V8 Finder Pro New Firmware

[Hazl]

Everyone here who writes that the device is great and that they are satisfied with it, are either GT Media players, or they don't understand the technical features of this device, which it should have. Yes, with this new software 3.30 more accurate measurement of DVB-T/T2/C/C2 parameters has been fixed, but it is simply blind at signals at levels below 44dBuV. Since I'm not the only one who has it, I compared it with two of my work colleagues and the results are the same. So it's not about some malfunction of my device, but it's a global problem with all such devices. There is very little chance that this can be corrected by software, because it is a matter of hardware, specifically the sensitivity and selectivity of the VHF-UHF tuner and the parts in it. There is also AGC, Automatic Gain Control which is bad.

[CAJE]

Measurement of extremely weak signals such as -70 and -80 dBm are not suitable for measuring DVB signals, a range below -70 dBm is used to search for interference, 44dBuV is a very bad signal and worse if you have taken the data from PWR, in the BAT the data will be worse

[C0D3R]

Hello
What is the difference between hw version 1.0 and version 1.01?
How to upgrade to hw version 1.01?

Version 3.30 has a charge display problem. During operation, the charge will decrease, but after the device is turned off and on, the charge mark will be full!

Add auto standby and power off features in next update
Also add the ability to move satellite names like receivers.

[kladovchk]

Вообще то этот прибор , прежде всего для настройки. А он получается, игрушка. Сигнал т2 на нём настроить невозможно. Только очень сильный. Даже усилитель в антенне не помогает. Самый дешёвый тюнер работает намного лучше.

Я не знаю какую Вы используете антенну для настройки цифровых каналов, но у меня проблем с настройкой нет. Софт последний V330_20230309.

[Diduk]

Hello
What is the difference between hw version 1.0 and version 1.01?
How to upgrade to hw version 1.01?

Version 3.30 has a charge display problem. During operation, the charge will decrease, but after the device is turned off and on, the charge mark will be full!

Add auto standby and power off features in next update
Also add the ability to move satellite names like receivers.

Here you will not find answers to your question, even to such a simple one as the bootloader v1.0 or v1.01. There are no electronics specialists on the gtmedia team here. The only team that can not believe us users and praise this crap v8 finder pro

[Diduk]

Вообще то этот прибор , прежде всего для настройки. А он получается, игрушка. Сигнал т2 на нём настроить невозможно. Только очень сильный. Даже усилитель в антенне не помогает. Самый дешёвый тюнер работает намного лучше.

Я не знаю какую Вы используете антенну для настройки цифровых каналов, но у меня проблем с настройкой нет. Софт последний V330_20230309.

Это у вас сильный сигна. Вот попробуйте слабый поймать на этом говне

[kladovchk]

Вообще то этот прибор , прежде всего для настройки. А он получается, игрушка. Сигнал т2 на нём настроить невозможно. Только очень сильный. Даже усилитель в антенне не помогает. Самый дешёвый тюнер работает намного лучше.

Я не знаю какую Вы используете антенну для настройки цифровых каналов, но у меня проблем с настройкой нет. Софт последний V330_20230309.

Это у вас сильный сигна. Вот попробуйте слабый поймать на этом говне

Это сигнал не прямой, а отраженный. Нет прямой видимости до телецентра. Если у Вас сама антенна го*****но, то причём тут сам прибор. Вы что живёте в пустыне?

[vadisla]

Ставил антенну, сигнал на приборе поймал сразу. Но только от телецентра на который бала направлена. Поставил тюнер, самый дешёвый. Так вот он принял сигнал ещё с двух передатчиков , которые находятся сзади антенны. Прибор их даже не заметил. Чувствительность у прибора очень, очень низкая. Вопрос к компании, когда вы это исправите.

[C0D3R]

Hello
What is the difference between hw version 1.0 and version 1.01?
How to upgrade to hw version 1.01?

Version 3.30 has a charge display problem. During operation, the charge will decrease, but after the device is turned off and on, the charge mark will be full!

Add auto standby and power off features in next update
Also add the ability to move satellite names like receivers.

Here you will not find answers to your question, even to such a simple one as the bootloader v1.0 or v1.01. There are no electronics specialists on the gtmedia team here. The only team that can not believe us users and praise this crap v8 finder pro

This machine is garbage, the manager here doesn't even respect his customers
Not sure if they know how to provide tech support
With this lack of support and poor quality of the product, I think the device is made by another company and only the name of GTMedia is registered on it at the request of GTMedia.

[Diduk]

Hello
What is the difference between hw version 1.0 and version 1.01?
How to upgrade to hw version 1.01?

Version 3.30 has a charge display problem. During operation, the charge will decrease, but after the device is turned off and on, the charge mark will be full!

Add auto standby and power off features in next update
Also add the ability to move satellite names like receivers.

Here you will not find answers to your question, even to such a simple one as the bootloader v1.0 or v1.01. There are no electronics specialists on the gtmedia team here. The only team that can not believe us users and praise this crap v8 finder pro

This machine is garbage, the manager here doesn't even respect his customers
Not sure if they know how to provide tech support
With this lack of support and poor quality of the product, I think the device is made by another company and only the name of GTMedia is registered on it at the request of GTMedia.

This is my first product from this company. I will never use this company's products again. First and last

[CAJE]

Hi guys
What is the difference between hw version 1.0 and version 1.01?
How to upgrade to hw version 1.01?

It cannot be updated, it is the set of components that make up the material part that has had a slight modification

[amin-sh]

Hello
Thank you and thank you for your efforts. It's been a while since I bought both the GT V8 FIND 2 BLACK model and the GT V8 PRO model. Almost everything is ok, but there are changes in both models during adjustment and the tuner does not react well... when receiving the direction, whether with or without jamming, there is a lot of strange delay that is painful and frustrating. It is boring and troublesome. Also, a delay in this finder with this style is unlikely.. Also, in the orange Pro model, the fonts are extremely small, and I already said that the setting screen is extremely small in the Pro model.. Please check and solve these problems, I will be grateful..

[C0D3R]

Hi guys
What is the difference between hw version 1.0 and version 1.01?
How to upgrade to hw version 1.01?

It cannot be updated, it is the set of components that make up the material part that has had a slight modification

Does this mean that the hardware version 1.0 is weak or has problems?

Version 3.30 has a charge display problem. During operation, the charge will decrease, but after the device is turned off and on, the charge mark will be full!

Add auto standby and power off features in next update
Also add the ability to move satellite names like receivers.
Add the ability to change the font size

[amir_931]

Jet Media technical team, please enlarge the fonts, fix the font problem, check the font problem, enlarge the font of the device, enlarge the menus, the LCD is big, use all the LCD, why the fonts are small. .. this big device needs a bigger font... make the text bigger... many users are reporting about the font... I am from Iran, I really regret buying the device... I expect more from a big company like Jet Media I had it.. The signal magnification that improved was great. Now the rest of the menus and text and information should be bigger... Many of the LCDs are empty... Please support... Show the device's battery charge in numbers..

[Diduk]

Ну чё там ,,профи"" из gtmedia,долго нам новую прошивку ждать? Ух сейчас сделаем из этого говна, сатфайндер анало говнет

[CAJE]

Ну чё там ,,профи"" из gtmedia,долго нам новую прошивку ждать? Ух сейчас сделаем из этого говна, сатфайндер анало говнет

A new firmware has already been published here

[amir_931]

Please specify that Finder Pro is produced with H/W V1.00 version.. The new series of Finder production and production is with H/W V1.01... Friends, what is the reason for this difference... Is it possible to change?

[amir_931]

how can i flash H/W V1.01 to the device...my device is H/W V1.00...why these versions are different...thank you please guide me on this..which version Change my device to H/W V1.01...

[CAJE]

You cannot change the Hardware version, to know the correct version you always have to look at the motherboard

[amir_931]

Did the hardware version have a problem that the second version of the hardware was produced.. Now there are 2 versions of the software... Why did the company sell the hardware version that had a problem... Now what is the reason for the two hardware versions? The device I have is H/W V1.00 hardware version, but one of my friends has H/W V1.01 hardware version... what is the reason... please tell me the difference...

What was wrong with the hardware version that you changed the hardware... and because it was difficult to sell the early hardware versions in Europe, they were all sold in the Middle East... please clarify...

[Diduk]

Сколько по времени нам ждать ваши исправления по Т2? 1 год? 2года? Где ваш технический отдел? Если это железо,то как это исправить? Если программно,то сколько ждать нам новую прошивку?

Радости от покупки этого чуда нету,только одни вопросы

[C0D3R]

I sold my finder gtmedia v8 pro (hw version 1.0)
If this model is produced and optimized with a better structure, I will buy it again

[amir_931]

Jet Media does not have any tricks or taste in making Finder. Finder and signal information require expertise and technical team and know how to work. X Cruise Company or Alpine Set Company, they have expertise in signal finder. Jet Media Company has shown better satellite finder or signal in making satellite receiver. Jet Media Finder is more of a satellite receiver... It has a large 4.3 inch LCD, but all the menus are small and most of the LCD space is empty...

[amir_931]

I regretted buying the Jet Media signal finder... because it is version 0.1, the reason for the production of version 1.1 is not clear, and the company does not give any explanation as to the reason for the change of version and the problem... really, this money is not worth it... Now there is no program for the signal finder font. I wish I didn't buy it. Now I'm going to buy signal finder X Cruise model 7700pro. It doesn't have a picture, but it's accurate and efficient...Alpset and Dr.HD brands are not imported in our country, Iran...otherwise no one will go to Jet Media at all. .. Even now, all friends in Iran hate Jet Media... because of poor support... because of the small fonts, it's annoying when working, it can't be seen...

[amir_931]

For the sake of God, for the sake of Jesus Christ, the company should fix a few things, make the pro satellite finder font bigger, make the menus bigger... the battery display should be numerically specified, for example 99%... It does not find weak signals... add the Lnb not healthy option... add the cable not healthy option... perform better signal calibration... because it is clear that Jet Media's very weak technical team cannot handle it. .. The Media Star company, which is not very famous, produces excellent routers, gives new updates every week, and solves customer problems. It cares about opinions... It is far from the Jet Media company, which performs poorly...