doing some tests with the newly arrived V8 sat finder. the short circuit protection message comes out and I no longer receive anything. Is there a protection fuse or is the device damaged? I await your message. thanks and regards danilo
Re: short circuit protection
You will have to check the installation or connectors that have a short circuit
-
- Posts: 3
- Joined: Sat Dec 24, 2022 1:57 pm
short circuit protection
i managed to scan hot bird channels once. If I attach a receiver I have satellite reception, but if I connect to finder, it doesn't detect anything - furthermore the F connector to which I connect the dish is quite hot. maybe is damaged ?
Re: short circuit protection
There was a software update to fix the short circuit message report at one time.
There is no fuse, the system just shuts down the LNB connection for a moment and then tries again.
What model of finder do you have?
Do you jus have a LNB connected or do you have a switch or USALS motor?
The F connector is sort of used as a heat sink for the receiver unit, so it does get a little warm.
Owen
There is no fuse, the system just shuts down the LNB connection for a moment and then tries again.
What model of finder do you have?
Do you jus have a LNB connected or do you have a switch or USALS motor?
The F connector is sort of used as a heat sink for the receiver unit, so it does get a little warm.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.