V8 Finder Pro New Firmware

V8 FINDER PRO2 /V8 FINDER2 / BT03 /BT05

Moderators: admin, GTMedia Team

amir_931
Posts: 13
Joined: Thu Feb 02, 2023 3:19 pm

Re: V8 Finder Pro New Firmware

Post by amir_931 »

تیم فنی جت مدیا خواهشمند است که اعداد و ارقام را کالیبره کنید اگر بلد هستین شما رسیور برداشتی جعبه را عوض کردی شده فایندر... به نظرات دوستان و مشتری احترام بزارید و فایندر سه کاره جت مدیا را کالیبره کنید اعداد و ارقام سینگال واقعی نیست... یه فایندر ایکس کروز مدل 7700pro را تست کنید یاد بگیرید... حداقل فونت زوم سیگنال را بزرگتر کنید... اگر در توان تیم مهندسی هست گزینه برق النبی را اضافه کنید که به کاربر نشان دهد النبی خراب یا ضعیف هست...
مقدار شارژ باتری را عددی نشان بدهید که کاربر متوجه شود چند درصد شارژ باطری دارد...
چند نکته از نظرات مشتری و کابران اعمال و احترام بزارید...

User avatar
CAJE
网站管理员
Posts: 2262
Joined: Sun Dec 06, 2020 8:00 pm

Re: V8 Finder Pro New Firmware

Post by CAJE »

amir_931 wrote:
Sat Mar 11, 2023 7:47 am
تیم فنی جت مدیا خواهشمند است که اعداد و ارقام را کالیبره کنید اگر بلد هستین شما رسیور برداشتی جعبه را عوض کردی شده فایندر... به نظرات دوستان و مشتری احترام بزارید و فایندر سه کاره جت مدیا را کالیبره کنید اعداد و ارقام سینگال واقعی نیست... یه فایندر ایکس کروز مدل 7700pro را تست کنید یاد بگیرید... حداقل فونت زوم سیگنال را بزرگتر کنید... اگر در توان تیم مهندسی هست گزینه برق النبی را اضافه کنید که به کاربر نشان دهد النبی خراب یا ضعیف هست...
مقدار شارژ باتری را عددی نشان بدهید که کاربر متوجه شود چند درصد شارژ باطری دارد...
چند نکته از نظرات مشتری و کابران اعمال و احترام بزارید...
Please read the group rules, it is not necessary to repeat the message constantly

amir_931
Posts: 13
Joined: Thu Feb 02, 2023 3:19 pm

Re: V8 Finder Pro New Firmware

Post by amir_931 »

Hello, I know the rules and have read them...
You give importance to opinions and problems and solve the problems and opinions that many friends and experts have reported to your company so that they do not repeat themselves...
Why don't you care about the problems of not being calibrated..
I am waiting for the problems to be resolved. If it is not resolved, I will return the device to the seller
Do not forget God.
Why is the support weak... It is really difficult for you and Jet Media company to make the device's fonts bigger
Realized and calibrated snr values. Especially in the aerial part
Bigger zoom signal
I am not idle to come and send duplicate message
You and the professional team of Jet Media take care and solve the problems of many friends
If you bought a device yourself and it has problems, don't worry about it

User avatar
CAJE
网站管理员
Posts: 2262
Joined: Sun Dec 06, 2020 8:00 pm

Re: V8 Finder Pro New Firmware

Post by CAJE »

You can see the copy and paste, you are talking about calibration values ​​that the V8 Finder Pro does not have

C0D3R
Posts: 12
Joined: Fri Feb 17, 2023 6:16 pm

Re: V8 Finder Pro New Firmware

Post by C0D3R »

Feralkiwi wrote:
Wed Mar 08, 2023 8:22 pm
C0D3R wrote:
Tue Mar 07, 2023 6:26 pm
Hi, how to active zoom signal?
Normally just press the info button two or three times.

This has been done for the Finder 2, Not sure if done for the finder Pro.
15/02/2023
Change log:
1. Press INFO twice, display s and q, oversized signal bar
GTMedia_V8Finder2_V460_20230215.zip
Owen
thanks bro

Is the complete list of channels available for finder?
please if available share
:?:

User avatar
CAJE
网站管理员
Posts: 2262
Joined: Sun Dec 06, 2020 8:00 pm

Re: V8 Finder Pro New Firmware

Post by CAJE »

You can use any list from V8X

C0D3R
Posts: 12
Joined: Fri Feb 17, 2023 6:16 pm

Re: V8 Finder Pro New Firmware

Post by C0D3R »

CAJE wrote:
Sun Mar 12, 2023 6:18 am
You can use any list from V8X
thanls bro
for restore channel list (GIORGIO_team_GTMediaV8X_motor.bin) to finder v8 pro, Upgrade Mode set "All Code" is True?

User avatar
CAJE
网站管理员
Posts: 2262
Joined: Sun Dec 06, 2020 8:00 pm

Re: V8 Finder Pro New Firmware

Post by CAJE »

No, always as a database

C0D3R
Posts: 12
Joined: Fri Feb 17, 2023 6:16 pm

Re: V8 Finder Pro New Firmware

Post by C0D3R »

CAJE wrote:
Sun Mar 12, 2023 12:06 pm
No, always as a database
thanks bro
could you please provide me with some information regarding when the new firmware is expected to be released? (V8 Finder Pro)

C0D3R
Posts: 12
Joined: Fri Feb 17, 2023 6:16 pm

Re: V8 Finder Pro New Firmware

Post by C0D3R »

CAJE wrote:
Sun Mar 12, 2023 12:06 pm
No, always as a database
could you please provide me with some information regarding when the new firmware is expected to be released? (V8 Finder Pro)
@CAJE
Last edited by C0D3R on Sat Mar 18, 2023 6:54 am, edited 1 time in total.

Diduk
Posts: 20
Joined: Sun Mar 12, 2023 5:27 pm

Re: V8 Finder Pro New Firmware

Post by Diduk »

here on the forum the latest v321
Attachments
Screenshot_20230404_200002_Samsung Internet.jpg
Screenshot_20230404_200002_Samsung Internet.jpg (175.8 KiB) Viewed 1312 times

C0D3R
Posts: 12
Joined: Fri Feb 17, 2023 6:16 pm

Re: V8 Finder Pro New Firmware

Post by C0D3R »

Diduk wrote:
Fri Mar 17, 2023 8:40 am
here on the forum the latest v321IMG_20230317_133527.jpg
Her on the forum v321 but your firmware v325!!

Hazl
Posts: 51
Joined: Fri Jan 20, 2023 5:03 pm

Re: V8 Finder Pro New Firmware

Post by Hazl »

Yesterday and today I compared the improvements of the new software version 3.30. So like this. Progress has been made, but it still needs to be refined. All parameters from PWR MER, BER strength, show more accurate results than with version 3.21. But still the values are higher than they should be. About 10% difference between other tested instruments. What is noticeable now is that the receiving part is less sensitive and that is what I wrote about. It measures signals with a strength over 40dBuV, roughly accurately with a 10% deviation, but weaker, although it shows "Unlocked", it cannot measure, but shows strange results. It cannot be fixed by software, only by hardware and that's it. The selectivity is also weaker. The neighboring strong channel noticeably interferes with the weaker one. And that cannot be improved programmatically. Simply put, the electronic parts in the receiver input part should have been of better quality, especially the first high-frequency amplifier in the tuners.
Image

Diduk
Posts: 20
Joined: Sun Mar 12, 2023 5:27 pm

Re: V8 Finder Pro New Firmware

Post by Diduk »

Hazl wrote:
Sun Mar 19, 2023 6:25 pm
Yesterday and today I compared the improvements of the new software version 3.30.
Image
Where can I download firmware 330?

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: V8 Finder Pro New Firmware

Post by Feralkiwi »

330 will be a tester only version being tested before release.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

Hazl
Posts: 51
Joined: Fri Jan 20, 2023 5:03 pm

Re: V8 Finder Pro New Firmware

Post by Hazl »

That's right, it's a test version. In addition to what I wrote, it would be good if it remembers the last settings of the selected satellite or terrestrial transmitter and channel, rather than always returning to the default settings. Why wouldn't it stay, say, on Hot Bird if I tuned it last, and not always on BulgariaSat1.
Also for terrestrial TV. Why if the last test channel was say UHF C35, why does it keep going back to C5. It should stay on the C35.

Diduk
Posts: 20
Joined: Sun Mar 12, 2023 5:27 pm

Re: V8 Finder Pro New Firmware

Post by Diduk »

Hello! Throw off who has firmware v330, I also want to test it. Thank you in advance :D

C0D3R
Posts: 12
Joined: Fri Feb 17, 2023 6:16 pm

Re: V8 Finder Pro New Firmware

Post by C0D3R »

Diduk wrote:
Fri Mar 24, 2023 5:23 pm
Hello! Throw off who has firmware v330, I also want to test it. Thank you in advance :D
Release v330 download/file.php?id=11484

User avatar
cpr43
网站管理员
Posts: 7049
Joined: Thu Aug 11, 2016 1:41 pm

Re: V8 Finder Pro New Firmware

Post by cpr43 »

A_F_N at 99w autorolls fine on V8 Finder Pro! Unfortunately using the USB Dump option is hanging or freezing the unit. report has being sent for review.

veso266
Posts: 14
Joined: Sat Dec 03, 2022 4:02 pm

Re: V8 Finder Pro New Firmware

Post by veso266 »

I updated the firmware from GTMEDIA_V8FINDER_PRO_Release_V305_20211224 to GTMedia_V8FINDER_PRO_Release_V330_20230309 and it seams that its quite an improvment

not only are signal values more acurate, it seams finder can now detect and decode a weaker signal (it seams, I did not scientificly prove that)

My portable TV is still better at receving the signal then this finder, but I hope someday this can be improved

You can see my comparison here, I compared the best firmware GTMEDIA_V8FINDER_PRO_Release_V305_20211224 with this new firmware: https://www.youtube.com/watch?v=-xyYbEASwUg
Comparison is only on DVB-T (did not have acsess to my dish right now)

vadisla
Posts: 6
Joined: Sun Oct 23, 2022 7:19 pm
Location: Крым, Россия

Re: V8 Finder Pro New Firmware

Post by vadisla »

Очень низкая чувствительность у прибора в режиме DVB-T2. Для настройки использовать тяжело. Особенно в условиях плохого сигнала.

veso266
Posts: 14
Joined: Sat Dec 03, 2022 4:02 pm

Re: V8 Finder Pro New Firmware

Post by veso266 »

vadisla wrote:
Tue Apr 04, 2023 8:12 am
Очень низкая чувствительность у прибора в режиме DVB-T2. Для настройки использовать тяжело. Особенно в условиях плохого сигнала.

English: Very low sensitivity of the device in DVB-T2 mode. Difficult to use for setup. Especially in bad signal conditions.
True, for DVB-T/T2 /(people also say its for DVB-C), I cannot check for DVB-S/2/X because I don't have any other device) fortionatly I have my portable TV as an alternative (at least for DVB-T/T2)

For DVB-S/S2 there is no alternative device that would offer as much features as this GTMedia one does (I checked, its eather finder or television, or if its both, it doesn't offer DVB-S2 (let alone S2X) and no teletext, or let you record the program on USB, let alone encrypted channel support) and to top it off its more expensive, has no forum, and some companies even charge for software updates (I am looking at you SatLink)

People say: get a xyz finder, your life will be so much better
Well, I don't want a box that only shows me a bunch of numbers
There nothing like this, sorry maybe you might not need it but I do (Teletext, encrypted channels support, internet support (for BISS), recording to USB, DVBS/S2/S2X, etc)

So GTMedia it is, yes, its not the best, but its the onlything we've got
I just hope this company would continue to listen for user requests and offer extra goodies that more expensive finders do not (which for now, it does (some user wished for bigger menu on this new suftware and he got it)

vadisla
Posts: 6
Joined: Sun Oct 23, 2022 7:19 pm
Location: Крым, Россия

Re: V8 Finder Pro New Firmware

Post by vadisla »

Я очень надеюсь,что компания сделает из него прибор именно для настройки. По DVB-S S2 всё хорошо. А вот по DVB -T2 пока не очень.

Diduk
Posts: 20
Joined: Sun Mar 12, 2023 5:27 pm

Re: V8 Finder Pro New Firmware

Post by Diduk »

Very, very, very bad with t2 reception. I wonder why the company is silent. Why is this so? How to fix it? Software, or is it weak hardware?

Diduk
Posts: 20
Joined: Sun Mar 12, 2023 5:27 pm

Re: V8 Finder Pro New Firmware

Post by Diduk »

Hello! Who will tell me what is the best firmware for t2.

Post Reply

Return to “GTMEDIA FINDER SERIES”